mike@mike-desktop:~$ dmesg [17179569.184000] Linux version 2.6.17-10-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5 22:28:26 UTC 2006 (Ubuntu 2.6.17-10.34-generic) [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) [17179569.184000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data) [17179569.184000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [17179569.184000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [17179569.184000] 126MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] found SMP MP-table at 000f3ff0 [17179569.184000] On node 0 totalpages: 261872 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 32496 pages, LIFO batch:7 [17179569.184000] DMI 2.4 present. [17179569.184000] ACPI: RSDP (v000 RS480 ) @ 0x000f7f10 [17179569.184000] ACPI: RSDT (v001 RS480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef3040 [17179569.184000] ACPI: FADT (v002 RS480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef30c0 [17179569.184000] ACPI: MCFG (v001 RS480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef6d00 [17179569.184000] ACPI: MADT (v001 RS480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef6c40 [17179569.184000] ACPI: DSDT (v001 RS480 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x4008 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [17179569.184000] Processor #0 15:15 APIC version 16 [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [17179569.184000] ACPI: IRQ0 used by override. [17179569.184000] ACPI: IRQ2 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/hda4 ro quiet splash [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Enabling fast FPU save and restore... done. [17179569.184000] Enabling unmasked SIMD FPU exception support... done. [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes) [17179569.184000] Detected 2189.217 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour VGA+ 80x25 [17179572.172000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179572.172000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [17179572.188000] Memory: 1028628k/1047488k available (1910k kernel code, 18092k reserved, 1069k data, 308k init, 129984k highmem) [17179572.188000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179572.268000] Calibrating delay using timer specific routine.. 4384.43 BogoMIPS (lpj=8768872) [17179572.268000] Security Framework v1.0.0 initialized [17179572.268000] SELinux: Disabled at boot. [17179572.268000] Mount-cache hash table entries: 512 [17179572.268000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 [17179572.268000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 [17179572.268000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [17179572.268000] CPU: L2 Cache: 512K (64 bytes/line) [17179572.268000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 [17179572.268000] Checking 'hlt' instruction... OK. [17179572.284000] SMP alternatives: switching to UP code [17179572.284000] Freeing SMP alternatives: 16k freed [17179572.284000] checking if image is initramfs... it is [17179572.684000] Freeing initrd memory: 5322k freed [17179572.684000] ACPI: Core revision 20060707 [17179572.696000] ACPI: Looking for DSDT ... not found! [17179572.696000] ACPI: System reset via FADT Reset Register is supported [17179572.696000] machine_reset = acpi_machine_reset [17179572.700000] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02 [17179572.700000] Total of 1 processors activated (4384.43 BogoMIPS). [17179572.700000] ENABLING IO-APIC IRQs [17179572.700000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [17179572.888000] Brought up 1 CPUs [17179572.888000] migration_cost=0 [17179572.888000] NET: Registered protocol family 16 [17179572.888000] EISA bus registered [17179572.888000] ACPI: bus type pci registered [17179572.888000] PCI: Using MMCONFIG [17179572.888000] PCI: No mmconfig possible on 0:18 [17179572.888000] Setting up standard PCI resources [17179572.912000] ACPI: Interpreter enabled [17179572.912000] ACPI: Using IOAPIC for interrupt routing [17179572.912000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179572.912000] PCI: Probing PCI hardware (bus 00) [17179572.912000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [17179572.912000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 [17179572.912000] Boot video device is 0000:01:00.0 [17179572.920000] PCI: Transparent bridge - 0000:00:14.4 [17179572.920000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179572.944000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17179572.944000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17179572.944000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17179572.944000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17179572.944000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11) [17179572.944000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11) [17179572.944000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11), disabled. [17179572.944000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11) [17179572.944000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [17179572.952000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179572.952000] pnp: PnP ACPI init [17179572.952000] pnp: PnP ACPI: found 13 devices [17179572.952000] PnPBIOS: Disabled by ACPI PNP [17179572.952000] PCI: Using ACPI for IRQ routing [17179572.952000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179572.952000] PCI: Cannot allocate resource region 3 of device 0000:00:00.0 [17179572.952000] pnp: 00:01: ioport range 0x228-0x22f has been reserved [17179572.952000] pnp: 00:01: ioport range 0x40b-0x40b has been reserved [17179572.952000] pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved [17179572.952000] pnp: 00:01: ioport range 0xc00-0xc01 has been reserved [17179572.952000] pnp: 00:01: ioport range 0xc14-0xc14 has been reserved [17179572.952000] pnp: 00:01: ioport range 0xc50-0xc52 has been reserved [17179572.952000] pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved [17179572.952000] pnp: 00:01: ioport range 0xc6f-0xc6f has been reserved [17179572.952000] PCI: Bridge: 0000:00:14.4 [17179572.952000] IO window: e000-efff [17179572.952000] MEM window: fde00000-fdefffff [17179572.952000] PREFETCH window: c8000000-d7ffffff [17179572.952000] NET: Registered protocol family 2 [17179573.016000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [17179573.016000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [17179573.016000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [17179573.016000] TCP: Hash tables configured (established 131072 bind 65536) [17179573.016000] TCP reno registered [17179573.016000] audit: initializing netlink socket (disabled) [17179573.016000] audit(1168020024.016:1): initialized [17179573.016000] highmem bounce pool size: 64 pages [17179573.016000] VFS: Disk quotas dquot_6.5.1 [17179573.016000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179573.016000] Initializing Cryptographic API [17179573.016000] io scheduler noop registered [17179573.016000] io scheduler anticipatory registered [17179573.016000] io scheduler deadline registered [17179573.016000] io scheduler cfq registered (default) [17179573.016000] isapnp: Scanning for PnP cards... [17179573.728000] isapnp: No Plug & Play device found [17179573.760000] Real Time Clock Driver v1.12ac [17179573.760000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [17179573.760000] mice: PS/2 mouse device common for all mice [17179573.760000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179573.760000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179573.760000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179573.760000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [17179574.328000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179574.336000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179574.348000] EISA: Probing bus 0 at eisa.0 [17179574.348000] Cannot allocate resource for EISA slot 4 [17179574.348000] EISA: Detected 0 cards. [17179574.356000] TCP bic registered [17179574.356000] NET: Registered protocol family 1 [17179574.356000] NET: Registered protocol family 8 [17179574.356000] NET: Registered protocol family 20 [17179574.356000] Using IPI No-Shortcut mode [17179574.356000] ACPI: (supports S0 S3 S4 S5) [17179574.356000] Freeing unused kernel memory: 308k freed [17179574.432000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179576.008000] Capability LSM initialized [17179576.264000] ACPI: Processor [CPU0] (supports 8 throttling states) [17179576.264000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707] [17179576.264000] ACPI: Getting cpuindex for acpiid 0x1 [17179577.120000] SCSI subsystem initialized [17179577.128000] libata version 1.20 loaded. [17179577.128000] sata_sil 0000:00:11.0: version 0.9 [17179577.128000] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 177 [17179577.128000] ata1: SATA max UDMA/100 cmd 0xF8830080 ctl 0xF883008A bmdma 0xF8830000 irq 177 [17179577.128000] ata2: SATA max UDMA/100 cmd 0xF88300C0 ctl 0xF88300CA bmdma 0xF8830008 irq 177 [17179577.336000] ata1: SATA link down (SStatus 0) [17179577.360000] scsi0 : sata_sil [17179577.568000] ata2: SATA link down (SStatus 0) [17179577.592000] scsi1 : sata_sil [17179577.592000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 185 [17179577.592000] ata3: SATA max UDMA/100 cmd 0xF8832080 ctl 0xF883208A