[l-ubuntu-ve] (sin asunto)
Juan Hernandez
vladjanicek en gmail.com
Vie Ago 22 19:57:01 BST 2008
Fijate, sin ver aun tu respuesta te comento que yo tambien uso ubuntu
studio. Lo unico es q para operaciones regulares, utilizo el kernel regular
para usar wifi y otras cosas adicionales q el rt no soporta "fuera de la
caja". Solo cuando edito audio uso el rt
Slds
On Sat, Aug 23, 2008 at 2:21 PM, Angel Eduardo Laya Hernandez <
aelhernandez en gmail.com> wrote:
> Gracias Juan por la rapida respuesta
>
> Como informacion complementaria, la maquina es un AMD 2800.
>
> Aqui van los resultados
>
> Salida de dmesg
>
>
> [ 0.000000] Linux version 2.6.22-15-generic (buildd en king) (gcc version
> 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Fri Jul 11
> 18:56:36 UTC 2008 (Ubuntu 2.6.22-15.56-generic)
> [ 0.000000] Command line: root=UUID=d507aff2-4afd-46e9-9838-6a6d8840cdc2
> ro quiet splash
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bfc0000 (usable)
> [ 0.000000] BIOS-e820: 000000007bfc0000 - 000000007bfce000 (ACPI data)
> [ 0.000000] BIOS-e820: 000000007bfce000 - 000000007bff0000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000007bff0000 - 000000007c000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
> [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
> [ 0.000000] Entering add_active_range(0, 256, 507840) 1 entries of 3200
> used
> [ 0.000000] end_pfn_map = 1048576
> [ 0.000000] DMI 2.3 present.
> [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F8A90 checksum 0
> [ 0.000000] ACPI: RSDP 000F8A90, 0014 (r0 ACPIAM)
> [ 0.000000] ACPI: RSDT 7BFC0000, 0030 (r1 A M I OEMRSDT 8000530
> MSFT 97)
> [ 0.000000] ACPI: FACP 7BFC0200, 0084 (r2 A M I OEMFACP 8000530
> MSFT 97)
> [ 0.000000] ACPI: DSDT 7BFC03F0, 37D7 (r1 M86 M861 1 INTL
> 2002026)
> [ 0.000000] ACPI: FACS 7BFCE000, 0040
> [ 0.000000] ACPI: APIC 7BFC0390, 0054 (r1 A M I OEMAPIC 8000530
> MSFT 97)
> [ 0.000000] ACPI: OEMB 7BFCE040, 0046 (r1 A M I AMI_OEM 8000530
> MSFT 97)
> [ 0.000000] Scanning NUMA topology in Northbridge 24
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 0000000000000000-000000007bfc0000
> [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
> [ 0.000000] Entering add_active_range(0, 256, 507840) 1 entries of 3200
> used
> [ 0.000000] Bootmem setup node 0 0000000000000000-000000007bfc0000
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0 -> 4096
> [ 0.000000] DMA32 4096 -> 1048576
> [ 0.000000] Normal 1048576 -> 1048576
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0 -> 159
> [ 0.000000] 0: 256 -> 507840
> [ 0.000000] On node 0 totalpages: 507743
> [ 0.000000] DMA zone: 56 pages used for memmap
> [ 0.000000] DMA zone: 1128 pages reserved
> [ 0.000000] DMA zone: 2815 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 6887 pages used for memmap
> [ 0.000000] DMA32 zone: 496857 pages, LIFO batch:31
> [ 0.000000] Normal zone: 0 pages used for memmap
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] Processor #0 (Bootup-CPU)
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Setting APIC routing to flat
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
> 00000000000a0000
> [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
> 00000000000e7000
> [ 0.000000] swsusp: Registered nosave memory region: 00000000000e7000 -
> 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 80000000 (gap:
> 7c000000:83780000)
> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
> [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
> [ 0.000000] Built 1 zonelists. Total pages: 499672
> [ 0.000000] Kernel command line:
> root=UUID=d507aff2-4afd-46e9-9838-6a6d8840cdc2 ro quiet splash
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> [ 20.790397] time.c: Detected 1794.491 MHz processor.
