[ubuntu-za] Slow Ubuntu Installation

Charl Wentzel charl.wentzel at vodamail.co.za
Tue Jan 29 20:30:12 UTC 2013


On 29/01/2013 22:00, Charl Wentzel wrote:
> On 29/01/2013 18:28, Charl Wentzel wrote:
>>
>> Now, when I install any version of 10.04 (server, lubuntu, etc.) the 
>> installation completes without any issues.  In this my goal is Server 
>> Edition.  However, when I boot the device it goes into a crawl.  It 
>> takes nearly 4 minutes to get a login prompt.  Once you've entered 
>> the login details it takes over a minute to complete.  In fact it 
>> takes about 20 seconds before it even shows the normal login welcome 
>> info.  And so it goes.
>>
> I've had a look at a few of the log files, incl. syslog, dmesg and 
> kern.log.  It contains the boot history of two boot ups; the first on 
> the device that boots slowly and the second on the device that boots 
> normally.  I've included these files. I seemed to have exaggerated on 
> the times, however comparing the two boot logs clearly shows an order 
> of magnitude difference in boot time.
>
This is where it really gets interesting.  Attached here is the log 
files from the CF that was installed on the Via Eden devices and which 
boots properly on my Atom device.  The boot logs looks pretty identical 
up to the point where the network driver boots.  I don't understand much 
of it, but maybe some one else can make more sense of it.

Most interesting is the kernel logging which ends at ~6 secs and ~176 
secs (~3 mins) for the two boots, which indicates how bad the problem is.

Charl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-za/attachments/20130129/00b1c20b/attachment-0001.html>
-------------- next part --------------
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-45-generic (buildd at roseapple) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #102-Ubuntu SMP Wed Jan 2 21:53:06 UTC 2013 (Ubuntu 2.6.32-45.102-generic 2.6.32.60+drm33.26)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cf28b000 (usable)
[    0.000000]  BIOS-e820: 00000000cf28b000 - 00000000cf28d000 (reserved)
[    0.000000]  BIOS-e820: 00000000cf28d000 - 00000000cf2d0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf2d0000 - 00000000cf3da000 (usable)
[    0.000000]  BIOS-e820: 00000000cf3da000 - 00000000cf422000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf422000 - 00000000cf42a000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cf42a000 - 00000000cf42d000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf42d000 - 00000000cf455000 (reserved)
[    0.000000]  BIOS-e820: 00000000cf455000 - 00000000cf45e000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf45e000 - 00000000cf480000 (reserved)
[    0.000000]  BIOS-e820: 00000000cf480000 - 00000000cf600000 (usable)
[    0.000000]  BIOS-e820: 00000000cf600000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] DMI 2.6 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcf600 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0CF600000 mask FFFF00000 write-through
[    0.000000]   2 base 0CF700000 mask FFFF00000 uncachable
[    0.000000]   3 base 0CF800000 mask FFF800000 uncachable
[    0.000000]   4 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   5 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009ec00 (usable)
[    0.000000]  modified: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000cf28b000 (usable)
[    0.000000]  modified: 00000000cf28b000 - 00000000cf28d000 (reserved)
[    0.000000]  modified: 00000000cf28d000 - 00000000cf2d0000 (ACPI NVS)
[    0.000000]  modified: 00000000cf2d0000 - 00000000cf3da000 (usable)
[    0.000000]  modified: 00000000cf3da000 - 00000000cf422000 (ACPI NVS)
[    0.000000]  modified: 00000000cf422000 - 00000000cf42a000 (ACPI data)
[    0.000000]  modified: 00000000cf42a000 - 00000000cf42d000 (ACPI NVS)
[    0.000000]  modified: 00000000cf42d000 - 00000000cf455000 (reserved)
[    0.000000]  modified: 00000000cf455000 - 00000000cf45e000 (ACPI NVS)
[    0.000000]  modified: 00000000cf45e000 - 00000000cf480000 (reserved)
[    0.000000]  modified: 00000000cf480000 - 00000000cf600000 (usable)
[    0.000000]  modified: 00000000cf600000 - 00000000d0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 37850000 - 37fef77c
[    0.000000] Allocated new RAMDISK: 008ea000 - 0108977c
[    0.000000] Move RAMDISK from 0000000037850000 - 0000000037fef77b to 008ea000 - 0108977b
[    0.000000] ACPI: RSDP 000f0420 00024 (v03 ALASKA)
[    0.000000] ACPI: XSDT cf422078 00044 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP cf429a58 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - CF45BF40/00000000CF45BF80, using 32 (20090903/tbfadt-486)
[    0.000000] ACPI: DSDT cf422150 07904 (v02 ALASKA    A M I 00000001 INTL 20051117)
[    0.000000] ACPI: FACS cf45bf40 00040
[    0.000000] ACPI: APIC cf429b50 00072 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG cf429bc8 0003C (v01 A M I  ITL 945. 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET cf429c08 00038 (v01 ALASKA    A M I 01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2430MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008e5ef8]    TEXT DATA BSS ==> [0000100000 - 00008e5ef8]
[    0.000000]   #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
[    0.000000]   #5 [00008e6000 - 00008e916e]              BRK ==> [00008e6000 - 00008e916e]
[    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [00008ea000 - 000108977c]      NEW RAMDISK ==> [00008ea000 - 000108977c]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] found SMP MP-table at [c00fcd00] fcd00
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000cf600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000cf28b
[    0.000000]     0: 0x000cf2d0 -> 0x000cf3da
[    0.000000]     0: 0x000cf480 -> 0x000cf600
[    0.000000] On node 0 totalpages: 849059
[    0.000000] free_area_init_node: node 0, pgdat c07a0800, node_mem_map c108b200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3950 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4861 pages used for memmap
[    0.000000]   HighMem zone: 616986 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u1048576
[    0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 842422
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-45-generic root=UUID=b31a33a7-76be-4365-9323-1b7ccabe4fbc ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 16987840 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:000cf600)
[    0.000000] Memory: 3334860k/3397632k available (4702k kernel code, 60172k reserved, 2124k data, 664k init, 2487388k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07ab000 - 0xc0851000   ( 664 kB)
[    0.000000]       .data : 0xc0597a27 - 0xc07aadc8   (2124 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0597a27   (4702 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:440
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1800.108 MHz processor.
[    0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.21 BogoMIPS (lpj=7200432)
[    0.004041] Security Framework initialized
[    0.004076] AppArmor: AppArmor initialized
[    0.004091] Mount-cache hash table entries: 512
[    0.004307] Initializing cgroup subsys ns
[    0.004316] Initializing cgroup subsys cpuacct
[    0.004325] Initializing cgroup subsys memory
[    0.004338] Initializing cgroup subsys devices
[    0.004344] Initializing cgroup subsys freezer
[    0.004349] Initializing cgroup subsys net_cls
[    0.004383] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.004390] CPU: L2 cache: 512K
[    0.004395] CPU: Physical Processor ID: 0
[    0.004399] CPU: Processor Core ID: 0
[    0.004405] mce: CPU supports 5 MCE banks
[    0.004417] CPU0: Thermal monitoring enabled (TM1)
[    0.004424] using mwait in idle threads.
[    0.004434] Performance Events: Atom events, Intel PMU driver.
[    0.004446] ... version:                3
[    0.004451] ... bit width:              40
[    0.004455] ... generic registers:      2
[    0.004459] ... value mask:             000000ffffffffff
[    0.004464] ... max period:             000000007fffffff
[    0.004468] ... fixed-purpose events:   3
[    0.004472] ... event mask:             0000000700000003
[    0.004480] Checking 'hlt' instruction... OK.
[    0.020015] Disabling 4MB page tables to avoid TLB bug
[    0.023895] ACPI: Core revision 20090903
[    0.040026] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.040036] ftrace: allocating 21849 entries in 43 pages
[    0.044110] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.044379] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.084358] CPU0: Intel(R) Atom(TM) CPU D525   @ 1.80GHz stepping 0a
[    0.088005] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 0
[    0.008000] CPU1: Thermal monitoring enabled (TM1)
[    0.172114] CPU1: Intel(R) Atom(TM) CPU D525   @ 1.80GHz stepping 0a
[    0.172128] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.176229] Booting processor 2 APIC 0x2 ip 0x6000
[    0.008000] Initializing CPU#2
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU2: Thermal monitoring enabled (TM1)
[    0.264119] CPU2: Intel(R) Atom(TM) CPU D525   @ 1.80GHz stepping 0a
[    0.264132] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.268170] Booting processor 3 APIC 0x3 ip 0x6000
[    0.008000] Initializing CPU#3
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU3: Thermal monitoring enabled (TM1)
[    0.356068] CPU3: Intel(R) Atom(TM) CPU D525   @ 1.80GHz stepping 0a
[    0.356081] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.360046] Brought up 4 CPUs
[    0.360051] Total of 4 processors activated (16560.56 BogoMIPS).
