System Update froze - UbuntuMATE 16-04
Bret Busby
bret.busby at gmail.com
Fri Jun 22 23:34:59 UTC 2018
I have just tried to send a message, and, it appears to have vapourised.
I had copied as much as possible, of the home directory, to a USB
thumb drive. Some files did not copy.
Then, I unplugged the HP external HDD, and, restarted the software
update/ipgrade, which completed.
I then restarted the computer, as required, and, plugged the HP HDD
in, before the computer booted.
The HDD mounted and is accessible without any problems.
I then ran dmesg, and saw no mention of the HP external HDD.
I then ran tail -30 /var/log/syslog, to find whether any probles with
the HP external HDD were showing.
Below, is the output, which shows that tail -30, appears to not limit
the output to the last 30 lines.
"
[ 0.859045] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.860373] Linux agpgart interface v0.103
[ 0.862238] loop: module loaded
[ 0.862370] ata_piix 0000:00:1f.2: version 2.13
[ 0.862448] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.017031] scsi host0: ata_piix
[ 1.017362] scsi host1: ata_piix
[ 1.017448] ata1: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
[ 1.017455] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
[ 1.017539] libphy: Fixed MDIO Bus: probed
[ 1.017542] tun: Universal TUN/TAP device driver, 1.6
[ 1.017543] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 1.017618] PPP generic driver version 2.4.2
[ 1.017726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.017734] ehci-pci: EHCI PCI platform driver
[ 1.017853] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.017860] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 1.017871] ehci-pci 0000:00:1a.0: debug port 2
[ 1.021829] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[ 1.021840] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf9ffc000
[ 1.032009] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.032084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.032089] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.032093] usb usb1: Product: EHCI Host Controller
[ 1.032096] usb usb1: Manufacturer: Linux 4.4.0-128-generic ehci_hcd
[ 1.032100] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.032268] hub 1-0:1.0: USB hub found
[ 1.032279] hub 1-0:1.0: 2 ports detected
[ 1.032460] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.032466] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 1.032476] ehci-pci 0000:00:1d.0: debug port 2
[ 1.036415] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[ 1.036425] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf9ff6000
[ 1.048017] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.048125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.048128] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.048130] usb usb2: Product: EHCI Host Controller
[ 1.048132] usb usb2: Manufacturer: Linux 4.4.0-128-generic ehci_hcd
[ 1.048133] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.048284] hub 2-0:1.0: USB hub found
[ 1.048294] hub 2-0:1.0: 2 ports detected
[ 1.048399] ehci-platform: EHCI generic platform driver
[ 1.048408] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.048413] ohci-pci: OHCI PCI platform driver
[ 1.048423] ohci-platform: OHCI generic platform driver
[ 1.048430] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.048478] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.049009] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.049020] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.049208] mousedev: PS/2 mouse device common for all mice
[ 1.049439] rtc_cmos 00:01: RTC can wake from S4
[ 1.049584] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.049607] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes
nvram, hpet irqs
[ 1.049615] i2c /dev entries driver
[ 1.049660] device-mapper: uevent: version 1.0.3
[ 1.049724] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28)
initialised: dm-devel at redhat.com
[ 1.049743] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.050203] NET: Registered protocol family 10
[ 1.050383] NET: Registered protocol family 17
[ 1.050394] Key type dns_resolver registered
[ 1.050588] microcode: CPU0 sig=0x20652, pf=0x2, revision=0xe
[ 1.050593] microcode: CPU1 sig=0x20652, pf=0x2, revision=0xe
[ 1.050603] microcode: CPU2 sig=0x20652, pf=0x2, revision=0xe
[ 1.050610] microcode: CPU3 sig=0x20652, pf=0x2, revision=0xe
[ 1.050673] microcode: Microcode Update Driver: v2.01
<tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 1.050851] registered taskstats version 1
[ 1.050868] Loading compiled-in X.509 certificates
[ 1.051729] Loaded X.509 cert 'Build time autogenerated kernel key:
fc7b57a7df019f2655f66a8a374d74ee8f4999fc'
[ 1.051753] zswap: loaded using pool lzo/zbud
[ 1.053800] Key type trusted registered
[ 1.057293] Key type encrypted registered
[ 1.057301] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.057306] ima: No TPM chip found, activating TPM-bypass!
[ 1.057329] evm: HMAC attrs: 0x1
[ 1.057564] Magic number: 6:122:705
[ 1.057686] rtc_cmos 00:01: setting system clock to 2018-06-22
22:39:52 UTC (1529707192)
[ 1.058565] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.058567] EDD information not available.