> [ 20.792019] Console: colour VGA+ 80x25
> [ 20.792039] Checking aperture...
> [ 20.792043] CPU 0: aperture @ d0000000 size 256 MB
> [ 20.826357] Memory: 1991320k/2031360k available (2274k kernel code,
> 39652k reserved, 1185k data, 300k init)
> [ 20.826417] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4,
> CPUs=1, Nodes=1
> [ 20.904269] Calibrating delay using timer specific routine.. 3593.10
> BogoMIPS (lpj=7186218)
> [ 20.904312] Security Framework v1.0.0 initialized
> [ 20.904321] SELinux: Disabled at boot.
> [ 20.904518] Dentry cache hash table entries: 262144 (order: 9, 2097152
> bytes)
> [ 20.906805] Inode-cache hash table entries: 131072 (order: 8, 1048576
> bytes)
> [ 20.907996] Mount-cache hash table entries: 256
> [ 20.908197] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
> bytes/line)
> [ 20.908199] CPU: L2 Cache: 512K (64 bytes/line)
> [ 20.908203] CPU 0/0 -> Node 0
> [ 20.908227] SMP alternatives: switching to UP code
> [ 20.908521] Freeing SMP alternatives: 24k freed
> [ 20.909280] Early unpacking initramfs... done
> [ 21.243852] ACPI: Core revision 20070126
> [ 21.243922] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml
> not found.
> [ 21.286603] Using local APIC timer interrupts.
> [ 21.342270] result 12461749
> [ 21.342272] Detected 12.461 MHz APIC timer.
> [ 21.343829] Brought up 1 CPUs
> [ 21.344221] NET: Registered protocol family 16
> [ 21.344316] ACPI: bus type pci registered
> [ 21.344324] PCI: Using configuration type 1
> [ 21.347022] ACPI: EC: Look up EC in DSDT
> [ 21.352180] ACPI: Interpreter enabled
> [ 21.352183] ACPI: (supports S0 S1 S3 S4 S5)
> [ 21.352201] ACPI: Using IOAPIC for interrupt routing
> [ 21.362203] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 21.362210] PCI: Probing PCI hardware (bus 00)
> [ 21.363041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 21.363224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> [ 21.373730] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14
> 15)
> [ 21.373828] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14
> 15)
> [ 21.373921] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14
> 15)
> [ 21.374013] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14
> 15)
> [ 21.374106] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14
> 15) *0, disabled.
> [ 21.374198] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14
> 15) *0, disabled.
> [ 21.374291] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14
> 15) *0, disabled.
> [ 21.374383] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14
> 15) *0, disabled.
> [ 21.374458] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 21.374477] pnp: PnP ACPI init
> [ 21.374486] ACPI: bus type pnp registered
> [ 21.380572] pnp: PnP ACPI: found 14 devices
> [ 21.380575] ACPI: ACPI bus type pnp unregistered
> [ 21.380639] PCI: Using ACPI for IRQ routing
> [ 21.380642] PCI: If a device doesn't work, try "pci=routeirq". If it
> helps, post a report
> [ 21.380655] PCI: Cannot allocate resource region 0 of device
> 0000:00:00.0
> [ 21.380794] NET: Registered protocol family 8
> [ 21.380797] NET: Registered protocol family 20
> [ 21.380855] agpgart: Detected AGP bridge 0
> [ 21.389501] agpgart: AGP aperture is 256M @ 0xd0000000
> [ 21.389595] pnp: 00:0a: iomem range 0xfff80000-0xffffffff could not be
> reserved
> [ 21.389602] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been
> reserved
> [ 21.389606] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be
> reserved
> [ 21.389612] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
> [ 21.389615] pnp: 00:0d: iomem range 0x0-0x0 could not be reserved
> [ 21.389618] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be
> reserved
> [ 21.389622] pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be
> reserved
> [ 21.389886] PCI: Bridge: 0000:00:01.0
> [ 21.389888] IO window: disabled.