[    0.361622] CPU0 attaching sched-domain:
[    0.361631]  domain 0: span 0-1 level SIBLING
[    0.361636]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[    0.361647]   domain 1: span 0-1 level MC
[    0.361652]    groups: 0-1 (cpu_power = 1178)
[    0.361660]    domain 2: span 0-3 level CPU
[    0.361665]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[    0.361681] CPU1 attaching sched-domain:
[    0.361685]  domain 0: span 0-1 level SIBLING
[    0.361689]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[    0.361700]   domain 1: span 0-1 level MC
[    0.361704]    groups: 0-1 (cpu_power = 1178)
[    0.361712]    domain 2: span 0-3 level CPU
[    0.361717]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[    0.361728] CPU2 attaching sched-domain:
[    0.361732]  domain 0: span 2-3 level SIBLING
[    0.361737]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[    0.361747]   domain 1: span 2-3 level MC
[    0.361752]    groups: 2-3 (cpu_power = 1178)
[    0.361760]    domain 2: span 0-3 level CPU
[    0.361764]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[    0.361776] CPU3 attaching sched-domain:
[    0.361780]  domain 0: span 2-3 level SIBLING
[    0.361785]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[    0.361795]   domain 1: span 2-3 level MC
[    0.361800]    groups: 2-3 (cpu_power = 1178)
[    0.361808]    domain 2: span 0-3 level CPU
[    0.361812]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[    0.362149] devtmpfs: initialized
[    0.362149] regulator: core version 0.5
[    0.362149] Time: 18:57:05  Date: 01/29/13
[    0.362149] NET: Registered protocol family 16
[    0.362149] Trying to unpack rootfs image as initramfs...
[    0.362149] EISA bus registered
[    0.362149] ACPI: bus type pci registered
[    0.362149] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.362149] PCI: Not using MMCONFIG.
[    0.381322] PCI: Using configuration type 1 for base access
[    0.381387] mtrr: your CPUs had inconsistent fixed MTRR settings
[    0.381392] mtrr: probably your BIOS does not setup all CPUs.
[    0.381395] mtrr: corrected configuration.
[    0.383096] bio: create slab <bio-0> at 0
[    0.385029] ACPI: EC: Look up EC in DSDT
[    0.391292] ACPI: Executed 1 blocks of module-level executable AML code
[    0.397649] ACPI: BIOS _OSI(Linux) query ignored
[    0.403243] ACPI: Interpreter enabled
[    0.403251] ACPI: (supports S0 S1 S4 S5)
[    0.403292] ACPI: Using IOAPIC for interrupt routing
[    0.403379] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.403518] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[    0.403524] PCI: Using MMCONFIG for extended config space
[    0.425207] ACPI: No dock devices found.
[    0.425665] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.425799] pci 0000:00:02.0: reg 10 32bit mmio: [0xfea80000-0xfeafffff]
[    0.425808] pci 0000:00:02.0: reg 14 io port: [0xf170-0xf177]
[    0.425815] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.425823] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe700000-0xfe7fffff]
[    0.425873] pci 0000:00:02.1: reg 10 32bit mmio: [0xfea00000-0xfea7ffff]
[    0.425970] pci 0000:00:1a.0: reg 20 io port: [0xf0a0-0xf0bf]
[    0.426025] pci 0000:00:1a.1: reg 20 io port: [0xf080-0xf09f]
[    0.426088] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfeb06000-0xfeb063ff]
[    0.426154] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.426161] pci 0000:00:1a.7: PME# disabled
[    0.426205] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeb00000-0xfeb03fff]
[    0.426263] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.426269] pci 0000:00:1b.0: PME# disabled
[    0.426352] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.426359] pci 0000:00:1c.0: PME# disabled
[    0.426461] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.426467] pci 0000:00:1c.4: PME# disabled
[    0.426551] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.426557] pci 0000:00:1c.5: PME# disabled
[    0.426607] pci 0000:00:1d.0: reg 20 io port: [0xf060-0xf07f]
[    0.426663] pci 0000:00:1d.1: reg 20 io port: [0xf040-0xf05f]
[    0.426718] pci 0000:00:1d.2: reg 20 io port: [0xf020-0xf03f]
[    0.426780] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeb05000-0xfeb053ff]
[    0.426846] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.426853] pci 0000:00:1d.7: PME# disabled
[    0.427000] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 001f)
[    0.427007] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 02e0 (mask 001f)
[    0.427014] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 02c0 (mask 001f)
[    0.427021] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0294 (mask 0003)
[    0.427081] pci 0000:00:1f.1: reg 10 io port: [0xf160-0xf167]
[    0.427091] pci 0000:00:1f.1: reg 14 io port: [0xf150-0xf153]
[    0.427100] pci 0000:00:1f.1: reg 18 io port: [0xf140-0xf147]
[    0.427110] pci 0000:00:1f.1: reg 1c io port: [0xf130-0xf133]
[    0.427119] pci 0000:00:1f.1: reg 20 io port: [0xf120-0xf12f]
[    0.427167] pci 0000:00:1f.2: reg 10 io port: [0xf110-0xf117]
[    0.427176] pci 0000:00:1f.2: reg 14 io port: [0xf100-0xf103]
[    0.427185] pci 0000:00:1f.2: reg 18 io port: [0xf0f0-0xf0f7]
[    0.427193] pci 0000:00:1f.2: reg 1c io port: [0xf0e0-0xf0e3]
[    0.427202] pci 0000:00:1f.2: reg 20 io port: [0xf0d0-0xf0df]
[    0.427211] pci 0000:00:1f.2: reg 24 io port: [0xf0c0-0xf0cf]
[    0.427241] pci 0000:00:1f.2: PME# supported from D3hot
[    0.427247] pci 0000:00:1f.2: PME# disabled
[    0.427272] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfeb04000-0xfeb040ff]
[    0.427292] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f]
[    0.427413] pci 0000:02:00.0: reg 10 io port: [0xe000-0xe0ff]
[    0.427437] pci 0000:02:00.0: reg 18 64bit mmio: [0xfe900000-0xfe900fff]
[    0.427454] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xe0100000-0xe0103fff]
[    0.427530] pci 0000:02:00.0: supports D1 D2
[    0.427534] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.427542] pci 0000:02:00.0: PME# disabled
[    0.427608] pci 0000:00:1c.4: bridge io port: [0xe000-0xefff]
[    0.427615] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[    0.427625] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xe0100000-0xe01fffff]
[    0.427678] pci 0000:03:00.0: reg 10 io port: [0xd000-0xd0ff]
[    0.427701] pci 0000:03:00.0: reg 18 64bit mmio: [0xfe800000-0xfe800fff]
[    0.427719] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xe0000000-0xe0003fff]
[    0.427794] pci 0000:03:00.0: supports D1 D2
[    0.427799] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.427806] pci 0000:03:00.0: PME# disabled
[    0.427867] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
[    0.427874] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[    0.427885] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xe0000000-0xe00fffff]
[    0.427942] pci 0000:00:1e.0: transparent bridge
[    0.427972] pci_bus 0000:00: on NUMA node 0
[    0.427982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.428203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.428502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PD._PRT]
[    0.428604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PE._PRT]
[    0.428704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.457326] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.457533] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.457734] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.457934] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.458135] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.458338] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.458544] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.458746] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.458975] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.458997] vgaarb: loaded
[    0.459229] SCSI subsystem initialized
[    0.459266] libata version 3.00 loaded.
