[Ubuntu-zh] 如何安装这个setup,py文件？谢谢

[马利]

Python.h应该是个C头文件，在python的dev包中就有，安装相应版本的开发包就可以了

在08-2-29，赵汉杰 <lucky.hanjie at gmail.com> 写道：
>
> 谢谢，目前的问题是，肯能有个头文件有问题，好像是缺少python.h这个库，我想问问，这个库在哪里能找到呢？
> 如果能找到，那么又要放在在哪个文件夹里呢？谢谢
> hanjie at hanjie-laptop:~/polygraph-0.1.0$ python setup.py install
> running install
> running build
> running build_py
> creating build
> creating build/lib.linux-i686-2.5
> creating build/lib.linux-i686-2.5/polygraph
> copying polygraph/__init__.py -> build/lib.linux-i686-2.5/polygraph
> creating build/lib.linux-i686-2.5/polygraph/sigprob
> copying polygraph/sigprob/tokensplit.py -> build/lib.linux-i686-2.5
> /polygraph/sigprob
> copying polygraph/sigprob/sigprob.py -> build/lib.linux-i686-2.5
> /polygraph/sigprob
> copying polygraph/sigprob/__init__.py -> build/lib.linux-i686-2.5
> /polygraph/sigprob
> creating build/lib.linux-i686-2.5/polygraph/trace_crunching
> copying polygraph/trace_crunching/stream_trace.py -> build/lib.linux-
> i686-2.5/polygraph/trace_crunching
> copying polygraph/trace_crunching/priorprob.py -> build/lib.linux-i686-2.5
> /polygraph/trace_crunching
> copying polygraph/trace_crunching/sarray_trace.py -> build/lib.linux-
> i686-2.5/polygraph/trace_crunching
> copying polygraph/trace_crunching/pkts_to_streams.py -> build/lib.linux-
> i686-2.5/polygraph/trace_crunching
> copying polygraph/trace_crunching/priorprob_prune.py -> build/lib.linux-
> i686-2.5/polygraph/trace_crunching
> copying polygraph/trace_crunching/__init__.py -> build/lib.linux-i686-2.5
> /polygraph/trace_crunching
> creating build/lib.linux-i686-2.5/polygraph/worm_gen
> copying polygraph/worm_gen/atphttpd.py -> build/lib.linux-i686-2.5
> /polygraph/worm_gen
> copying polygraph/worm_gen/worm_gen.py -> build/lib.linux-i686-2.5
> /polygraph/worm_gen
> copying polygraph/worm_gen/clet.py -> build/lib.linux-i686-2.5
> /polygraph/worm_gen
> copying polygraph/worm_gen/bindTSIG.py -> build/lib.linux-i686-2.5
> /polygraph/worm_gen
> copying polygraph/worm_gen/__init__.py -> build/lib.linux-i686-2.5
> /polygraph/worm_gen
> copying polygraph/worm_gen/apache_host.py -> build/lib.linux-i686-2.5
> /polygraph/worm_gen
> copying polygraph/worm_gen/codered.py -> build/lib.linux-i686-2.5
> /polygraph/worm_gen
> copying polygraph/worm_gen/admmutate.py -> build/lib.linux-i686-2.5
> /polygraph/worm_gen
> creating build/lib.linux-i686-2.5/polygraph/sig_gen
> copying polygraph/sig_gen/bayes.py -> build/lib.linux-i686-2.5
> /polygraph/sig_gen
> copying polygraph/sig_gen/lcseq_tree.py -> build/lib.linux-i686-2.5
> /polygraph/sig_gen
> copying polygraph/sig_gen/lcs.py -> build/lib.linux-i686-2.5
> /polygraph/sig_gen
> copying polygraph/sig_gen/cluster.py -> build/lib.linux-i686-2.5
> /polygraph/sig_gen
> copying polygraph/sig_gen/sig_gen.py -> build/lib.linux-i686-2.5
> /polygraph/sig_gen
> copying polygraph/sig_gen/__init__.py -> build/lib.linux-i686-2.5