> [ 21.389893] MEM window: fca00000-feafffff
> [ 21.389897] PREFETCH window: f4900000-fc8fffff
> [ 21.389916] PCI: Setting latency timer of device 0000:00:01.0 to 64
> [ 21.389956] NET: Registered protocol family 2
> [ 21.391722] Time: tsc clocksource has been installed.
> [ 21.427769] IP route cache hash table entries: 65536 (order: 7, 524288
> bytes)
> [ 21.428649] TCP established hash table entries: 262144 (order: 10,
> 6291456 bytes)
> [ 21.436119] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 21.437379] TCP: Hash tables configured (established 262144 bind 65536)
> [ 21.437383] TCP reno registered
> [ 21.447835] checking if image is initramfs... it is
> [ 22.094719] Freeing initrd memory: 7201k freed
> [ 22.103524] audit: initializing netlink socket (disabled)
> [ 22.103538] audit(1219410323.264:1): initialized
> [ 22.105477] VFS: Disk quotas dquot_6.5.1
> [ 22.105537] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 22.105643] io scheduler noop registered
> [ 22.105645] io scheduler anticipatory registered
> [ 22.105647] io scheduler deadline registered
> [ 22.105739] io scheduler cfq registered (default)
> [ 22.105753] PCI: VIA PCI bridge detected. Disabling DAC.
> [ 22.106233] Boot video device is 0000:01:00.0
> [ 22.130442] Real Time Clock Driver v1.12ac
> [ 22.130547] Linux agpgart interface v0.102 (c) Dave Jones
> [ 22.130550] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
> sharing enabled
> [ 22.130643] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 22.130787] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 22.131348] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 22.132034] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
> blocksize
> [ 22.132225] input: Macintosh mouse button emulation as
> /class/input/input0
> [ 22.132301] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
> 0x60,0x64
> irq 1,12
> [ 22.132711] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 22.132716] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 22.132878] mice: PS/2 mouse device common for all mice
> [ 22.133095] TCP cubic registered
> [ 22.133169] NET: Registered protocol family 1
> [ 22.133395]
> /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to
> open rtc device (rtc0)
> [ 22.133403] Freeing unused kernel memory: 300k freed
> [ 22.203312] input: AT Translated Set 2 keyboard as /class/input/input1
> [ 23.328314] AppArmor: AppArmor initialized<5>audit(1219410324.488:2):
> type=1505 info="AppArmor initialized" pid=1211
> [ 23.335910] fuse init (API version 7.8)
> [ 23.340593] Failure registering capabilities with primary security
> module.
> [ 23.350501] ACPI: Processor [CPU1] (supports 16 throttling states)
> [ 23.993581] SCSI subsystem initialized
> [ 23.998914] libata version 2.21 loaded.
