Bootdata ok (command line is root=/dev/hdc1 ro console=tty0 quiet splash) Linux version 2.6.10-5-amd64-k8 (buildd@yellow) (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 Thu Mar 24 14:41:52 UTC 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable) BIOS-e820: 000000001ffd0000 - 000000001ffdf000 (ACPI data) BIOS-e820: 000000001ffdf000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) No mptable found. On node 0 totalpages: 131024 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126928 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fb120 ACPI: RSDT (v001 A M I OEMRSDT 0x10000412 MSFT 0x00000097) @ 0x000000001ffd0000 ACPI: FADT (v002 A M I OEMFACP 0x10000412 MSFT 0x00000097) @ 0x000000001ffd0200 ACPI: MADT (v001 A M I OEMAPIC 0x10000412 MSFT 0x00000097) @ 0x000000001ffd0390 ACPI: OEMB (v001 A M I AMI_OEM 0x10000412 MSFT 0x00000097) @ 0x000000001ffdf040 ACPI: DSDT (v001 AH005 AH005001 0x00000001 INTL 0x02002026) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:12 APIC version 16 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Checking aperture... CPU 0: aperture @ e0000000 size 64 MB Built 1 zonelists Kernel command line: root=/dev/hdc1 ro console=tty0 quiet splash Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 1804.129 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 507080k/524096k available (1733k kernel code, 16244k reserved, 995k data, 148k init) Calibrating delay loop... 3571.71 BogoMIPS (lpj=1785856) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 2800+ stepping 00 ACPI: Looking for DSDT in initrd... not found! Using local APIC NMI watchdog using perfctr0 Using local APIC timer interrupts. Detected 12.528 MHz APIC timer. checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. PCI-DMA: Disabling IOMMU. pnp: 00:09: ioport range 0x290-0x297 has been reserved IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1112160822.478:0): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET: Registered protocol family 8 NET: Registered protocol family 20 Restarting tasks...<6> Strange, khubd not stopped Strange, kswapd0 not stopped Strange, kseriod not stopped done ACPI wakeup devices: PS2K PS2M EUSB USB USB2 USB3 MAC AC97 MC97 P0P2 PCI1 PCI2 ACPI: (supports S0 S1 S3 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4208KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 148k freed NET: Registered protocol family 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 1 SIS5513: not 100% native mode: will probe irqs later Probing IDE interface ide0... hda: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... hdc: MAXTOR 6L080L4, ATA DISK drive Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... elevator: using anticipatory as default io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 128KiB hdc: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63 hdc: cache flushes supported /dev/ide/host1/bus0/target0/lun0: p1 p2 < p5 p6 p7 > Stopping tasks: ===| Freeing memory... -\|/done (514 pages freed) Restarting tasks... done VFS: Can't find ext3 filesystem on dev hdc1. VFS: Can't find an ext2 filesystem on dev hdc1. ReiserFS: hdc1: found reiserfs format "3.6" with standard journal ReiserFS: hdc1: using ordered data mode ReiserFS: hdc1: journal params: device hdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc1: checking transaction log (hdc1) ReiserFS: hdc1: Using r5 hash to sort names Adding 979956k swap on /dev/hdc5. Priority:-1 extents:1 SCSI subsystem initialized libata version 1.10 loaded. sis900.c: v1.08.07 11/02/2003 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16 eth0: RealTek RTL8139 at 0xffffff00001e0800, 00:50:fc:80:78:d0, IRQ 16 eth0: Identified 8139 chip type 'RTL-8100B/8139D' hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP] lp0: using parport0 (interrupt-driven). mice: PS/2 mouse device common for all mice input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 Real Time Clock Driver v1.12 nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18 NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 11:43:48 PST 2004 ts: Compaq touchscreen protocol output Capability LSM initialized device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 cdrom: open failed. input: PC Speaker inserting floppy driver for 2.6.10-5-amd64-k8 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 eth0: link up, 10Mbps, half-duplex, lpa 0x0000 ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18 NET: Registered protocol family 17 intel8x0_measure_ac97_clock: measured 50384 usecs intel8x0: clocking to 48000 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller ohci_hcd 0000:00:03.0: irq 20, pci mem 0xfebf4000 ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2) ohci_hcd 0000:00:03.1: irq 21, pci mem 0xfebf5000 ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3) ohci_hcd 0000:00:03.2: irq 22, pci mem 0xfebf6000 ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-2: new full speed USB device using ohci_hcd and address 2 ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller ehci_hcd 0000:00:03.3: irq 23, pci mem 0xfebf7000 ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 PCI: cache line size of 64 is not supported by device 0000:00:03.3 ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 4-0:1.0: USB hub found hub 4-0:1.0: 8 ports detected usb 1-2: USB disconnect, address 2 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) usb 4-8: new high speed USB device using ehci_hcd and address 3 ehci_hcd 0000:00:03.3: port 8 reset error -110 hub 4-0:1.0: hub_port_status failed (err = -32) Linux video capture interface: v1.00 Initializing USB Mass Storage driver... usb 1-2: new full speed USB device using ohci_hcd and address 3 scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning cx2388x v4l2 driver version 0.0.4 loaded ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected] cx88[0]/0: found at 0000:00:0a.0, rev: 5, irq: 17, latency: 64, mmio: 0xfb000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx2388x blackbird driver version 0.0.4 loaded NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff80373ac0(lo) IPv6 over IPv4 tunneling driver Vendor: GENERIC Model: USB Storage-CFC Rev: I19B Type: Direct-Access ANSI SCSI revision: 00 Vendor: GENERIC Model: USB Storage-MSC Rev: I19B Type: Direct-Access ANSI SCSI revision: 00 Vendor: GENERIC Model: USB Storage-SMC Rev: I19B Type: Direct-Access ANSI SCSI revision: 00 Vendor: GENERIC Model: USB Storage-SDC Rev: I19B Type: Direct-Access ANSI SCSI revision: 00 usb-storage: device scan complete Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1 Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2 Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3 ACPI: Power Button (FF) [PWRF] ibm_acpi: ec object not found program hddtemp is using a deprecated SCSI ioctl, please convert it to SG_IO program hddtemp is using a deprecated SCSI ioctl, please convert it to SG_IO program hddtemp is using a deprecated SCSI ioctl, please convert it to SG_IO hddtemp[6952]: segfault at 0000007fc0000000 rip 00000034b4a80140 rsp 0000007fbffff538 error 4 program hddtemp is using a deprecated SCSI ioctl, please convert it to SG_IO program hddtemp is using a deprecated SCSI ioctl, please convert it to SG_IO program hddtemp is using a deprecated SCSI ioctl, please convert it to SG_IO hddtemp[6956]: segfault at 0000007fc0000000 rip 00000034b4a80140 rsp 0000007fbffff538 error 4 program hddtemp is using a deprecated SCSI ioctl, please convert it to SG_IO program hddtemp is using a deprecated SCSI ioctl, please convert it to SG_IO program hddtemp is using a deprecated SCSI ioctl, please convert it to SG_IO hddtemp[6960]: segfault at 0000007fc0000000 rip 00000034b4a80140 rsp 0000007fbffff538 error 4 program hddtemp is using a deprecated SCSI ioctl, please convert it to SG_IO program hddtemp is using a deprecated SCSI ioctl, please convert it to SG_IO program hddtemp is using a deprecated SCSI ioctl, please convert it to SG_IO hddtemp[6964]: segfault at 0000007fc0000000 rip 00000034b4a80140 rsp 0000007fbffff538 error 4 eth0: no IPv6 routers present powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e) powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x2 (1500 mV) cpu_init done, current fid 0xa, vid 0x2 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). nfs warning: mount version older than kernel Losing some ticks... checking if CPU frequency changed.