HP ENVY 6052e Printer as a SCANNER Question

[Jay Ridgley]

On 9/30/21 6:44 PM, Jay Ridgley wrote:
> On 9/30/21 2:36 PM, Zahid Rahman wrote:
>> This email was blocked because it was too large.
>>
>> On Thu, 30 Sep 2021, 16:40 Zahid Rahman, <zahidr1000 at gmail.com 
>> <mailto:zahidr1000 at gmail.com>> wrote:
>>
>>     When I try to install  using the HP  Device Manager
>>     --> Network /Ethernet /Wireless network
>>
>>     I get a pop up  with the message below ,  furthermore
>>     http://hplipopensource.com/node/374
>>     <http://hplipopensource.com/node/374> --> that link gives 404.
>>
>>     HPLIP cannot detect printers in your network.
>>
>>     This may be due to existing firewall settings blocking the required
>>     ports. When you are in a trusted network environment, you may open
>>     the ports for network services like mdns and slp in the firewall.
>>     For detailed steps follow the link.
>>     http://hplipopensource.com/node/374
>>     <http://hplipopensource.com/node/374>
>>
>>
>>
>>
>>     hp-uiscan
>>     "No device connected"
>>
> -- SNIP--
> 
> This is the latest I have...
> 
> The device is found and gets connected, however, the device fails on 
> open. I am including the debug trace for reference. Still searching...
> 
> jay at polar:~$ simple-scan -d
> [+0.00s] DEBUG: simple-scan.vala:1720: Starting simple-scan 3.36.3, 
> PID=6783
> [+0.00s] DEBUG: unsetenv() is not thread-safe and should not be used 
> after threads are created
> [+0.04s] DEBUG: _g_io_module_get_default: Found default implementation 
> dconf (DConfSettingsBackend) for ‘gsettings-backend’
> [+0.31s] DEBUG: app-window.vala:1906: Loading state from 
> /home/jay/.cache/simple-scan/state
> [+0.33s] DEBUG: app-window.vala:1885: Restoring window to 600x400 pixels
> [+0.49s] DEBUG: scanner.vala:1539: sane_init () -> SANE_STATUS_GOOD
> [+0.49s] DEBUG: scanner.vala:1545: SANE version 1.0.29
> [+0.49s] DEBUG: scanner.vala:1606: Requesting redetection of scan devices
> [+0.49s] DEBUG: scanner.vala:828: Processing request
> [+0.77s] DEBUG: app-window.vala:1981: Saving state to 
> /home/jay/.cache/simple-scan/state
> [+0.95s] DEBUG: app-window.vala:1981: Saving state to 
> /home/jay/.cache/simple-scan/state
> [+9.48s] DEBUG: scanner.vala:341: sane_get_devices () -> SANE_STATUS_GOOD
> [+9.48s] DEBUG: scanner.vala:353: Device: 
> name="hpaio:/usb/ENVY_6000_series?serial=TH12OBK1BM" 
> vendor="Hewlett-Packard" model="ENVY_6000_series" type="all-in-one"
> [+9.48s] DEBUG: scanner.vala:353: Device: 
> name="escl:http://127.0.0.1:60000" vendor="ESCL" model="ENVY 6000 series 
> [TH12OBK1BM]" type="flatbed scanner"
> [+9.59s] DEBUG: app-window.vala:1981: Saving state to 
> /home/jay/.cache/simple-scan/state
> [+17.64s] DEBUG: simple-scan.vala:1536: Requesting scan at 300 dpi from 
> device 'hpaio:/usb/ENVY_6000_series?serial=TH12OBK1BM'
> [+17.64s] DEBUG: scanner.vala:1674: Scanner.scan 
> ("hpaio:/usb/ENVY_6000_series?serial=TH12OBK1BM", dpi=300, 
> scan_mode=ScanMode.COLOR, depth=8, type=single, paper_width=0, 
> paper_height=0, brightness=0, contrast=0, delay=3000ms)
> [+17.64s] DEBUG: scanner.vala:828: Processing request
> [+17.76s] DEBUG: scanner.vala:889: sane_open 
> ("hpaio:/usb/ENVY_6000_series?serial=TH12OBK1BM") -> SANE_STATUS_IO_ERROR
> [+17.76s] WARNING: scanner.vala:893: Unable to open device: Error during 
> device I/O
> [+17.84s] DEBUG: app-window.vala:1981: Saving state to 
> /home/jay/.cache/simple-scan/state
> [+17.97s] DEBUG: app-window.vala:1981: Saving state to 
> /home/jay/.cache/simple-scan/state
> [+49.29s] DEBUG: app-window.vala:1981: Saving state to 
> /home/jay/.cache/simple-scan/state
> [+53.33s] DEBUG: app-window.vala:1981: Saving state to 
> /home/jay/.cache/simple-scan/state
> [+53.41s] DEBUG: autosave-manager.vala:201: Deleting autosave records
> [+53.41s] DEBUG: scanner.vala:1702: Stopping scan thread
> [+53.41s] DEBUG: scanner.vala:828: Processing request
> [+54.45s] DEBUG: scanner.vala:1713: sane_exit ()
> jay at polar:~$
> 
> 
> 
I found an entry that provided a solution to error: SANE: Error during 
device I/O (code=9) by installing the hplip-plugin.

My question is how can I download hplip-3.20.5-plugin so I may install it?

Thanks,
Jay

-- 
Jay Ridgley
jridgley2 at austin.rr.com
Registered Linux User ID - 9115
https://linuxcounter.net/cert/9115.png
Registered Ubuntu User ID - 23320