> [ 24.000302] sata_via 0000:00:0f.0: version 2.2
> [ 24.000329] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low)
> ->
> IRQ 20
> [ 24.000386] sata_via 0000:00:0f.0: routed to hard irq line 11
> [ 24.000508] scsi0 : sata_via
> [ 24.000557] scsi1 : sata_via
> [ 24.000586] ata1: SATA max UDMA/133 cmd 0x000000000001ec00 ctl
> 0x000000000001e802 bmdma 0x000000000001dc00 irq 20
> [ 24.000590] ata2: SATA max UDMA/133 cmd 0x000000000001e400 ctl
> 0x000000000001e002 bmdma 0x000000000001dc08 irq 20
> [ 24.029240] usbcore: registered new interface driver usbfs
> [ 24.029270] usbcore: registered new interface driver hub
> [ 24.029294] usbcore: registered new device driver usb
> [ 24.030159] USB Universal Host Controller Interface driver v3.0
> [ 24.130215] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald
> Becker
> [ 24.204565] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
> [ 24.253584] Floppy drive(s): fd0 is 1.44M
> [ 24.276291] FDC 0 is a post-1991 82077
> [ 24.420310] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 24.608383] ata2.00: ATA-8: SAMSUNG HD161HJ, GF100-07, max UDMA7
> [ 24.608387] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 24.620367] ata2.00: configured for UDMA/133
> [ 24.620495] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD161HJ
> GF10 PQ: 0 ANSI: 5
> [ 24.622072] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low)
> ->
> IRQ 21
> [ 24.622089] uhci_hcd 0000:00:10.0: UHCI Host Controller
> [ 24.622343] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
> number 1
> [ 24.622376] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c400
> [ 24.622540] usb usb1: configuration #1 chosen from 1 choice
> [ 24.622568] hub 1-0:1.0: USB hub found
> [ 24.622578] hub 1-0:1.0: 2 ports detected
> [ 24.630819] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors
> (160042
> MB)
> [ 24.630835] sd 1:0:0:0: [sda] Write Protect is off
> [ 24.630838] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 24.630853] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 24.630915] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors
> (160042
> MB)
> [ 24.630923] sd 1:0:0:0: [sda] Write Protect is off
> [ 24.630926] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 24.630938] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 24.630945] sda: sda1 sda2 < sda5 >
> [ 24.676313] sd 1:0:0:0: [sda] Attached SCSI disk
> [ 24.680552] sd 1:0:0:0: Attached scsi generic sg0 type 0
> [ 24.728124] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low)
> ->
> IRQ 21
> [ 24.728138] uhci_hcd 0000:00:10.1: UHCI Host Controller
> [ 24.728164] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
> number 2
> [ 24.728188] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c800
> [ 24.728285] usb usb2: configuration #1 chosen from 1 choice
> [ 24.728314] hub 2-0:1.0: USB hub found
> [ 24.728319] hub 2-0:1.0: 2 ports detected
> [ 24.836010] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low)
> ->
> IRQ 21
> [ 24.836024] uhci_hcd 0000:00:10.2: UHCI Host Controller
> [ 24.836049] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
> number 3
> [ 24.836074] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000cc00
> [ 24.836196] usb usb3: configuration #1 chosen from 1 choice
> [ 24.836223] hub 3-0:1.0: USB hub found
> [ 24.836232] hub 3-0:1.0: 2 ports detected
> [ 24.855107] Attempting manual resume
> [ 24.855112] swsusp: Resume From Partition 8:5
> [ 24.855114] PM: Checking swsusp image.
> [ 24.855367] PM: Resume from disk failed.
> [ 24.902492] kjournald starting. Commit interval 5 seconds
> [ 24.902505] EXT3-fs: mounted filesystem with ordered data mode.
> [ 24.943860] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low)
> ->
> IRQ 21
> [ 24.943875] uhci_hcd 0000:00:10.3: UHCI Host Controller
> [ 24.943906] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus
> number 4
> [ 24.943930] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d000
> [ 24.944043] usb usb4: configuration #1 chosen from 1 choice
> [ 24.944069] hub 4-0:1.0: USB hub found
> [ 24.944078] hub 4-0:1.0: 2 ports detected
> [ 25.051872] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low)
> ->
> IRQ 21
> [ 25.052072] ehci_hcd 0000:00:10.4: EHCI Host Controller
> [ 25.052152] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
> number 5
> [ 25.052201] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff400
> [ 25.052208] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10
> Dec 2004
> [ 25.052323] usb usb5: configuration #1 chosen from 1 choice
> [ 25.052352] hub 5-0:1.0: USB hub found
> [ 25.052360] hub 5-0:1.0: 8 ports detected
> [ 25.159875] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low)
> ->
> IRQ 23
> [ 25.163904] eth0: VIA Rhine II at 0x1d400, 00:14:2a:c5:a1:af, IRQ 23.