bmdma 0xF8832000 irq 185 [17179577.592000] ata4: SATA max UDMA/100 cmd 0xF88320C0 ctl 0xF88320CA bmdma 0xF8832008 irq 185 [17179577.800000] ata3: SATA link down (SStatus 0) [17179577.800000] scsi2 : sata_sil [17179578.016000] ata4: SATA link down (SStatus 0) [17179578.016000] scsi3 : sata_sil [17179578.128000] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [17179578.128000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193 [17179578.128000] ATIIXP: chipset revision 0 [17179578.128000] ATIIXP: not 100% native mode: will probe irqs later [17179578.128000] ide0: BM-DMA at 0xf300-0xf307, BIOS settings: hda:pio, hdb:pio [17179578.128000] ide1: BM-DMA at 0xf308-0xf30f, BIOS settings: hdc:pio, hdd:pio [17179578.128000] Probing IDE interface ide0... [17179578.440000] hda: WDC WD2000BB-22GUC0, ATA DISK drive [17179579.120000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179579.160000] Probing IDE interface ide1... [17179579.912000] hdc: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive [17179580.704000] hdd: LITE-ON CD-ROM LTN-489S, ATAPI CD/DVD-ROM drive [17179580.760000] ide1 at 0x170-0x177,0x376 on irq 15 [17179580.776000] hda: max request size: 512KiB [17179580.800000] hda: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63, UDMA(100) [17179580.800000] hda: cache flushes supported [17179580.800000] hda: hda1 hda2 hda3 < hda5 > hda4 [17179580.896000] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [17179580.896000] Uniform CD-ROM driver Revision: 3.20 [17179580.920000] hdd: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33) [17179581.528000] usbcore: registered new driver usbfs [17179581.528000] usbcore: registered new driver hub [17179581.528000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [17179581.528000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 201 [17179581.528000] ohci_hcd 0000:00:13.0: OHCI Host Controller [17179581.536000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [17179581.576000] ohci_hcd 0000:00:13.0: irq 201, io mem 0xfe02d000 [17179581.648000] usb usb1: configuration #1 chosen from 1 choice [17179581.648000] hub 1-0:1.0: USB hub found [17179581.648000] hub 1-0:1.0: 4 ports detected [17179581.688000] ieee1394: Initialized config rom entry `ip1394' [17179581.752000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 201 [17179581.752000] ohci_hcd 0000:00:13.1: OHCI Host Controller [17179581.752000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [17179581.780000] APIC error on CPU0: 00(40) [17179582.344000] APIC error on CPU0: 40(40) [17179582.692000] APIC error on CPU0: 40(40) [17179582.712000] irq 201: nobody cared (try booting with the "irqpoll" option) [17179582.712000] __report_bad_irq+0x24/0x80 note_interrupt+0x9d/0x270 [17179582.712000] usb_hcd_irq+0x24/0x60 [usbcore] handle_IRQ_event+0x33/0x60 [17179582.712000] __do_IRQ+0xf8/0x110 do_IRQ+0x19/0x30 [17179582.712000] common_interrupt+0x1a/0x20 default_idle+0x0/0x60 [17179582.712000] default_idle+0x2a/0x60 cpu_idle+0x42/0xb0 [17179582.712000] start_kernel+0x321/0x3a0 unknown_bootoption+0x0/0x270 [17179582.712000] handlers: [17179582.712000] [] (usb_hcd_irq+0x0/0x60 [usbcore]) [17179582.712000] Disabling IRQ #201 [17179582.712000] ohci_hcd 0000:00:13.1: irq 201, io mem 0xfe02c000 [17179582.776000] usb usb2: configuration #1 chosen from 1 choice [17179582.776000] hub 2-0:1.0: USB hub found [17179582.776000] hub 2-0:1.0: 4 ports detected [17179582.880000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 201 [17179582.880000] ehci_hcd 0000:00:13.2: EHCI Host Controller [17179582.880000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [17179582.880000] ehci_hcd 0000:00:13.2: irq 201, io mem 0xfe02b000 [17179582.880000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179582.880000] usb usb3: configuration #1 chosen from 1 choice [17179582.888000] hub 3-0:1.0: USB hub found [17179582.888000] hub 3-0:1.0: 8 ports detected [17179582.992000] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 21 (level, low) -> IRQ 169 [17179582.992000] PCI: Via IRQ fixup for 0000:01:04.0, from 4 to 9 [17179583.104000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048] IR/IT contexts=[4/8] [17179583.232000] Attempting manual resume [17179583.280000] EXT3-fs: INFO: recovery required on readonly filesystem. [17179583.280000] EXT3-fs: write access will be enabled during recovery. [17179584.416000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000b7288e] [17179593.528000] kjournald starting. Commit interval 5 seconds [17179593.528000] EXT3-fs: recovery complete. [17179593.528000] EXT3-fs: mounted filesystem with ordered data mode. [17179609.008000] Floppy drive(s): fd0 is 1.44M [17179609.064000] FDC 0 is a post-1991 