[ 1.058618] PM: Hibernation image not present or could not be loaded.
[ 1.343994] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.359977] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.476412] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.476418] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.476831] hub 1-1:1.0: USB hub found
[ 1.477060] hub 1-1:1.0: 6 ports detected
[ 1.492430] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.492436] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.492840] hub 2-1:1.0: USB hub found
[ 1.493070] hub 2-1:1.0: 8 ports detected
[ 1.747942] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[ 1.763945] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
[ 1.811991] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.812007] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.812019] ata2.01: link offline, clearing class 3 to NONE
[ 1.812156] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.812166] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.820208] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GH50N, B103, max UDMA/100
[ 1.820387] ata1.00: ATA-8: WDC WD6400AAKS-75A7B2, 01.03B01, max UDMA/133
[ 1.820393] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.828455] ata1.00: configured for UDMA/133
[ 1.828880] scsi 0:0:0:0: Direct-Access ATA WDC
WD6400AAKS-7 3B01 PQ: 0 ANSI: 5
[ 1.829340] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.829446] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks:
(640 GB/596 GiB)
[ 1.829722] sd 0:0:0:0: [sda] Write Protect is off
[ 1.829729] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.829879] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.836104] ata2.00: configured for UDMA/100
[ 1.846276] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GH50N
B103 PQ: 0 ANSI: 5
[ 1.851946] tsc: Refined TSC clocksource calibration: 2925.981 MHz
[ 1.851953] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x2a2d228446b, max_idle_ns: 440795275274 ns
[ 1.858652] usb 2-1.2: New USB device found, idVendor=058f, idProduct=6362
[ 1.858659] usb 2-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.858664] usb 2-1.2: Product: Mass Storage Device
[ 1.858668] usb 2-1.2: Manufacturer: Generic
[ 1.858673] usb 2-1.2: SerialNumber: 058F63626420
[ 1.859332] usb 1-1.1: New USB device found, idVendor=04d9, idProduct=1503
[ 1.859335] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.859342] usb 1-1.1: Product: USB Keyboard
[ 1.859346] usb 1-1.1: Manufacturer:
[ 1.868684] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer
dvd-ram cd/rw xa/form2 cdda tray
[ 1.868690] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.868948] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.869048] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.927925] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[ 1.931890] usb 1-1.3: new low-speed USB device number 4 using ehci-pci
[ 2.016250] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9
sda10 sda11 sda12 sda13 sda14 >
[ 2.018642] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.020111] Freeing unused kernel memory: 1512K
[ 2.021218] usb 2-1.4: New USB device found, idVendor=03f0, idProduct=4507
[ 2.021225] usb 2-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.021230] usb 2-1.4: Product: External HDD
[ 2.021234] usb 2-1.4: Manufacturer: HP
[ 2.021238] usb 2-1.4: SerialNumber: 57584C314534305032353738
[ 2.030014] usb 1-1.3: New USB device found, idVendor=0665, idProduct=5161
[ 2.030020] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.030024] usb 1-1.3: Product: USB to Serial
[ 2.030027] usb 1-1.3: Manufacturer: INNO TECH
[ 2.031885] Write protecting the kernel read-only data: 14336k
[ 2.032543] Freeing unused kernel memory: 1688K
[ 2.032886] Freeing unused kernel memory: 96K
[ 2.046515] random: systemd-udevd: uninitialized urandom read (16
bytes read, 17 bits of entropy available)
[ 2.046613] random: systemd-udevd: uninitialized urandom read (16
bytes read, 17 bits of entropy available)
[ 2.046628] random: systemd-udevd: uninitialized urandom read (16
bytes read, 17 bits of entropy available)
[ 2.047013] random: udevadm: uninitialized urandom read (16 bytes
read, 18 bits of entropy available)
[ 2.047039] random: udevadm: uninitialized urandom read (16 bytes
read, 18 bits of entropy available)