[    0.459266] usbcore: registered new interface driver usbfs
[    0.459266] usbcore: registered new interface driver hub
[    0.459266] usbcore: registered new device driver usb
[    0.460141] ACPI: WMI: Mapper loaded
[    0.460146] PCI: Using ACPI for IRQ routing
[    0.460423] NetLabel: Initializing
[    0.460428] NetLabel:  domain hash size = 128
[    0.460431] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.460453] NetLabel:  unlabeled traffic allowed by default
[    0.460535] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.460543] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.460553] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.472092] Switching to clocksource tsc
[    0.477100] AppArmor: AppArmor Filesystem Enabled
[    0.477138] pnp: PnP ACPI init
[    0.477179] ACPI: bus type pnp registered
[    0.481545] pnp 00:05: IRQ 10 override to edge, high
[    0.482846] pnp 00:06: IRQ 10 override to edge, high
[    0.484201] pnp 00:07: IRQ 11 override to edge, high
[    0.485508] pnp 00:08: IRQ 10 override to edge, high
[    0.489240] pnp: PnP ACPI: found 18 devices
[    0.489246] ACPI: ACPI bus type pnp unregistered
[    0.489253] PnPBIOS: Disabled by ACPI PNP
[    0.489278] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.489285] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[    0.489299] system 00:02: ioport range 0x800-0x87f has been reserved
[    0.489305] system 00:02: ioport range 0x480-0x4bf has been reserved
[    0.489312] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.489319] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.489326] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.489333] system 00:02: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.489339] system 00:02: iomem range 0xffe00000-0xffffffff has been reserved
[    0.489352] system 00:03: ioport range 0x295-0x296 has been reserved
[    0.489370] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
[    0.524311] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.524318] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
[    0.524327] pci 0000:00:1c.0:   MEM window: 0xe0200000-0xe03fffff
[    0.524334] pci 0000:00:1c.0:   PREFETCH window: 0x000000e0400000-0x000000e05fffff
[    0.524344] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[    0.524350] pci 0000:00:1c.4:   IO window: 0xe000-0xefff
[    0.524357] pci 0000:00:1c.4:   MEM window: 0xfe900000-0xfe9fffff
[    0.524364] pci 0000:00:1c.4:   PREFETCH window: 0x000000e0100000-0x000000e01fffff
[    0.524373] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03
[    0.524379] pci 0000:00:1c.5:   IO window: 0xd000-0xdfff
[    0.524387] pci 0000:00:1c.5:   MEM window: 0xfe800000-0xfe8fffff
[    0.524394] pci 0000:00:1c.5:   PREFETCH window: 0x000000e0000000-0x000000e00fffff
[    0.524403] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.524407] pci 0000:00:1e.0:   IO window: disabled
[    0.524414] pci 0000:00:1e.0:   MEM window: disabled
[    0.524420] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.524443]   alloc irq_desc for 22 on node -1
[    0.524447]   alloc kstat_irqs on node -1
[    0.524460] pci 0000:00:1c.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.524468] pci 0000:00:1c.0: setting latency timer to 64
[    0.524481] pci 0000:00:1c.4: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.524488] pci 0000:00:1c.4: setting latency timer to 64
[    0.524499]   alloc irq_desc for 23 on node -1
[    0.524503]   alloc kstat_irqs on node -1
[    0.524511] pci 0000:00:1c.5: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    0.524518] pci 0000:00:1c.5: setting latency timer to 64
[    0.524528] pci 0000:00:1e.0: setting latency timer to 64
[    0.524535] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.524541] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.524547] pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
[    0.524552] pci_bus 0000:01: resource 1 mem: [0xe0200000-0xe03fffff]
[    0.524558] pci_bus 0000:01: resource 2 pref mem [0xe0400000-0xe05fffff]
[    0.524564] pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
[    0.524569] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff]
[    0.524575] pci_bus 0000:02: resource 2 pref mem [0xe0100000-0xe01fffff]
[    0.524580] pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
[    0.524586] pci_bus 0000:03: resource 1 mem: [0xfe800000-0xfe8fffff]
[    0.524591] pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xe00fffff]
[    0.524597] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.524602] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[    0.524674] NET: Registered protocol family 2
[    0.524858] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.525436] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.526296] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.526693] TCP: Hash tables configured (established 131072 bind 65536)
[    0.526699] TCP reno registered
[    0.526901] NET: Registered protocol family 1
[    0.526940] pci 0000:00:02.0: Boot video device
[    0.526963]   alloc irq_desc for 16 on node -1
[    0.526967]   alloc kstat_irqs on node -1
[    0.526979] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.527000] pci 0000:00:1a.0: PCI INT A disabled
[    0.527012]   alloc irq_desc for 21 on node -1
[    0.527016]   alloc kstat_irqs on node -1
[    0.527023] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.527042] pci 0000:00:1a.1: PCI INT B disabled
[    0.527057]   alloc irq_desc for 18 on node -1
[    0.527061]   alloc kstat_irqs on node -1
[    0.527068] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.527108] pci 0000:00:1a.7: PCI INT C disabled
[    0.527129] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.527147] pci 0000:00:1d.0: PCI INT A disabled
[    0.527158]   alloc irq_desc for 19 on node -1
[    0.527170]   alloc kstat_irqs on node -1
[    0.527178] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.527197] pci 0000:00:1d.1: PCI INT B disabled
[    0.527238] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.527256] pci 0000:00:1d.2: PCI INT C disabled
[    0.527272] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.527293] pci 0000:00:1d.7: PCI INT A disabled
[    0.527876] cpufreq-nforce2: No nForce2 chipset.
[    0.527930] Scanning for low memory corruption every 60 seconds
[    0.528139] audit: initializing netlink socket (disabled)
[    0.528158] type=2000 audit(1359485824.000:1): initialized
[    0.543693] highmem bounce pool size: 64 pages
[    0.543704] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.547003] VFS: Disk quotas dquot_6.5.2
[    0.547124] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.548391] fuse init (API version 7.13)
[    0.548576] msgmni has been set to 1657
[    0.549098] alg: No test for stdrng (krng)
[    0.549230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.549236] io scheduler noop registered
[    0.549240] io scheduler anticipatory registered
[    0.549244] io scheduler deadline registered
[    0.549334] io scheduler cfq registered (default)
[    0.549558]   alloc irq_desc for 24 on node -1
[    0.549563]   alloc kstat_irqs on node -1
[    0.549578] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.549590] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.549748]   alloc irq_desc for 25 on node -1
[    0.549752]   alloc kstat_irqs on node -1
[    0.549763] pcieport 0000:00:1c.4: irq 25 for MSI/MSI-X
[    0.549774] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.549932]   alloc irq_desc for 26 on node -1
[    0.549936]   alloc kstat_irqs on node -1
[    0.549948] pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
[    0.549958] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.550103] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.550130] Firmware did not grant requested _OSC control
[    0.550167] Firmware did not grant requested _OSC control
[    0.550191] Firmware did not grant requested _OSC control
[    0.550248] Firmware did not grant requested _OSC control
[    0.550271] Firmware did not grant requested _OSC control
[    0.550294] Firmware did not grant requested _OSC control
[    0.550322] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.550520] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.550533] ACPI: Power Button [PWRB]
[    0.550630] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.550636] ACPI: Power Button [PWRF]
[    0.575464] processor LNXCPU:00: registered as cooling_device0
[    0.599780] processor LNXCPU:01: registered as cooling_device1
[    0.627790] processor LNXCPU:02: registered as cooling_device2
[    0.652449] processor LNXCPU:03: registered as cooling_device3
[    0.662061] isapnp: Scanning for PnP cards...
