<div class="gmail_quote">On 3 October 2011 16:39, Jason Arkell <<a href="mailto:jason.arkell@hotmail.com">jason.arkell@hotmail.com</a>> wrote: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"> <div> <div> <div>What about a manual install. Try choosing edit connection from the network icon and adding the connection manually under mobile. </div></div></div></blockquote><div> I removed usb_modeswitch and installed it again and I still get the same result... I enabled logging in usb_modeswitch.conf and I see that the the device is detected and reported as switched, but its actually not happening. <code> USB_ModeSwitch log from Mon Oct 03 18:31:48 UTC 2011 raw args from udev: /1-1:1.0 Using global config file: /etc/usb_modeswitch.conf Bus ID for device not given by udev. Trying to determine it from kernel name (1-1:1.0) ... USB dir exists: /sys/bus/usb/devices/1-1 Warning: USB attribute "serial" not found. ---------------- USB values from sysfs: manufacturer HUAWEI product HUAWEI Mobile serial ---------------- Found packed config collection /usr/share/usb_modeswitch/configPack.tar.gz Searching overriding entries named: /etc/usb_modeswitch.d/12d1:1c0b* SCSI attributes not needed, moving on checking config: 12d1:1c0b Extracting config 12d1:1c0b from collection /usr/share/usb_modeswitch/configPack.tar.gz ! matched, now switching (running command: /usr/sbin/usb_modeswitch -I -W -c /var/lib/usb_modeswitch/current_cfg) </code> The configuration file being run actually does switch the device when I manually run usb_modeswitch -c /var/lib/usb_modeswitch/current_cfg. What I am looking for is a way to get this device to actually switch correctly, once the device is plugged in. </div></div>-- Mike Of course, you might discount this possibility, but remember that one in a million chances happen 99% of the time. ------------------------------------------------------------