[ 2.054387] random: systemd-udevd: uninitialized urandom read (16
bytes read, 20 bits of entropy available)
[ 2.054477] random: systemd-udevd: uninitialized urandom read (16
bytes read, 20 bits of entropy available)
[ 2.054489] random: systemd-udevd: uninitialized urandom read (16
bytes read, 20 bits of entropy available)
[ 2.054768] random: systemd-udevd: uninitialized urandom read (16
bytes read, 20 bits of entropy available)
[ 2.054792] random: systemd-udevd: uninitialized urandom read (16
bytes read, 20 bits of entropy available)
[ 2.101597] FUJITSU Extended Socket Network Device Driver - version
1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 2.107849] usb 1-1.4: new low-speed USB device number 5 using ehci-pci
[ 2.113309] pps_core: LinuxPPS API ver. 1 registered
[ 2.113312] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti at linux.it>
[ 2.115127] PTP clock support registered
[ 2.117346] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[ 2.121947] [drm] Initialized drm 1.1.0 20060810
[ 2.123265] scsi host2: usb-storage 2-1.2:1.0
[ 2.123352] usb-storage 2-1.4:1.0: USB Mass Storage device detected
[ 2.123417] scsi host3: usb-storage 2-1.4:1.0
[ 2.123498] usbcore: registered new interface driver usb-storage
[ 2.124866] usbcore: registered new interface driver uas
[ 2.124874] tg3.c:v3.137 (May 11, 2014)
[ 2.131800] libphy: tg3 mdio bus: probed
[ 2.141223] wmi: Mapper loaded
[ 2.163280] checking generic (cf000000 130000) vs hw (d0000000 10000000)
[ 2.163283] checking generic (cf000000 130000) vs hw (ce000000 2000000)
[ 2.163284] fb: switching to nouveaufb from VESA VGA
[ 2.163312] Console: switching to colour dummy device 80x25
[ 2.163463] nouveau 0000:01:00.0: NVIDIA GT218 (0a8300a2)
[ 2.210935] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57788) rev
57780001] (PCI Express) MAC address 84:2b:2b:97:39:fe
[ 2.210940] tg3 0000:03:00.0 eth0: attached PHY driver [Broadcom
BCM57780] (mii_bus:phy_addr=300:01)
[ 2.210943] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0]
MIirq[0] ASF[0] TSOcap[1]
[ 2.210946] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.212777] tg3 0000:03:00.0 enp3s0: renamed from eth0
[ 2.283556] nouveau 0000:01:00.0: bios: version 70.18.35.00.11
[ 2.300038] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c077
[ 2.300041] usb 1-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.300043] usb 1-1.4: Product: USB Optical Mouse
[ 2.300046] usb 1-1.4: Manufacturer: Logitech
[ 2.304663] nouveau 0000:01:00.0: fb: 512 MiB DDR3
[ 2.307430] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.336509] usbcore: registered new interface driver usbhid
[ 2.336512] usbhid: USB HID core driver
[ 2.340860] input: USB Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:04D9:1503.0001/input/input5
[ 2.395919] hid-generic 0003:04D9:1503.0001: input,hidraw0: USB HID
v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1a.0-1.1/input0
[ 2.398182] input: USB Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:04D9:1503.0002/input/input6
[ 2.451951] hid-generic 0003:04D9:1503.0002: input,hidraw1: USB HID
v1.10 Device [ USB Keyboard] on usb-0000:00:1a.0-1.1/input1
[ 2.452421] hid-generic 0003:0665:5161.0003: hiddev0,hidraw2: USB
HID v1.00 Device [INNO TECH USB to Serial] on
usb-0000:00:1a.0-1.3/input0
[ 2.452544] input: Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C077.0004/input/input7
[ 2.452687] hid-generic 0003:046D:C077.0004: input,hidraw3: USB HID
v1.11 Mouse [Logitech USB Optical Mouse] on
usb-0000:00:1a.0-1.4/input0
[ 2.864895] clocksource: Switched to clocksource tsc
[ 3.120583] scsi 2:0:0:0: Direct-Access Generic- SD/MMC
1.00 PQ: 0 ANSI: 0
[ 3.120705] scsi 3:0:0:0: Direct-Access HP External HDD
2002 PQ: 0 ANSI: 4
[ 3.121199] scsi 2:0:0:1: Direct-Access Generic- Compact Flash
1.01 PQ: 0 ANSI: 0
[ 3.121449] scsi 3:0:0:1: CD-ROM HP Virtual CD
4507 2002 PQ: 0 ANSI: 4
[ 3.121698] scsi 2:0:0:2: Direct-Access Generic- SM/xD Picture
1.02 PQ: 0 ANSI: 0
[ 3.122326] scsi 2:0:0:3: Direct-Access Generic- MS/MS-Pro
1.03 PQ: 0 ANSI: 0
[ 3.122736] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.123090] sd 2:0:0:1: Attached scsi generic sg3 type 0
[ 3.123396] sd 2:0:0:2: Attached scsi generic sg4 type 0
[ 3.123633] sd 2:0:0:3: Attached scsi generic sg5 type 0
[ 3.125644] sd 3:0:0:0: Attached scsi generic sg6 type 0