> [ 25.164622] eth0: MII PHY found at address 1, status 0x786d advertising
> 01e1 Link 41e1.
> [ 26.338134] usb 2-2: new full speed USB device using uhci_hcd and
> address
> 2
> [ 26.513320] usb 2-2: configuration #1 chosen from 1 choice
> [ 33.147785] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 33.368997] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 33.643304] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> [ 33.646475] ide: Assuming 33MHz system bus speed for PIO modes; override
> with idebus=xx
> [ 33.950474] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
> [ 33.950496] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low)
> ->
> IRQ 20
> [ 33.950509] VP_IDE: chipset revision 6
> [ 33.950511] VP_IDE: not 100% native mode: will probe irqs later
> [ 33.950523] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on
> pci0000:00:0f.1
> [ 33.950532] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA,
> hdb:pio
> [ 33.950543] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA,
> hdd:DMA
> [ 33.950550] Probing IDE interface ide0...
> [ 34.078104] input: PC Speaker as /class/input/input2
> [ 34.094498] irda_init()
> [ 34.094525] NET: Registered protocol family 23
> [ 34.419119] Linux video capture interface: v2.00
> [ 34.489017] hda: ExcelStor Technology J880, ATA DISK drive
> [ 34.499746]
>
> /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/ov511/ov511.c:
> USB OV511+ video device found
> [ 34.501187]
>
> /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/ov511/ov511.c:
> model: Creative Labs WebCam 3
> [ 34.585507] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
> [ 34.588866] parport_pc 00:09: reported by Plug and Play ACPI
> [ 34.588929] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
> [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> [ 34.789840]
>
> /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/ov511/ov511.c:
> Sensor is an OV7620
> [ 35.160441] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [ 35.167235] Probing IDE interface ide1...
> [ 35.248491]
>
> /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/ov511/ov511.c:
> Device at usb-0000:00:10.1-2 registered to minor 0
> [ 35.248516] usbcore: registered new interface driver ov511
> [ 35.248520]
>
> /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/ov511/ov511.c:
> v1.64 for Linux 2.5 : ov511 USB Camera Driver
> [ 36.031238] hdc: BENQ DVD-ROM 16X, ATAPI CD/DVD-ROM drive
> [ 36.814348] hdd: SAMSUNG CD-R/RW SW-252B, ATAPI CD/DVD-ROM drive
> [ 36.872495] ide1 at 0x170-0x177,0x376 on irq 15
> [ 36.879462] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low)
> ->
> IRQ 18
> [ 36.910839] hda: max request size: 512KiB
> [ 36.911941] hda: 160836480 sectors (82348 MB) w/1719KiB Cache,
> CHS=16383/255/63, UDMA(133)
> [ 36.912103] hda: cache flushes supported
> [ 36.912156] hda: hda1
> [ 36.974193] hdc: ATAPI 50X DVD-ROM drive, 512kB Cache, UDMA(33)
> [ 36.974202] Uniform CD-ROM driver Revision: 3.20
> [ 36.978288] hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
> [ 37.648867] lp0: using parport0 (interrupt-driven).
> [ 37.726535] Adding 5855652k swap on /dev/sda5. Priority:-1 extents:1
> across:5855652k
> [ 38.147534] EXT3 FS on sda1, internal journal
> [ 39.229377] input: Power Button (FF) as /class/input/input4
> [ 39.234261] ACPI: Power Button (FF) [PWRF]
> [ 39.261717] input: Sleep Button (CM) as /class/input/input5
> [ 39.266571] ACPI: Sleep Button (CM) [SLPB]
> [ 39.294025] input: Power Button (CM) as /class/input/input6
> [ 39.298849] ACPI: Power Button (CM) [PWRB]
> [ 39.326337] No dock devices found.
> [ 39.610725] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 2800+
> processors (version 2.00.00)
> [ 39.610766] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x2
> [ 39.610769] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
> [ 40.881072] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
> [ 40.891023] Failure registering capabilities with primary security
> module.