> /polygraph/sig_gen
> copying polygraph/sig_gen/bayes_tree.py -> build/lib.linux-i686-2.5
> /polygraph/sig_gen
> creating build/lib.linux-i686-2.5/polygraph/util
> copying polygraph/util/__init__.py -> build/lib.linux-i686-2.5
> /polygraph/util
> copying polygraph/util/sutil.py -> build/lib.linux-i686-2.5/polygraph/util
> copying polygraph/util/pysubseq.py -> build/lib.linux-i686-2.5
> /polygraph/util
> running build_ext
> building 'polygraph.util.pysubseqc' extension
> creating build/temp.linux-i686-2.5
> creating build/temp.linux-i686-2.5/polygraph
> creating build/temp.linux-i686-2.5/polygraph/pysubseq
> gcc -pthread -fno-strict-aliasing -DNDEBUG -g -O2 -Wall
> -Wstrict-prototypes -fPIC -I/usr/include/python2.5 -c
> polygraph/pysubseq/pysubseqc.c -o build/temp.linux-i686-2.5
> /polygraph/pysubseq/pysubseqc.o
> polygraph/pysubseq/pysubseqc.c:15:20: 错误： Python.h：No such file or
> directory
> polygraph/pysubseq/pysubseqc.c:18: 错误： expected ')' before '*' token
> polygraph/pysubseq/pysubseqc.c:33: 错误： expected '=', ',', ';', 'asm' or
> '__attribute__' before '*' token
> polygraph/pysubseq/pysubseqc.c:48: 错误： expected '=', ',', ';', 'asm' or
> '__attribute__' before '*' token
> polygraph/pysubseq/pysubseqc.c:74: 错误： expected '=', ',', ';', 'asm' or
> '__attribute__' before 'pysubseqc_funcs'
> polygraph/pysubseq/pysubseqc.c: 在函数 'initpysubseqc' 中：
> polygraph/pysubseq/pysubseqc.c:81: 警告： 隐式声明函数 'Py_InitModule3'
> polygraph/pysubseq/pysubseqc.c:83: 错误： 'pysubseqc_funcs' 未声明 (在此函数内第一次使用)
> polygraph/pysubseq/pysubseqc.c:83: 错误： (即使在一个函数内多次出现，每个未声明的标识符在其
> polygraph/pysubseq/pysubseqc.c:83: 错误： 所在的函数内只报告一次。)
> error: command 'gcc' failed with exit status 1
>
>
>
> 2008/2/29 马利 <richard.ma.19850509 at gmail.com>:
>
> > 看看帮助
> > python setup.py --help
> >
> > 在08-2-29，赵汉杰 <lucky.hanjie at gmail.com> 写道：
> > >
> > >  需要安装一个文件叫setup.py,但是我输入
> > > python setup.py
> > > 报错如下：
> > > usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
> > >    or: setup.py --help [cmd1 cmd2 ...]
> > >    or: setup.py --help-commands
> > >    or: setup.py cmd --help
> > > 估计是让我输入一个安装的目的路径，但是这个路径的格式是什么样子的呢？？
> > > 比如我想装到/home/hanjie这个路径下，输入的命令格式应该是什么样子的呢
> > >
> > > 谢谢！！！
> > >
> > > --
> > > Today is the last day of your life, so far!
> > > --
> > > ubuntu-zh mailing list
> > > ubuntu-zh at lists.ubuntu.com
> > > https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh
> > >
> > >
> >
> >
> > --
> > 马利
> > richard.ma
> > --
> > ubuntu-zh mailing list
> > ubuntu-zh at lists.ubuntu.com
> > https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh
> >
> >
>
>
> --
> Today is the last day of your life, so far!
>
> --
> ubuntu-zh mailing list
> ubuntu-zh at lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh
>
>


-- 
马利
richard.ma
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://lists.ubuntu.com/archives/ubuntu-zh/attachments/20080301/3c23a828/attachment-0001.htm