[    0.665199] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.665321] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.665461] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.665582] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    0.665709] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[    0.666010] 00:04: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.666202] 00:05: ttyS2 at I/O 0x3e8 (irq = 10) is a 16550A
[    0.666394] 00:06: ttyS3 at I/O 0x2e8 (irq = 10) is a 16550A
[    0.666944] serial 00:07: disabled
[    0.667465] serial 00:08: disabled
[    0.667746] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.669963] brd: module loaded
[    0.670969] loop: module loaded
[    0.671151] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.671370] ata_piix 0000:00:1f.1: version 2.13
[    0.671393] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.671446] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.671600] scsi0 : ata_piix
[    0.671793] scsi1 : ata_piix
[    0.674405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf120 irq 14
[    0.674412] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf128 irq 15
[    0.674505] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    0.674551] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.806330] Freeing initrd memory: 7805k freed
[    0.827413] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.827638] scsi2 : ata_piix
[    0.827825] scsi3 : ata_piix
[    0.830893] ata3: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 18
[    0.830904] ata4: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 18
[    0.831880] Fixed MDIO Bus: probed
[    0.831976] PPP generic driver version 2.4.2
[    0.832100] tun: Universal TUN/TAP device driver, 1.6
[    0.832105] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[    0.832336] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.832372] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.832403] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.832411] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.832503] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.832560] ehci_hcd 0000:00:1a.7: debug port 1
[    0.836450] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.844353] ata1.01: CFA: InnoDisk. - InnoLite iCF 32GB, 20110407, max UDMA/66
[    0.844362] ata1.01: 62537328 sectors, multi 0: LBA 
[    0.844453] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfeb06000
[    0.859532] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.859617] ata1.01: configured for UDMA/66
[    0.859757] usb usb1: configuration #1 chosen from 1 choice
[    0.859822] hub 1-0:1.0: USB hub found
[    0.859839] hub 1-0:1.0: 4 ports detected
[    0.859931] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.859955] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.859961] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.860043] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.860088] ehci_hcd 0000:00:1d.7: debug port 1
[    0.863978] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.864005] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb05000
[    0.879350] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.879521] usb usb2: configuration #1 chosen from 1 choice
[    0.879578] hub 2-0:1.0: USB hub found
[    0.879592] hub 2-0:1.0: 6 ports detected
[    0.879699] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.879733] uhci_hcd: USB Universal Host Controller Interface driver
[    0.879791] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.879805] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.879811] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.879885] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.879929] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0a0
[    0.880121] usb usb3: configuration #1 chosen from 1 choice
[    0.880178] hub 3-0:1.0: USB hub found
[    0.880192] hub 3-0:1.0: 2 ports detected
[    0.880272] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.880284] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.880289] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.880355] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.880397] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f080
[    0.880586] usb usb4: configuration #1 chosen from 1 choice
[    0.880643] hub 4-0:1.0: USB hub found
[    0.880656] hub 4-0:1.0: 2 ports detected
[    0.880737] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.880749] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.880754] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.880825] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.880859] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060
[    0.881041] usb usb5: configuration #1 chosen from 1 choice
[    0.881098] hub 5-0:1.0: USB hub found
[    0.881112] hub 5-0:1.0: 2 ports detected
[    0.881195] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.881207] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.881212] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.881280] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.881323] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040
[    0.881516] usb usb6: configuration #1 chosen from 1 choice
[    0.881573] hub 6-0:1.0: USB hub found
[    0.881587] hub 6-0:1.0: 2 ports detected
[    0.881671] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.881682] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.881688] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.881759] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.881793] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f020
[    0.881980] usb usb7: configuration #1 chosen from 1 choice
[    0.882037] hub 7-0:1.0: USB hub found
[    0.882053] hub 7-0:1.0: 2 ports detected
[    0.882244] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.882759] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.882778] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.883170] mice: PS/2 mouse device common for all mice
[    0.883474] rtc_cmos 00:0a: RTC can wake from S4
[    0.883562] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[    0.883598] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.883892] device-mapper: uevent: version 1.0.3
[    0.884155] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[    0.884440] device-mapper: multipath: version 1.1.0 loaded
[    0.884447] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.884764] EISA: Probing bus 0 at eisa.0
[    0.884775] Cannot allocate resource for EISA slot 1
[    0.884806] EISA: Detected 0 cards.
[    0.885206] cpuidle: using governor ladder
[    0.885212] cpuidle: using governor menu
[    0.886256] TCP cubic registered
[    0.886697] NET: Registered protocol family 10
[    0.888652] NET: Registered protocol family 17
[    0.888772] Using IPI No-Shortcut mode
[    0.888983] PM: Resume from disk failed.
[    0.889010] registered taskstats version 1
[    0.889601]   Magic number: 13:500:1000
[    0.889643]  pnp1: hash matches
[    0.889659] system 00:02: hash matches
[    0.889734] rtc_cmos 00:0a: setting system clock to 2013-01-29 18:57:05 UTC (1359485825)
[    0.889742] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.889747] EDD information not available.
[    1.014991] isapnp: No Plug & Play device found
[    1.015219] scsi 0:0:1:0: Direct-Access     ATA      InnoDisk. - Inno 2011 PQ: 0 ANSI: 5
[    1.015527] sd 0:0:1:0: [sda] 62537328 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    1.015551] sd 0:0:1:0: Attached scsi generic sg0 type 0
[    1.015653] sd 0:0:1:0: [sda] Write Protect is off
[    1.015660] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.015723] sd 0:0:1:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    1.016050]  sda: sda1 sda2 < sda5 >
[    1.017635] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.320023] usb 5-1: new low speed USB device using uhci_hcd and address 2
[    1.422594] ata3.00: SATA link down (SStatus 0 SControl 300)
[    1.422610] ata3.01: SATA link down (SStatus 0 SControl 300)
[    1.478043] usb 5-1: configuration #1 chosen from 1 choice
[    2.120021] ata4.01: failed to resume link (SControl 0)
[    2.130610] ata4.00: SATA link down (SStatus 0 SControl 300)
[    2.130625] ata4.01: SATA link down (SStatus 0 SControl 0)
[    2.130683] Freeing unused kernel memory: 664k freed
[    2.131164] Write protecting the kernel text: 4704k
[    2.131229] Write protecting the kernel read-only data: 1848k
[    2.163726] udev: starting version 151
[    2.309497] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.309541] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.309600] r8169 0000:02:00.0: setting latency timer to 64
[    2.309612] r8169 0000:02:00.0: unknown MAC, using family default
[    2.309668]   alloc irq_desc for 27 on node -1
[    2.309674]   alloc kstat_irqs on node -1
[    2.309700] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[    2.311401] eth0: RTL8168b/8111b at 0xf8058000, 00:18:7d:24:b9:dc, XID 0c200000 IRQ 27
[    2.313356] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.313396]   alloc irq_desc for 17 on node -1
[    2.313403]   alloc kstat_irqs on node -1
[    2.313421] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.313482] r8169 0000:03:00.0: setting latency timer to 64
[    2.313494] r8169 0000:03:00.0: unknown MAC, using family default
[    2.313548]   alloc irq_desc for 28 on node -1
[    2.313555]   alloc kstat_irqs on node -1
[    2.313576] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[    2.315408] eth1: RTL8168b/8111b at 0xf805c000, 00:18:7d:24:b9:dd, XID 0c200000 IRQ 28
[    2.348856] usbcore: registered new interface driver hiddev
[    2.356326] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.356336] EXT4-fs (sda1): write access will be enabled during recovery
[    2.362341] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input3
[    2.362580] generic-usb 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1d.0-1/input0
[    2.386108] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input4
[    2.386329] generic-usb 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1d.0-1/input1
[    2.386403] usbcore: registered new interface driver usbhid
[    2.386413] usbhid: v2.6:USB HID core driver
[    4.109759] EXT4-fs (sda1): orphan cleanup on readonly fs
[    4.109776] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 527119
[    4.109828] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 527118
[    4.109849] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 527117
[    4.109868] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 527116
[    4.109887] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 527115
[    4.110546] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1569831
[    4.110664] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1569840
[    4.111355] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1569834
[    4.111401] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523323
[    4.113275] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1569946
[    4.115581] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523447
[    4.115629] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523268
[    4.115681] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523344
[    4.115720] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523345
[    4.117966] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1700645
[    4.118394] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523536
[    4.118512] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523556
[    4.118635] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523552
[    4.118673] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523543
[    4.118709] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523545
[    4.118745] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523539
[    4.118779] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523550
[    4.118819] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523538
[    4.118855] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523542
[    4.118892] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523547
[    4.118928] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523277
[    4.118971] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 656717
[    4.119011] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523636
[    4.119048] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523650
[    4.119085] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523630
[    4.119120] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523651
[    4.119154] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523641
[    4.119188] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523640
[    4.119223] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523645
[    4.119256] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523628
[    4.119291] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523342
[    4.119324] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523648
[    4.119359] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523666
[    4.119397] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523655
[    4.119431] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 523656
[    4.119463] EXT4-fs (sda1): 40 orphan inodes deleted
[    4.119470] EXT4-fs (sda1): recovery complete
[    4.216750] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    4.877054] udev: starting version 151
[    4.921112] Adding 1332216k swap on /dev/sda5.  Priority:-1 extents:1 across:1332216k 
[    5.041264] Linux agpgart interface v0.103
[    5.163997] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[    5.164776] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[    5.235314] lp: driver loaded but no devices found
[    5.235611] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    5.280478] type=1505 audit(1359485829.519:2):  operation="profile_load" pid=580 name="/sbin/dhclient3"
[    5.281249] type=1505 audit(1359485829.519:3):  operation="profile_load" pid=580 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    5.281688] type=1505 audit(1359485829.519:4):  operation="profile_load" pid=580 name="/usr/lib/connman/scripts/dhclient-script"
[    5.282527] type=1505 audit(1359485829.519:5):  operation="profile_replace" pid=581 name="/sbin/dhclient3"
[    5.283269] type=1505 audit(1359485829.519:6):  operation="profile_replace" pid=581 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    5.283714] type=1505 audit(1359485829.519:7):  operation="profile_replace" pid=581 name="/usr/lib/connman/scripts/dhclient-script"
[    5.431542] [drm] Initialized drm 1.1.0 20060810
[    5.551817] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.551831] i915 0000:00:02.0: setting latency timer to 64
[    5.565944] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[    5.565951] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    5.566068]   alloc irq_desc for 29 on node -1
[    5.566073]   alloc kstat_irqs on node -1
[    5.566086] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[    5.566096] [drm] set up 7M of stolen space
[    5.628204] [drm] initialized overlay support
[    6.075969] r8169: eth0: link up
[    6.075980] r8169: eth0: link up
[    6.104227] type=1505 audit(1359485830.519:8):  operation="profile_replace" pid=697 name="/sbin/dhclient3"
[    6.104959] type=1505 audit(1359485830.519:9):  operation="profile_replace" pid=697 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    6.105330] type=1505 audit(1359485830.519:10):  operation="profile_replace" pid=697 name="/usr/lib/connman/scripts/dhclient-script"
[    6.109044] type=1505 audit(1359485830.519:11):  operation="profile_load" pid=699 name="/usr/sbin/tcpdump"
[    6.120430] fb0: inteldrmfb frame buffer device
[    6.120438] registered panic notifier
[    6.123350] acpi device:26: registered as cooling_device4
[    6.125601] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    6.125743] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.125803] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.125889] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    6.125944] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    6.133734] vga16fb: initializing
[    6.133744] vga16fb: mapped to 0xc00a0000
[    6.133753] vga16fb: not registering due to another framebuffer present
[    6.226758] hda_codec: ALC888: BIOS auto-probing.