[ 3.127076] sd 3:0:0:0: [sdf] 975400960 512-byte logical blocks:
(499 GB/465 GiB)
[ 3.128698] sr 3:0:0:1: [sr1] scsi3-mmc drive: 51x/51x caddy
[ 3.128810] sr 3:0:0:1: Attached scsi CD-ROM sr1
[ 3.128881] sr 3:0:0:1: Attached scsi generic sg7 type 5
[ 3.130568] sd 3:0:0:0: [sdf] Write Protect is off
[ 3.130572] sd 3:0:0:0: [sdf] Mode Sense: 23 00 10 00
[ 3.131321] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 3.131945] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 3.133191] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 3.133320] sd 3:0:0:0: [sdf] No Caching mode page found
[ 3.133323] sd 3:0:0:0: [sdf] Assuming drive cache: write through
[ 3.134445] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 3.530226] random: nonblocking pool is initialized
[ 4.448630] [TTM] Zone kernel: Available graphics memory: 8146066 kiB
[ 4.448636] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 4.448639] [TTM] Initializing pool allocator
[ 4.448649] [TTM] Initializing DMA pool allocator
[ 4.448673] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[ 4.448675] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 4.448680] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 4.448682] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 4.448685] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[ 4.448687] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[ 4.448689] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010
[ 4.448691] nouveau 0000:01:00.0: DRM: DCB outp 03: 01022310 00000000
[ 4.448693] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[ 4.448695] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[ 4.448697] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[ 4.462177] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.462179] [drm] Driver supports precise vblank timestamp query.
[ 4.488434] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 4.561876] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb:
0x70000, bo ffff88042376f000
[ 4.562000] fbcon: nouveaufb (fb0) is primary device
[ 4.562069] Console: switching to colour frame buffer device 160x64
[ 4.562104] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 4.575618] [drm] Initialized nouveau 1.3.1 20120801 for
0000:01:00.0 on minor 0
[ 5.000833] sdf: sdf1
[ 5.008964] sd 3:0:0:0: [sdf] Attached SCSI disk
[ 14.692578] EXT4-fs (sda5): mounting ext3 file system using the
ext4 subsystem
[ 14.704007] EXT4-fs (sda5): mounted filesystem with ordered data
mode. Opts: (null)
[ 15.922861] systemd[1]: systemd 229 running in system mode. (+PAM
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 15.923026] systemd[1]: Detected architecture x86-64.
[ 15.929373] systemd[1]: Set hostname to <bret-Inspiron-580-UbuntuMATE>.
[ 17.915826] systemd[1]: Created slice User and Session Slice.
[ 17.915920] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 17.915965] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 17.916005] systemd[1]: Listening on udev Kernel Socket.
[ 17.916082] systemd[1]: Created slice System Slice.
[ 17.916137] systemd[1]: Listening on udev Control Socket.
[ 17.916166] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 17.916204] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 17.916238] systemd[1]: Listening on Syslog Socket.
[ 17.916250] systemd[1]: Reached target Slices.
[ 17.916288] systemd[1]: Listening on Journal Socket (/dev/log).
[ 17.916300] systemd[1]: Reached target User and Group Name Lookups.
[ 17.916446] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 17.916461] systemd[1]: Reached target Encrypted Volumes.
[ 17.916535] systemd[1]: Listening on Journal Audit Socket.
[ 17.916615] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 17.916627] systemd[1]: Reached target Remote File Systems (Pre).
[ 17.916636] systemd[1]: Reached target Remote File Systems.
[ 17.916687] systemd[1]: Listening on Journal Socket.
[ 17.946632] systemd[1]: Starting Load Kernel Modules...
[ 17.947144] systemd[1]: Starting Set console keymap...
[ 17.947740] systemd[1]: Started Braille Device Support.
[ 17.948346] systemd[1]: Starting LSB: controls configuration of
serial ports...
[ 17.948808] systemd[1]: Starting Uncomplicated firewall...
[ 17.949318] systemd[1]: Starting Journal Service...
[ 18.106510] systemd[1]: Mounting POSIX Message Queue File System...
