Question on 20.04 Wired 1 or Wired 2

[Jerry Geis]

On Tue, Oct 11, 2022 at 11:03 AM Jerry Geis <jerry.geis at gmail.com> wrote:

> I am getting this from nmcli
>
> eno1: connected to Wired connection 2
>         "Realtek RTL8111/8168/8411"
>         ethernet (r8169), 88:AE:DD:03:5D:E3, hw, mtu 1500
>         ip4 default
>         inet4 10.20.102.107/16
>         route4 0.0.0.0/0
>         route4 10.20.0.0/16
>         inet6 fe80::7f58:f34f:afe5:aa66/64
>         route6 fe80::/64
>
>
> Notice the Wired Connection 2....    I would expect Wired Connection 1.
> There is only 1 ethernet in this device.
>
>  dmesg | grep eth
> [    1.539609] r8169 0000:02:00.0 eth0: RTL8168h/8111h, 88:ae:dd:03:5d:e3,
> XID 541, IRQ 127
> [    1.539618] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194
> bytes, tx checksumming: ko]
> [    1.543942] r8169 0000:02:00.0 eno1: renamed from eth0
>
> lspci  | grep Ether
> 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
>
> Thanks
>
> Jerry
>


I did notice this also:
more Wired\ connection\ 1.nmconnection

[connection]
id=Wired connection 1
uuid=76a12d19-49fe-3a2d-90fb-c6955d3f98d3
type=ethernet
autoconnect-priority=-999
interface-name=ens3
permissions=
timestamp=1658856143


notice its ens3 not en01

How did that change ?

Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-users/attachments/20221011/aa90c785/attachment.html>