[    6.227730] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[    6.268539] [drm] Big FIFO is disabled
[    6.268552] [drm] Big FIFO is disabled
[    6.310986] type=1505 audit(1359485830.519:12):  operation="profile_load" pid=698 name="/usr/sbin/mysqld"
[    6.379261] Console: switching to colour frame buffer device 100x37

-------------- next part --------------
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-21-generic (buildd at rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cf28b000 (usable)
[    0.000000]  BIOS-e820: 00000000cf28b000 - 00000000cf28d000 (reserved)
[    0.000000]  BIOS-e820: 00000000cf28d000 - 00000000cf2d0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf2d0000 - 00000000cf3da000 (usable)
[    0.000000]  BIOS-e820: 00000000cf3da000 - 00000000cf422000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf422000 - 00000000cf42a000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cf42a000 - 00000000cf42d000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf42d000 - 00000000cf455000 (reserved)
[    0.000000]  BIOS-e820: 00000000cf455000 - 00000000cf45e000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf45e000 - 00000000cf480000 (reserved)
[    0.000000]  BIOS-e820: 00000000cf480000 - 00000000cf600000 (usable)
[    0.000000]  BIOS-e820: 00000000cf600000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] DMI 2.6 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcf600 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0CF600000 mask FFFF00000 write-through
[    0.000000]   2 base 0CF700000 mask FFFF00000 uncachable
[    0.000000]   3 base 0CF800000 mask FFF800000 uncachable
[    0.000000]   4 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   5 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009ec00 (usable)
[    0.000000]  modified: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000cf28b000 (usable)
[    0.000000]  modified: 00000000cf28b000 - 00000000cf28d000 (reserved)
[    0.000000]  modified: 00000000cf28d000 - 00000000cf2d0000 (ACPI NVS)
[    0.000000]  modified: 00000000cf2d0000 - 00000000cf3da000 (usable)
[    0.000000]  modified: 00000000cf3da000 - 00000000cf422000 (ACPI NVS)
[    0.000000]  modified: 00000000cf422000 - 00000000cf42a000 (ACPI data)
[    0.000000]  modified: 00000000cf42a000 - 00000000cf42d000 (ACPI NVS)
[    0.000000]  modified: 00000000cf42d000 - 00000000cf455000 (reserved)
[    0.000000]  modified: 00000000cf455000 - 00000000cf45e000 (ACPI NVS)
[    0.000000]  modified: 00000000cf45e000 - 00000000cf480000 (reserved)
[    0.000000]  modified: 00000000cf480000 - 00000000cf600000 (usable)
[    0.000000]  modified: 00000000cf600000 - 00000000d0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 3785b000 - 37fef43f
[    0.000000] Allocated new RAMDISK: 008de000 - 0107243f
[    0.000000] Move RAMDISK from 000000003785b000 - 0000000037fef43e to 008de000 - 0107243e
[    0.000000] ACPI: RSDP 000f0420 00024 (v03 ALASKA)
[    0.000000] ACPI: XSDT cf422078 00044 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP cf429a58 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - CF45BF40/00000000CF45BF80, using 32 (20090903/tbfadt-486)
[    0.000000] ACPI: DSDT cf422150 07904 (v02 ALASKA    A M I 00000001 INTL 20051117)
[    0.000000] ACPI: FACS cf45bf40 00040
[    0.000000] ACPI: APIC cf429b50 00072 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG cf429bc8 0003C (v01 A M I  ITL 945. 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET cf429c08 00038 (v01 ALASKA    A M I 01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2430MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
[    0.000000]   #5 [00008da000 - 00008dd16e]              BRK ==> [00008da000 - 00008dd16e]
[    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [00008de000 - 000107243f]      NEW RAMDISK ==> [00008de000 - 000107243f]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] found SMP MP-table at [c00fcd00] fcd00
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000cf600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000cf28b
[    0.000000]     0: 0x000cf2d0 -> 0x000cf3da
[    0.000000]     0: 0x000cf480 -> 0x000cf600
[    0.000000] On node 0 totalpages: 849059
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1074200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3950 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4861 pages used for memmap
[    0.000000]   HighMem zone: 616986 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36024 r0 d21320 u1048576
[    0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 842422
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=b31a33a7-76be-4365-9323-1b7ccabe4fbc ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 16987840 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:000cf600)
[    0.000000] Memory: 3334988k/3397632k available (4673k kernel code, 60080k reserved, 2122k data, 656k init, 2487388k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:440
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1799.866 MHz processor.
[    0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.73 BogoMIPS (lpj=7199464)
[    0.004040] Security Framework initialized
[    0.004078] AppArmor: AppArmor initialized
[    0.004092] Mount-cache hash table entries: 512
[    0.004299] Initializing cgroup subsys ns
[    0.004308] Initializing cgroup subsys cpuacct
[    0.004317] Initializing cgroup subsys memory
[    0.004330] Initializing cgroup subsys devices
[    0.004335] Initializing cgroup subsys freezer
[    0.004340] Initializing cgroup subsys net_cls
[    0.004373] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.004379] CPU: L2 cache: 512K
[    0.004384] CPU: Physical Processor ID: 0
[    0.004388] CPU: Processor Core ID: 0
[    0.004394] mce: CPU supports 5 MCE banks
[    0.004406] CPU0: Thermal monitoring enabled (TM1)
[    0.004413] using mwait in idle threads.
[    0.004423] Performance Events: Atom events, Intel PMU driver.
[    0.004438] ... version:                3
[    0.004442] ... bit width:              40
[    0.004446] ... generic registers:      2
[    0.004450] ... value mask:             000000ffffffffff
[    0.004455] ... max period:             000000007fffffff
[    0.004459] ... fixed-purpose events:   3
[    0.004463] ... event mask:             0000000700000003
[    0.004471] Checking 'hlt' instruction... OK.
[    0.020014] Disabling 4MB page tables to avoid TLB bug
[    0.023891] ACPI: Core revision 20090903
[    0.040024] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.040034] ftrace: allocating 21771 entries in 43 pages
[    0.044098] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.044367] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.084300] CPU0: Intel(R) Atom(TM) CPU D525   @ 1.80GHz stepping 0a
[    0.088001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 0
[    0.008000] CPU1: Thermal monitoring enabled (TM1)
[    0.172075] CPU1: Intel(R) Atom(TM) CPU D525   @ 1.80GHz stepping 0a
[    0.172100] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.176189] Booting processor 2 APIC 0x2 ip 0x6000
[    0.008000] Initializing CPU#2
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU2: Thermal monitoring enabled (TM1)
[    0.264061] CPU2: Intel(R) Atom(TM) CPU D525   @ 1.80GHz stepping 0a
[    0.264084] checking TSC synchronization [CPU#0 -> CPU#2]:
[    0.268001] Measured 9 cycles TSC warp between CPUs, turning off TSC clock.