[ 18.107073] systemd[1]: Starting Create list of required static
device nodes for the current kernel...
[ 18.107695] systemd[1]: Mounting Huge Pages File System...
[ 18.108190] systemd[1]: Started Read required files in advance.
[ 18.108759] systemd[1]: Mounting Debug File System...
[ 18.426970] systemd[1]: Started Create list of required static
device nodes for the current kernel.
[ 18.438686] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 19.104319] systemd[1]: Mounted POSIX Message Queue File System.
[ 19.104374] systemd[1]: Mounted Huge Pages File System.
[ 19.105013] systemd[1]: Mounted Debug File System.
[ 19.128409] lp: driver loaded but no devices found
[ 19.225376] ppdev: user-space parallel port driver
[ 19.336990] systemd[1]: Started Journal Service.
[ 19.805445] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.951411] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 20.277324] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 21.423823] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 21.596959] systemd-journald[240]: Received request to flush
runtime journal from PID 1
[ 21.954384] ACPI Warning: SystemIO range
0x0000000000000828-0x000000000000082F conflicts with OpRegion
0x0000000000000800-0x000000000000084F (\PMRG) (20150930/utaddress-254)
[ 21.954391] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 21.954417] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 22.182939] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.708597] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work
properly. Using workaround
[ 23.353242] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 23.353251] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 23.524234] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 23.605602] snd_hda_codec_realtek hdaudioC0D0: autoconfig for
ALC887: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 23.605606] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 23.605609] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x1b/0x0/0x0/0x0/0x0)
[ 23.605611] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 23.605612] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 23.605615] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 23.605617] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 23.605619] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 23.692156] input: HDA Intel MID Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 23.692244] input: HDA Intel MID Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 23.692323] input: HDA Intel MID Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 23.692400] input: HDA Intel MID Line Out Front as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 23.692479] input: HDA Intel MID Line Out Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 23.692556] input: HDA Intel MID Line Out CLFE as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 23.692636] input: HDA Intel MID Line Out Side as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 23.692715] input: HDA Intel MID Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 23.692793] input: HDA Intel MID HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 24.135017] gpio_ich: GPIO from 436 to 511 on gpio_ich
[ 24.162583] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 24.162658] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 24.162721] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 24.162782] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 29.401286] Adding 42860344k swap on /dev/sda7. Priority:-1
extents:1 across:42860344k FS
[ 30.457956] EXT4-fs (sda13): mounting ext3 file system using the
ext4 subsystem
[ 30.582544] EXT4-fs (sda13): mounted filesystem with ordered data
mode. Opts: (null)
[ 33.878350] audit: type=1400 audit(1529707225.319:2):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/bin/freshclam" pid=930 comm="apparmor_parser"
[ 33.932985] audit: type=1400 audit(1529707225.375:3):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/sbin/dhclient" pid=927 comm="apparmor_parser"
[ 33.932993] audit: type=1400 audit(1529707225.375:4):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=927
comm="apparmor_parser"
[ 33.932998] audit: type=1400 audit(1529707225.375:5):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=927
comm="apparmor_parser"
[ 33.933002] audit: type=1400 audit(1529707225.375:6):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=927
comm="apparmor_parser"