> [ 41.108960] ppdev: user-space parallel port driver
> [ 41.221787] audit(1219426542.678:3): type=1503
> operation="inode_permission" requested_mask="a" denied_mask="a"
> name="/dev/tty" pid=4603 profile="/usr/sbin/cupsd"
> [ 41.886768] Bluetooth: Core ver 2.11
> [ 41.886873] NET: Registered protocol family 31
> [ 41.886876] Bluetooth: HCI device and connection manager initialized
> [ 41.886880] Bluetooth: HCI socket layer initialized
> [ 42.019961] Bluetooth: L2CAP ver 2.8
> [ 42.019967] Bluetooth: L2CAP socket layer initialized
> [ 42.053433] Bluetooth: RFCOMM socket layer initialized
> [ 42.053515] Bluetooth: RFCOMM TTY layer initialized
> [ 42.053518] Bluetooth: RFCOMM ver 1.8
> [ 42.837201] Marking TSC unstable due to cpufreq changes
> [ 42.838674] Time: acpi_pm clocksource has been installed.
> [ 43.646532] [drm] Initialized drm 1.1.0 20060810
> [ 43.666072] [drm] Initialized via 2.11.1 20070202 on minor 0
> [ 43.666278] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low)
> ->
> IRQ 16
> [ 43.668554] [drm] Initialized via 2.11.1 20070202 on minor 1
> [ 43.686241] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
> [ 43.686451] agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8
> mode.
> [ 43.686605] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
> [ 43.686812] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
> [ 43.937177] irq 16: nobody cared (try booting with the "irqpoll" option)
> [ 43.937183]
> [ 43.937184] Call Trace:
> [ 43.937187] <IRQ> [<ffffffff8026ab1e>] __report_bad_irq+0x1e/0x80
> [ 43.937210] [<ffffffff8026ae03>] note_interrupt+0x283/0x2c0
> [ 43.937220] [<ffffffff8026b96d>] handle_fasteoi_irq+0xdd/0x110
> [ 43.937225] [<ffffffff8020b01c>] call_softirq+0x1c/0x30
> [ 43.937231] [<ffffffff8020c6ab>] do_IRQ+0x7b/0x100
> [ 43.937237] [<ffffffff8020a3a1>] ret_from_intr+0x0/0xa
> [ 43.937239] <EOI>
> [ 43.937251] handlers:
> [ 43.937253] [<ffffffff88361490>] (via_driver_irq_handler+0x0/0x1e0
> [via])
> [ 43.937262] Disabling IRQ #16
> [ 43.993309] NET: Registered protocol family 10
> [ 43.993447] lo: Disabled Privacy Extensions
> [ 44.738347] NET: Registered protocol family 17
> [ 51.772720] eth0: no IPv6 routers present
>
>
> Salida lspci
>
> 00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
> 00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
> 00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
> 00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
> 00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
> 00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890
> South]
> 00:09.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
> 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID
> Controller (rev 80)
> 00:0f.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
> [KT600/K8T800/K8T890 South]
> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev
> 78)
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> DRAM
> Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro
> VGA Adapter (rev 01)
>
> Gracias
>
>
> --
> Angel E. Laya Hernández
> Web Designer & Programmer / Project leader / Photographer
> http://aelhernandez.com/
> LinuxUser= 451483
> _______________________________________________
> Lista de correo (ubuntu-ve)
> Fraternidad Ubuntu Linux de Venezuela
> (Official VenezuelanTeam)
> _______________________________________________
> ubuntu-ve mailing list
> ubuntu-ve en lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ve
> www.ubuntu-ve.org<https://lists.ubuntu.com/mailman/listinfo/ubuntu-vewww.ubuntu-ve.org>|
> www.ubuntu.org.ve
> _______________________________________________
> Modifica tus opciones de suscripción o desuscribete en:
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ve
>
Más información sobre la lista de distribución ubuntu-ve