[    0.268001] Marking TSC unstable due to check_tsc_sync_source failed
[    0.268156] Booting processor 3 APIC 0x3 ip 0x6000
[    0.008000] Initializing CPU#3
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU3: Thermal monitoring enabled (TM1)
[    0.356059] CPU3: Intel(R) Atom(TM) CPU D525   @ 1.80GHz stepping 0a
[    0.356105] Brought up 4 CPUs
[    0.356110] Total of 4 processors activated (16560.17 BogoMIPS).
[    0.357353] CPU0 attaching sched-domain:
[    0.357361]  domain 0: span 0-1 level SIBLING
[    0.357366]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[    0.357378]   domain 1: span 0-1 level MC
[    0.357383]    groups: 0-1 (cpu_power = 1178)
[    0.357391]    domain 2: span 0-3 level CPU
[    0.357396]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[    0.357410] CPU1 attaching sched-domain:
[    0.357414]  domain 0: span 0-1 level SIBLING
[    0.357419]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[    0.357429]   domain 1: span 0-1 level MC
[    0.357434]    groups: 0-1 (cpu_power = 1178)
[    0.357441]    domain 2: span 0-3 level CPU
[    0.357446]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[    0.357457] CPU2 attaching sched-domain:
[    0.357462]  domain 0: span 2-3 level SIBLING
[    0.357466]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[    0.357477]   domain 1: span 2-3 level MC
[    0.357481]    groups: 2-3 (cpu_power = 1178)
[    0.357489]    domain 2: span 0-3 level CPU
[    0.357493]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[    0.357505] CPU3 attaching sched-domain:
[    0.357509]  domain 0: span 2-3 level SIBLING
[    0.357514]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[    0.357524]   domain 1: span 2-3 level MC
[    0.357528]    groups: 2-3 (cpu_power = 1178)
[    0.357536]    domain 2: span 0-3 level CPU
[    0.357541]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[    0.357913] devtmpfs: initialized
[    0.357913] regulator: core version 0.5
[    0.357913] Time: 15:13:44  Date: 01/29/13
[    0.357913] NET: Registered protocol family 16
[    0.357913] Trying to unpack rootfs image as initramfs...
[    0.357913] EISA bus registered
[    0.357913] ACPI: bus type pci registered
[    0.357913] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.357913] PCI: Not using MMCONFIG.
[    0.376934] PCI: Using configuration type 1 for base access
[    0.376999] mtrr: your CPUs had inconsistent fixed MTRR settings
[    0.377003] mtrr: probably your BIOS does not setup all CPUs.
[    0.377007] mtrr: corrected configuration.
[    0.378733] bio: create slab <bio-0> at 0
[    0.380760] ACPI: EC: Look up EC in DSDT
[    0.387203] ACPI: Executed 1 blocks of module-level executable AML code
[    0.393610] ACPI: BIOS _OSI(Linux) query ignored
[    0.399381] ACPI: Interpreter enabled
[    0.399392] ACPI: (supports S0 S1 S4 S5)
[    0.399435] ACPI: Using IOAPIC for interrupt routing
[    0.399526] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.399671] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[    0.399676] PCI: Using MMCONFIG for extended config space
[    0.421920] ACPI: No dock devices found.
[    0.422389] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.422528] pci 0000:00:02.0: reg 10 32bit mmio: [0xfea80000-0xfeafffff]
[    0.422537] pci 0000:00:02.0: reg 14 io port: [0xf170-0xf177]
[    0.422545] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.422553] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe700000-0xfe7fffff]
[    0.422596] pci 0000:00:02.1: reg 10 32bit mmio: [0xfea00000-0xfea7ffff]
[    0.422686] pci 0000:00:1a.0: reg 20 io port: [0xf0a0-0xf0bf]
[    0.422740] pci 0000:00:1a.1: reg 20 io port: [0xf080-0xf09f]
[    0.422801] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfeb06000-0xfeb063ff]
[    0.422855] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.422862] pci 0000:00:1a.7: PME# disabled
[    0.422906] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeb00000-0xfeb03fff]
[    0.422951] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.422958] pci 0000:00:1b.0: PME# disabled
[    0.423032] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.423038] pci 0000:00:1c.0: PME# disabled
[    0.423114] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.423121] pci 0000:00:1c.4: PME# disabled
[    0.423190] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.423196] pci 0000:00:1c.5: PME# disabled
[    0.423247] pci 0000:00:1d.0: reg 20 io port: [0xf060-0xf07f]
[    0.423301] pci 0000:00:1d.1: reg 20 io port: [0xf040-0xf05f]
[    0.423355] pci 0000:00:1d.2: reg 20 io port: [0xf020-0xf03f]
[    0.423420] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeb05000-0xfeb053ff]
[    0.423473] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.423480] pci 0000:00:1d.7: PME# disabled
[    0.423611] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.423618] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.423625] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 001f)
[    0.423632] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 02e0 (mask 001f)
[    0.423639] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 02c0 (mask 001f)
[    0.423646] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0294 (mask 0003)
[    0.423693] pci 0000:00:1f.1: reg 10 io port: [0xf160-0xf167]
[    0.423703] pci 0000:00:1f.1: reg 14 io port: [0xf150-0xf153]
[    0.423712] pci 0000:00:1f.1: reg 18 io port: [0xf140-0xf147]
[    0.423722] pci 0000:00:1f.1: reg 1c io port: [0xf130-0xf133]
[    0.423731] pci 0000:00:1f.1: reg 20 io port: [0xf120-0xf12f]
[    0.423778] pci 0000:00:1f.2: reg 10 io port: [0xf110-0xf117]
[    0.423787] pci 0000:00:1f.2: reg 14 io port: [0xf100-0xf103]
[    0.423796] pci 0000:00:1f.2: reg 18 io port: [0xf0f0-0xf0f7]
[    0.423805] pci 0000:00:1f.2: reg 1c io port: [0xf0e0-0xf0e3]
[    0.423814] pci 0000:00:1f.2: reg 20 io port: [0xf0d0-0xf0df]
[    0.423823] pci 0000:00:1f.2: reg 24 io port: [0xf0c0-0xf0cf]
[    0.423846] pci 0000:00:1f.2: PME# supported from D3hot
[    0.423852] pci 0000:00:1f.2: PME# disabled
[    0.423877] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfeb04000-0xfeb040ff]
[    0.423898] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f]
[    0.424040] pci 0000:02:00.0: reg 10 io port: [0xe000-0xe0ff]
[    0.424064] pci 0000:02:00.0: reg 18 64bit mmio: [0xfe900000-0xfe900fff]
[    0.424081] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xe0100000-0xe0103fff]
[    0.424137] pci 0000:02:00.0: supports D1 D2
[    0.424141] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.424149] pci 0000:02:00.0: PME# disabled
[    0.424211] pci 0000:00:1c.4: bridge io port: [0xe000-0xefff]
[    0.424218] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[    0.424228] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xe0100000-0xe01fffff]
[    0.424285] pci 0000:03:00.0: reg 10 io port: [0xd000-0xd0ff]
[    0.424308] pci 0000:03:00.0: reg 18 64bit mmio: [0xfe800000-0xfe800fff]
[    0.424326] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xe0000000-0xe0003fff]
[    0.424375] pci 0000:03:00.0: supports D1 D2
[    0.424379] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.424387] pci 0000:03:00.0: PME# disabled
[    0.424448] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
[    0.424455] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[    0.424464] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xe0000000-0xe00fffff]
[    0.424517] pci 0000:00:1e.0: transparent bridge
[    0.424545] pci_bus 0000:00: on NUMA node 0
[    0.424555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.424758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.425059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PD._PRT]
[    0.425164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PE._PRT]
[    0.425268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.455012] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.455226] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.455436] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.455646] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.455854] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.456085] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.456302] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.456512] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.456732] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.456755] vgaarb: loaded
[    0.456980] SCSI subsystem initialized
[    0.457054] libata version 3.00 loaded.