82077 [17179609.296000] Linux agpgart interface v0.101 (c) Dave Jones [17179609.688000] input: PC Speaker as /class/input/input1 [17179610.240000] parport: PnPBIOS parport detected. [17179610.240000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [17179610.280000] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 209 [17179610.408000] 8139too Fast Ethernet driver 0.9.27 [17179610.408000] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 20 (level, low) -> IRQ 217 [17179610.408000] eth0: RealTek RTL8139 at 0xf8a14000, 00:13:d3:54:a2:de, IRQ 217 [17179610.408000] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [17179610.440000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [17179610.864000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [17179610.952000] lp0: using parport0 (interrupt-driven). [17179610.984000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179610.984000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179611.032000] Adding 1052248k swap on /dev/disk/by-uuid/de940856-7947-4f7f-aa4f-ee736b6c66f7. Priority:-1 extents:1 across:1052248k [17179611.192000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 [17179611.256000] ts: Compaq touchscreen protocol output [17179611.472000] EXT3 FS on hda4, internal journal [17179611.728000] NTFS driver 2.1.27 [Flags: R/O MODULE]. [17179611.824000] NTFS volume version 3.1. [17179611.936000] NET: Registered protocol family 17 [17179618.176000] ACPI: Power Button (FF) [PWRF] [17179618.176000] ACPI: Power Button (CM) [PWRB] [17179618.376000] ibm_acpi: ec object not found [17179618.400000] pcc_acpi: loading... [17179618.880000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2) [17179618.912000] powernow-k8: BIOS error - no PSB or ACPI _PSS objects [17179621.248000] NET: Registered protocol family 10 [17179621.248000] lo: Disabled Privacy Extensions [17179621.248000] IPv6 over IPv4 tunneling driver [17179622.712000] [drm] Initialized drm 1.0.1 20051102 [17179622.728000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 217 [17179622.728000] [drm] Initialized radeon 1.25.0 20060524 on minor 0 [17179625.208000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [17179625.208000] apm: overridden by ACPI. [17179625.488000] [drm] Setting GART location based on new memory map [17179625.488000] [drm] Loading R200 Microcode [17179625.488000] [drm] writeback test succeeded in 2 usecs [17179631.672000] eth0: no IPv6 routers present [17179633.152000] [17179633.152000] floppy driver state [17179633.152000] ------------------- [17179633.152000] now=4294908288 last interrupt=4294908072 diff=216 last called handler=f89ea7e0 [17179633.152000] timeout_message=lock fdc [17179633.152000] last output bytes: [17179633.152000] 14 90 4294902266 [17179633.152000] 18 80 4294902266 [17179633.152000] 8 80 4294902266 [17179633.152000] 8 80 4294902266 [17179633.152000] 8 80 4294902266 [17179633.152000] 8 80 4294902266 [17179633.152000] 12 80 4294907550 [17179633.152000] 0 90 4294907550 [17179633.152000] 13 90 4294907550 [17179633.152000] 0 90 4294907550 [17179633.152000] 1a 90 4294907550 [17179633.152000] 0 90 4294907550 [17179633.152000] 3 80 4294907550 [17179633.152000] c1 90 4294907550 [17179633.152000] 10 90 4294907550 [17179633.152000] 7 80 4294907550 [17179633.152000] 0 90 4294907550 [17179633.152000] 8 81 4294908072 [17179633.152000] 7 80 4294908078 [17179633.152000] 0 90 4294908078 [17179633.152000] last result at 4294908072 [17179633.152000] last redo_fd_request at 4294907538 [17179633.152000] 70 0 [17179633.152000] status=81 [17179633.152000] fdc_busy=1 [17179633.152000] do_floppy=f89ea7e0 [17179633.152000] cont=f89f1314 [17179633.152000] current_req=00000000 [17179633.152000] command_status=-1 [17179633.152000] [17179633.152000] floppy0: floppy timeout called [17179634.400000] floppy0: unexpected interrupt [17179634.400000] floppy0: sensei repl[0]=70 repl[1]=0 [17179634.448000] Bluetooth: Core ver 2.8 [17179634.448000] NET: Registered protocol family 31 [17179634.448000] Bluetooth: HCI device and connection manager initialized [17179634.448000] Bluetooth: HCI socket layer initialized [17179634.488000] Bluetooth: L2CAP ver 2.8 [17179634.488000] Bluetooth: L2CAP socket layer initialized [17179634.496000] Bluetooth: RFCOMM socket layer initialized [17179634.496000] Bluetooth: RFCOMM TTY layer initialized [17179634.496000] Bluetooth: RFCOMM ver 1.7 [17179640.576000] usb 3-7: new high speed USB device using ehci_hcd and address 5 [17179641.576000] ehci_hcd 0000:00:13.2: Unlink after no-IRQ? Controller is probably using the wrong IRQ. [17179652.128000] usb 3-7: device not accepting address 5, error -110 [17179695.448000] APIC error on CPU0: 40(40) mike@mike-desktop:~$