[ 34.094111] audit: type=1400 audit(1529707225.535:7):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/lightdm/lightdm-guest-session" pid=926
comm="apparmor_parser"
[ 34.094121] audit: type=1400 audit(1529707225.535:8):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=926
comm="apparmor_parser"
[ 34.335147] audit: type=1400 audit(1529707225.775:9):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/sbin/cups-browsed" pid=935 comm="apparmor_parser"
[ 34.418611] audit: type=1400 audit(1529707225.859:10):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/telepathy/mission-control-5" pid=934
comm="apparmor_parser"
[ 34.418623] audit: type=1400 audit(1529707225.859:11):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/telepathy/telepathy-*" pid=934 comm="apparmor_parser"
[ 41.000613] cgroup: new mount options do not match the existing
superblock, will be ignored
[ 48.045727] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 48.068977] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 48.204749] tg3 0000:03:00.0 enp3s0: Link is down
[ 48.804165] audit_printk_skb: 144 callbacks suppressed
[ 48.804168] audit: type=1400 audit(1529707240.247:60):
apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld"
name="/proc/1314/status" pid=1314 comm="mysqld" requested_mask="r"
denied_mask="r" fsuid=125 ouid=125
[ 48.804203] audit: type=1400 audit(1529707240.247:61):
apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld"
name="/sys/devices/system/node/" pid=1314 comm="mysqld"
requested_mask="r" denied_mask="r" fsuid=125 ouid=0
[ 48.804253] audit: type=1400 audit(1529707240.247:62):
apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld"
name="/proc/1314/status" pid=1314 comm="mysqld" requested_mask="r"
denied_mask="r" fsuid=125 ouid=125
[ 52.204388] tg3 0000:03:00.0 enp3s0: Link is up at 1000 Mbps, full duplex
[ 52.204393] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX
[ 52.204407] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 64.777458] Non-volatile memory driver v1.3
[ 96.748471] sd 3:0:0:0: [sdf] tag#0 FAILED Result:
hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 96.748476] sd 3:0:0:0: [sdf] tag#0 Sense Key : Hardware Error
[current] [descriptor]
[ 96.748478] sd 3:0:0:0: [sdf] tag#0 Add. Sense: No additional sense
information
[ 96.748482] sd 3:0:0:0: [sdf] tag#0 CDB: ATA command pass
through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 99.795865] sd 3:0:0:0: [sdf] tag#0 FAILED Result:
hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 99.795876] sd 3:0:0:0: [sdf] tag#0 Sense Key : Hardware Error
[current] [descriptor]
[ 99.795882] sd 3:0:0:0: [sdf] tag#0 Add. Sense: No additional sense
information
[ 99.795890] sd 3:0:0:0: [sdf] tag#0 CDB: ATA command pass
through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[ 105.247396] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 105.922687] nf_conntrack: automatic helper assignment is deprecated
and it will be removed soon. Use the iptables CT target to attach
helpers instead.
[ 107.206303] ISO 9660 Extensions: RRIP_1991A
[ 107.206319] ISOFS: primary root directory is empty. Disabling Rock
Ridge and switching to Joliet.
[ 107.206322] ISOFS: changing to secondary root
[ 149.101945] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:fb:34:12:98:75:9d:41:08:00 SRC=192.168.0.2
DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=10029 PROTO=2
[ 177.706308] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 252.027917] EXT4-fs (sda9): mounting ext3 file system using the
ext4 subsystem
[ 252.059588] EXT4-fs (sda9): warning: maximal mount count reached,
running e2fsck is recommended
[ 252.070201] EXT4-fs (sda9): mounted filesystem with ordered data
mode. Opts: (null)
[ 261.548650] EXT4-fs (sda10): mounting ext3 file system using the
ext4 subsystem
[ 261.578688] EXT4-fs (sda10): warning: maximal mount count reached,
running e2fsck is recommended
[ 261.591158] EXT4-fs (sda10): mounted filesystem with ordered data
mode. Opts: (null)
[ 270.074597] EXT4-fs (sda12): mounting ext3 file system using the
ext4 subsystem
[ 270.103367] EXT4-fs (sda12): warning: maximal mount count reached,
running e2fsck is recommended
[ 270.116847] EXT4-fs (sda12): mounted filesystem with ordered data
mode. Opts: (null)
[ 280.485611] EXT4-fs (sda14): mounted filesystem with ordered data
mode. Opts: (null)
[ 287.173080] EXT4-fs (sda6): mounting ext3 file system using the
ext4 subsystem
[ 287.206671] EXT4-fs (sda6): mounted filesystem with ordered data
mode. Opts: (null)
[ 299.548811] EXT4-fs (sda8): mounting ext3 file system using the
ext4 subsystem