[    0.457054] usbcore: registered new interface driver usbfs
[    0.457054] usbcore: registered new interface driver hub
[    0.457054] usbcore: registered new device driver usb
[    0.457054] ACPI: WMI: Mapper loaded
[    0.457054] PCI: Using ACPI for IRQ routing
[    0.457054] NetLabel: Initializing
[    0.457054] NetLabel:  domain hash size = 128
[    0.457054] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.457054] NetLabel:  unlabeled traffic allowed by default
[    0.457054] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.457054] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.472034] Switching to clocksource hpet
[    0.476474] AppArmor: AppArmor Filesystem Enabled
[    0.476511] pnp: PnP ACPI init
[    0.476567] ACPI: bus type pnp registered
[    0.481183] pnp 00:05: IRQ 10 override to edge, high
[    0.482612] pnp 00:06: IRQ 10 override to edge, high
[    0.484024] pnp 00:07: IRQ 11 override to edge, high
[    0.485425] pnp 00:08: IRQ 10 override to edge, high
[    0.489479] pnp: PnP ACPI: found 18 devices
[    0.489485] ACPI: ACPI bus type pnp unregistered
[    0.489492] PnPBIOS: Disabled by ACPI PNP
[    0.489537] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.489544] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[    0.489558] system 00:02: ioport range 0x800-0x87f has been reserved
[    0.489564] system 00:02: ioport range 0x480-0x4bf has been reserved
[    0.489572] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.489578] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.489585] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.489592] system 00:02: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.489598] system 00:02: iomem range 0xffe00000-0xffffffff has been reserved
[    0.489611] system 00:03: ioport range 0x295-0x296 has been reserved
[    0.489628] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
[    0.527248] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.527255] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
[    0.527263] pci 0000:00:1c.0:   MEM window: 0xe0200000-0xe03fffff
[    0.527270] pci 0000:00:1c.0:   PREFETCH window: 0x000000e0400000-0x000000e05fffff
[    0.527280] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[    0.527286] pci 0000:00:1c.4:   IO window: 0xe000-0xefff
[    0.527293] pci 0000:00:1c.4:   MEM window: 0xfe900000-0xfe9fffff
[    0.527300] pci 0000:00:1c.4:   PREFETCH window: 0x000000e0100000-0x000000e01fffff
[    0.527310] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03
[    0.527316] pci 0000:00:1c.5:   IO window: 0xd000-0xdfff
[    0.527323] pci 0000:00:1c.5:   MEM window: 0xfe800000-0xfe8fffff
[    0.527330] pci 0000:00:1c.5:   PREFETCH window: 0x000000e0000000-0x000000e00fffff
[    0.527339] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.527343] pci 0000:00:1e.0:   IO window: disabled
[    0.527350] pci 0000:00:1e.0:   MEM window: disabled
[    0.527356] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.527376]   alloc irq_desc for 22 on node -1
[    0.527381]   alloc kstat_irqs on node -1
[    0.527392] pci 0000:00:1c.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.527400] pci 0000:00:1c.0: setting latency timer to 64
[    0.527413] pci 0000:00:1c.4: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.527420] pci 0000:00:1c.4: setting latency timer to 64
[    0.527431]   alloc irq_desc for 23 on node -1
[    0.527435]   alloc kstat_irqs on node -1
[    0.527443] pci 0000:00:1c.5: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    0.527450] pci 0000:00:1c.5: setting latency timer to 64
[    0.527460] pci 0000:00:1e.0: setting latency timer to 64
[    0.527468] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.527473] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.527479] pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
[    0.527485] pci_bus 0000:01: resource 1 mem: [0xe0200000-0xe03fffff]
[    0.527490] pci_bus 0000:01: resource 2 pref mem [0xe0400000-0xe05fffff]
[    0.527496] pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
[    0.527502] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff]
[    0.527507] pci_bus 0000:02: resource 2 pref mem [0xe0100000-0xe01fffff]
[    0.527513] pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
[    0.527519] pci_bus 0000:03: resource 1 mem: [0xfe800000-0xfe8fffff]
[    0.527524] pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xe00fffff]
[    0.527530] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.527535] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[    0.527600] NET: Registered protocol family 2
[    0.527789] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.528385] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.529265] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.529703] TCP: Hash tables configured (established 131072 bind 65536)
[    0.529709] TCP reno registered
[    0.529908] NET: Registered protocol family 1
[    0.529948] pci 0000:00:02.0: Boot video device
[    0.530701] cpufreq-nforce2: No nForce2 chipset.
[    0.530760] Scanning for low memory corruption every 60 seconds
[    0.530971] audit: initializing netlink socket (disabled)
[    0.530990] type=2000 audit(1359472423.528:1): initialized
[    0.546652] highmem bounce pool size: 64 pages
[    0.546663] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.550521] VFS: Disk quotas dquot_6.5.2
[    0.550640] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.551863] fuse init (API version 7.13)
[    0.552045] msgmni has been set to 1657
[    0.552553] alg: No test for stdrng (krng)
[    0.552685] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.552691] io scheduler noop registered
[    0.552695] io scheduler anticipatory registered
[    0.552699] io scheduler deadline registered
[    0.552789] io scheduler cfq registered (default)
[    0.553026]   alloc irq_desc for 24 on node -1
[    0.553032]   alloc kstat_irqs on node -1
[    0.553051] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.553066] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.553234]   alloc irq_desc for 25 on node -1
[    0.553239]   alloc kstat_irqs on node -1
[    0.553250] pcieport 0000:00:1c.4: irq 25 for MSI/MSI-X
[    0.553261] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.553414]   alloc irq_desc for 26 on node -1
[    0.553418]   alloc kstat_irqs on node -1
[    0.553429] pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
[    0.553439] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.553605] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.553638] Firmware did not grant requested _OSC control
[    0.553668] Firmware did not grant requested _OSC control
[    0.553691] Firmware did not grant requested _OSC control
[    0.553747] Firmware did not grant requested _OSC control
[    0.553771] Firmware did not grant requested _OSC control
[    0.553793] Firmware did not grant requested _OSC control
[    0.553822] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.554028] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.554041] ACPI: Power Button [PWRB]
[    0.554138] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.554144] ACPI: Power Button [PWRF]
[    0.580544] processor LNXCPU:00: registered as cooling_device0
[    0.612562] processor LNXCPU:01: registered as cooling_device1
[    0.637147] processor LNXCPU:02: registered as cooling_device2
[    0.661498] processor LNXCPU:03: registered as cooling_device3
[    0.668366] isapnp: Scanning for PnP cards...