[ 299.580645] EXT4-fs (sda8): warning: checktime reached, running
e2fsck is recommended
[ 299.591039] EXT4-fs (sda8): mounted filesystem with ordered data
mode. Opts: (null)
[ 302.689781] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 427.673771] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 552.656157] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 561.195862] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:fb:34:12:98:75:9d:41:08:00 SRC=192.168.0.2
DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=36180 PROTO=2
[ 677.639149] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 696.354375] sd 3:0:0:0: [sdf] tag#0 FAILED Result:
hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 696.354381] sd 3:0:0:0: [sdf] tag#0 Sense Key : Hardware Error
[current] [descriptor]
[ 696.354384] sd 3:0:0:0: [sdf] tag#0 Add. Sense: No additional sense
information
[ 696.354387] sd 3:0:0:0: [sdf] tag#0 CDB: ATA command pass
through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 699.902764] sd 3:0:0:0: [sdf] tag#0 FAILED Result:
hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 699.902770] sd 3:0:0:0: [sdf] tag#0 Sense Key : Hardware Error
[current] [descriptor]
[ 699.902772] sd 3:0:0:0: [sdf] tag#0 Add. Sense: No additional sense
information
[ 699.902776] sd 3:0:0:0: [sdf] tag#0 CDB: ATA command pass
through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[ 704.860205] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:fb:34:12:98:75:9d:41:08:00 SRC=192.168.0.2
DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=17360 PROTO=2
[ 802.621912] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 927.603934] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 967.158490] sd 3:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 967.158500] sd 3:0:0:0: [sdf] tag#0 Sense Key : Medium Error [current]
[ 967.158506] sd 3:0:0:0: [sdf] tag#0 Add. Sense: Unrecovered read error
[ 967.158513] sd 3:0:0:0: [sdf] tag#0 CDB: Read(10) 28 00 08 5a 76 e8
00 00 f0 00
[ 967.158518] blk_update_request: critical medium error, dev sdf,
sector 140146408
[ 1052.587842] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1177.569955] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1197.903695] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:fb:34:12:98:75:9d:41:08:00 SRC=192.168.0.2
DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=33773 PROTO=2
[ 1202.908461] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:fb:34:12:98:75:9d:41:08:00 SRC=192.168.0.2
DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=50198 PROTO=2
[ 1296.182176] sd 3:0:0:0: [sdf] tag#0 FAILED Result:
hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 1296.182186] sd 3:0:0:0: [sdf] tag#0 Sense Key : Hardware Error
[current] [descriptor]
[ 1296.182192] sd 3:0:0:0: [sdf] tag#0 Add. Sense: No additional sense
information
[ 1296.182199] sd 3:0:0:0: [sdf] tag#0 CDB: ATA command pass
through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 1299.510509] sd 3:0:0:0: [sdf] tag#0 FAILED Result:
hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 1299.510518] sd 3:0:0:0: [sdf] tag#0 Sense Key : Hardware Error
[current] [descriptor]
[ 1299.510523] sd 3:0:0:0: [sdf] tag#0 Add. Sense: No additional sense
information
[ 1299.510529] sd 3:0:0:0: [sdf] tag#0 CDB: ATA command pass
through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[ 1302.551995] [UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
root at bret-Inspiron-580-UbuntuMATE:/home/bret# tail -30 /var/log/syslog
Jun 23 06:54:54 bret-Inspiron-580-UbuntuMATE systemd[1]: Started
Cleanup of Temporary Directories.
Jun 23 06:55:18 bret-Inspiron-580-UbuntuMATE kernel: [ 927.603934]
[UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
Jun 23 06:55:58 bret-Inspiron-580-UbuntuMATE kernel: [ 967.158490] sd
3:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
Jun 23 06:55:58 bret-Inspiron-580-UbuntuMATE kernel: [ 967.158500] sd
3:0:0:0: [sdf] tag#0 Sense Key : Medium Error [current]
Jun 23 06:55:58 bret-Inspiron-580-UbuntuMATE kernel: [ 967.158506] sd
3:0:0:0: [sdf] tag#0 Add. Sense: Unrecovered read error
Jun 23 06:55:58 bret-Inspiron-580-UbuntuMATE kernel: [ 967.158513] sd
3:0:0:0: [sdf] tag#0 CDB: Read(10) 28 00 08 5a 76 e8 00 00 f0 00
Jun 23 06:55:58 bret-Inspiron-580-UbuntuMATE kernel: [ 967.158518]
blk_update_request: critical medium error, dev sdf, sector 140146408
Jun 23 06:56:18 bret-Inspiron-580-UbuntuMATE ntpd[1510]:
129.250.35.250 local addr 192.168.0.7 -> <null>
Jun 23 06:57:23 bret-Inspiron-580-UbuntuMATE kernel: [ 1052.587842]
[UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
Jun 23 06:57:57 bret-Inspiron-580-UbuntuMATE ntpd[1510]: 103.38.120.36
local addr 192.168.0.7 -> <null>
Jun 23 06:58:49 bret-Inspiron-580-UbuntuMATE ntpd[1510]:
129.250.35.251 local addr 192.168.0.7 -> <null>
Jun 23 06:59:28 bret-Inspiron-580-UbuntuMATE kernel: [ 1177.569955]
[UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
Jun 23 06:59:38 bret-Inspiron-580-UbuntuMATE ntpd[1510]:
203.122.222.157 local addr 192.168.0.7 -> <null>
Jun 23 06:59:49 bret-Inspiron-580-UbuntuMATE kernel: [ 1197.903695]
[UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:fb:34:12:98:75:9d:41:08:00 SRC=192.168.0.2
DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=33773 PROTO=2
Jun 23 06:59:54 bret-Inspiron-580-UbuntuMATE kernel: [ 1202.908461]
[UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:fb:34:12:98:75:9d:41:08:00 SRC=192.168.0.2
DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=50198 PROTO=2
Jun 23 07:00:05 bret-Inspiron-580-UbuntuMATE ntpd[1510]:
220.158.215.20 local addr 192.168.0.7 -> <null>
Jun 23 07:00:06 bret-Inspiron-580-UbuntuMATE ntpd[1510]: 45.76.113.31
local addr 192.168.0.7 -> <null>
Jun 23 07:00:09 bret-Inspiron-580-UbuntuMATE ntpd[1510]: 139.99.168.22
local addr 192.168.0.7 -> <null>
Jun 23 07:00:11 bret-Inspiron-580-UbuntuMATE ntpd[1510]:
144.48.166.166 local addr 192.168.0.7 -> <null>
Jun 23 07:00:17 bret-Inspiron-580-UbuntuMATE ntpd[1510]: 13.55.50.68
local addr 192.168.0.7 -> <null>
Jun 23 07:01:27 bret-Inspiron-580-UbuntuMATE kernel: [ 1296.182176] sd
3:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
Jun 23 07:01:27 bret-Inspiron-580-UbuntuMATE kernel: [ 1296.182186] sd
3:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor]
Jun 23 07:01:27 bret-Inspiron-580-UbuntuMATE kernel: [ 1296.182192] sd
3:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information
Jun 23 07:01:27 bret-Inspiron-580-UbuntuMATE kernel: [ 1296.182199] sd
3:0:0:0: [sdf] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00
00 00 00 00 00 00 00 00 00 e5 00
Jun 23 07:01:30 bret-Inspiron-580-UbuntuMATE kernel: [ 1299.510509] sd
3:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR
driverbyte=DRIVER_SENSE
Jun 23 07:01:30 bret-Inspiron-580-UbuntuMATE kernel: [ 1299.510518] sd
3:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor]
Jun 23 07:01:30 bret-Inspiron-580-UbuntuMATE kernel: [ 1299.510523] sd
3:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information
Jun 23 07:01:30 bret-Inspiron-580-UbuntuMATE kernel: [ 1299.510529] sd
3:0:0:0: [sdf] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20
da 00 00 4f c2 00 b0 00 00
Jun 23 07:01:33 bret-Inspiron-580-UbuntuMATE kernel: [ 1302.551995]
[UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:01:f8:ab:05:8e:34:fa:08:00 SRC=192.168.0.1
DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
Jun 23 07:02:29 bret-Inspiron-580-UbuntuMATE kernel: [ 1358.559298]
[UFW BLOCK] IN=enp3s0 OUT=
MAC=01:00:5e:00:00:fb:34:12:98:75:9d:41:08:00 SRC=192.168.0.2
DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=1856 PROTO=2
root at bret-Inspiron-580-UbuntuMATE:/home/bret#
"
I think it shows that no problem is evident, with the HP external HDD.
I think the problem lasy with the file management, due to issues with
data transfer, causing me to previously, as I had mentioned, need to
abort file transfers, on a number of occasions, when they has stopped
progressing.
Copying about 30-40GB of data to the USB thumb drive, took several
hours, with the transfer rates slowing to 2MB/s, and, as low as
hundreds of kB/s.
The USBN thumb drive was brand new, and, unused, and, is rated at 150MB/s.
Even if the transfer rate had sustained at 20MB/s, over an hour
(3600s), it should have been able to transfer about 70MB in an hour.
But, the software does not allow that.
So, I think the problems shown previously, arise from file managemnt
software problems, and, not the HP external HDD.
Of course, I stand to be corrected, if my perception of this is wrong.
Of course, this outcome does not change my concerns and suggestions,
regarding the initramfs bug and its status.
--
Bret Busby
Armadale
West Australia
..............
"So once you do know what the question actually is,
you'll know what the answer means."
- Deep Thought,
Chapter 28 of Book 1 of
"The Hitchhiker's Guide to the Galaxy:
A Trilogy In Four Parts",
written by Douglas Adams,
published by Pan Books, 1992
....................................................
More information about the ubuntu-users
mailing list