[    0.671491] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.671621] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.671762] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.671880] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    0.672001] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[    0.672305] 00:04: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.672498] 00:05: ttyS2 at I/O 0x3e8 (irq = 10) is a 16550A
[    0.672687] 00:06: ttyS3 at I/O 0x2e8 (irq = 10) is a 16550A
[    0.673264] serial 00:07: disabled
[    0.673786] serial 00:08: disabled
[    0.674063] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.676243] brd: module loaded
[    0.677281] loop: module loaded
[    0.677463] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.677670] ata_piix 0000:00:1f.1: version 2.13
[    0.677692]   alloc irq_desc for 19 on node -1
[    0.677697]   alloc kstat_irqs on node -1
[    0.677710] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.677766] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.677904] scsi0 : ata_piix
[    0.678079] scsi1 : ata_piix
[    0.680715] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf120 irq 14
[    0.680723] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf128 irq 15
[    0.680775]   alloc irq_desc for 18 on node -1
[    0.680779]   alloc kstat_irqs on node -1
[    0.680791] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    0.680799] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.800234] Freeing initrd memory: 7761k freed
[    0.837577] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.854380] scsi2 : ata_piix
[    0.854565] scsi3 : ata_piix
[    0.856975] ata3: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 18
[    0.856984] ata4: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 18
[    0.857796] Fixed MDIO Bus: probed
[    0.857869] PPP generic driver version 2.4.2
[    0.857966] tun: Universal TUN/TAP device driver, 1.6
[    0.857971] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[    0.858147] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.858185] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.858210] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.858216] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.858288] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.858328] ehci_hcd 0000:00:1a.7: debug port 1
[    0.861457] ata1.01: CFA: InnoDisk. - InnoLite iCF 32GB, 20110407, max UDMA/66
[    0.861465] ata1.01: 62537328 sectors, multi 0: LBA 
[    0.862206] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.862223] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfeb06000
[    0.877239] ata1.01: configured for UDMA/66
[    0.877519] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.877698] usb usb1: configuration #1 chosen from 1 choice
[    0.877759] hub 1-0:1.0: USB hub found
[    0.877774] hub 1-0:1.0: 4 ports detected
[    0.877868] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.877889] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.877895] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.877974] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.878009] ehci_hcd 0000:00:1d.7: debug port 1
[    0.881891] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.881921] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb05000
[    0.897519] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.897681] usb usb2: configuration #1 chosen from 1 choice
[    0.897738] hub 2-0:1.0: USB hub found
[    0.897753] hub 2-0:1.0: 6 ports detected
[    0.897860] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.897893] uhci_hcd: USB Universal Host Controller Interface driver
[    0.897951]   alloc irq_desc for 16 on node -1
[    0.897956]   alloc kstat_irqs on node -1
[    0.897967] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.897980] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.897985] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.898058] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.898103] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0a0
[    0.898281] usb usb3: configuration #1 chosen from 1 choice
[    0.898337] hub 3-0:1.0: USB hub found
[    0.898352] hub 3-0:1.0: 2 ports detected
[    0.898435]   alloc irq_desc for 21 on node -1
[    0.898440]   alloc kstat_irqs on node -1
[    0.898450] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.898460] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.898465] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.898532] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.898577] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f080
[    0.898748] usb usb4: configuration #1 chosen from 1 choice
[    0.898808] hub 4-0:1.0: USB hub found
[    0.898822] hub 4-0:1.0: 2 ports detected
[    0.898903] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.898913] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.898919] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.898992] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.899026] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060
[    0.899201] usb usb5: configuration #1 chosen from 1 choice
[    0.899262] hub 5-0:1.0: USB hub found
[    0.899275] hub 5-0:1.0: 2 ports detected
[    0.899357] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.899368] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.899373] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.899448] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.899493] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040
[    0.899672] usb usb6: configuration #1 chosen from 1 choice
[    0.899728] hub 6-0:1.0: USB hub found
[    0.899754] hub 6-0:1.0: 2 ports detected
[    0.899833] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.899843] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.899848] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.899914] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.899947] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f020
[    0.900123] usb usb7: configuration #1 chosen from 1 choice
[    0.900180] hub 7-0:1.0: USB hub found
[    0.900194] hub 7-0:1.0: 2 ports detected
[    0.900390] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.900885] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.900904] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.901097] mice: PS/2 mouse device common for all mice
[    0.901291] rtc_cmos 00:0a: RTC can wake from S4
[    0.901363] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[    0.901396] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.901648] device-mapper: uevent: version 1.0.3
[    0.901881] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[    0.902123] device-mapper: multipath: version 1.1.0 loaded
[    0.902129] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.902384] EISA: Probing bus 0 at eisa.0
[    0.902394] Cannot allocate resource for EISA slot 1
[    0.902421] EISA: Detected 0 cards.
[    0.902765] cpuidle: using governor ladder
[    0.902770] cpuidle: using governor menu
[    0.903644] TCP cubic registered
[    0.903974] NET: Registered protocol family 10
[    0.904860] lo: Disabled Privacy Extensions
[    0.905516] NET: Registered protocol family 17
[    0.905628] Using IPI No-Shortcut mode
[    0.905814] PM: Resume from disk failed.
[    0.905836] registered taskstats version 1
[    0.906323]   Magic number: 13:905:235
[    0.906444] rtc_cmos 00:0a: setting system clock to 2013-01-29 15:13:45 UTC (1359472425)
[    0.906451] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.906454] EDD information not available.
[    1.021274] isapnp: No Plug & Play device found
[    1.021499] scsi 0:0:1:0: Direct-Access     ATA      InnoDisk. - Inno 2011 PQ: 0 ANSI: 5
[    1.021795] sd 0:0:1:0: [sda] 62537328 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    1.021816] sd 0:0:1:0: Attached scsi generic sg0 type 0
[    1.021920] sd 0:0:1:0: [sda] Write Protect is off
[    1.021927] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.021989] sd 0:0:1:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    1.022321]  sda: sda1 sda2 < sda5 >
[    1.023937] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.392029] usb 5-1: new low speed USB device using uhci_hcd and address 2
[    1.549238] usb 5-1: configuration #1 chosen from 1 choice
[    1.592026] ata3.01: link resume succeeded after 1 retries
[    1.710598] ata3.00: SATA link down (SStatus 0 SControl 300)
[    1.710613] ata3.01: SATA link down (SStatus 0 SControl 300)
[    2.204023] ata4.01: failed to resume link (SControl 0)
[    2.214605] ata4.00: SATA link down (SStatus 0 SControl 300)
[    2.214620] ata4.01: SATA link down (SStatus 0 SControl 0)
[    2.214682] Freeing unused kernel memory: 656k freed
[    2.215150] Write protecting the kernel text: 4676k
[    2.215215] Write protecting the kernel read-only data: 1840k
[    2.247584] udev: starting version 151
[    2.406410] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.406451] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.406505] r8169 0000:02:00.0: setting latency timer to 64
[    2.406516] r8169 0000:02:00.0: unknown MAC, using family default
[    2.406568]   alloc irq_desc for 27 on node -1
[    2.406575]   alloc kstat_irqs on node -1
[    2.406597] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[    2.408365] eth0: RTL8168b/8111b at 0xf808a000, 00:18:7d:24:b9:dc, XID 0c200000 IRQ 27
[    2.421024] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.421062]   alloc irq_desc for 17 on node -1
[    2.421068]   alloc kstat_irqs on node -1
[    2.421085] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.421142] r8169 0000:03:00.0: setting latency timer to 64
[    2.421152] r8169 0000:03:00.0: unknown MAC, using family default
[    2.421201]   alloc irq_desc for 28 on node -1
[    2.421206]   alloc kstat_irqs on node -1
[    2.421226] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[    2.423006] eth1: RTL8168b/8111b at 0xf808e000, 00:18:7d:24:b9:dd, XID 0c200000 IRQ 28
[    2.436993] usbcore: registered new interface driver hiddev
[    2.441498] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    2.450664] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input3
[    2.450831] generic-usb 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1d.0-1/input0
[    2.474309] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input4
[    2.474468] generic-usb 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1d.0-1/input1
[    2.474514] usbcore: registered new interface driver usbhid
[    2.474521] usbhid: v2.6:USB HID core driver
[    3.779736] udev: starting version 151
[    3.784482] Adding 1332216k swap on /dev/sda5.  Priority:-1 extents:1 across:1332216k 
[    3.829567] lp: driver loaded but no devices found
[    3.988730] Linux agpgart interface v0.103
[    4.020646] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[    4.021659] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[    4.064703] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    4.175404] [drm] Initialized drm 1.1.0 20060810
[    4.342223] type=1505 audit(1359472428.934:2):  operation="profile_load" pid=680 name="/sbin/dhclient3"
[    4.342719] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.342732] i915 0000:00:02.0: setting latency timer to 64
[    4.342920] type=1505 audit(1359472428.934:3):  operation="profile_load" pid=680 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    4.343322] type=1505 audit(1359472428.934:4):  operation="profile_load" pid=680 name="/usr/lib/connman/scripts/dhclient-script"
[    4.359571] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[    4.359581] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    4.359745]   alloc irq_desc for 29 on node -1
[    4.359754]   alloc kstat_irqs on node -1
[    4.359774] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[    4.359789] [drm] set up 7M of stolen space
[    4.412976] r8169: eth0: link up
[    4.412984] r8169: eth0: link up
[    4.426059] [drm] initialized overlay support
[    4.466159] type=1505 audit(1359472429.059:5):  operation="profile_replace" pid=740 name="/sbin/dhclient3"
[    4.466712] type=1505 audit(1359472429.059:6):  operation="profile_replace" pid=740 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    4.467039] type=1505 audit(1359472429.059:7):  operation="profile_replace" pid=740 name="/usr/lib/connman/scripts/dhclient-script"
[    4.471055] type=1505 audit(1359472429.063:8):  operation="profile_load" pid=741 name="/usr/sbin/mysqld"
[    4.474907] type=1505 audit(1359472429.067:9):  operation="profile_load" pid=742 name="/usr/sbin/tcpdump"

-------------- next part --------------
A non-text attachment was scrubbed...
Name: kern.log
Type: text/x-log
Size: 290867 bytes
Desc: not available
URL: <https://lists.ubuntu.com/archives/ubuntu-za/attachments/20130129/00b1c20b/attachment-0001.bin>


More information about the ubuntu-za mailing list