Is it possible to create a file allowing to listen to a web radio station via VLC or Clementine?

Bruce Ferrell bferrell at baywinds.org
Wed Jun 15 04:17:28 UTC 2016


On 06/14/2016 08:58 PM, Joel Roth wrote:
> Hi Bas,
>
> Sorry for top-posting, but this is short. I'll suggest
> installing mpv as a work-around. This works:
>
> mpv --playlist=http://www.radioswissjazz.ch/live/mp3.m3u
>
> I used to use VLC for this. Sad.
>
> Joel
>
> Bas G. Roufs wrote:
>> TERMINAL ERROR REPORTS: SEE BELOW.
>>
>> Hello Mike & Everybody.
>>
>> Until recently, I used to listen to some of the Vatican Radio stations by 
>> means of VLC or Clementine at my system - at present Kubuntu Linux 14.04. 
>>
>> The stations I aim at, are still listed here:
>>
>> http://www.listenlive.eu/vatican.html
>>
>> When going to this page, I simply downloaded by example the attached .m3u file: 
>> from one of the stations I wanted to listen to my laptop. Then, I opened the 
>> file via one of those audio players mentioned above. I still did so 
>> successfully just a few weeks ago.
>>
>> However, ever some days, this method does not work any more. From the error 
>> reports below, I get the impression that there is nothing wrong with this m3u 
>> file. However the page that used to be opened by it apparently does not exist 
>> any more - in one of the reports below, you can see a 404 - error. Because of 
>> the same reason, it's not possible any more to download such a .m3u file from 
>> listenlive.eu. 
>>
>> Now, I listen to the same radio stations for the time being via Firefox, via 
>> this page: 
>> http://en.radiovaticana.va/epg-web#!/?cid=167#1
>>
>> My question now: is there a way to create a file allowing me to listen to one 
>> of those web radio stations via VLC or Clementine?
>>
>> If you have any thoughts or ideas, please share it here.
>>
>> Thanks.
>>
>> Yours.
>>
>> Bas G. Roufs.
>> --------------------
>>
>>
>> ERROR REPORT VLC
>> ================
>> bas at Viaconsensus-camino:~$ vlc
>> VLC media player 2.1.6 Rincewind (revision 2.1.6-0-gea01d28)
>> [0x88bc910] main libvlc: Running vlc with the default interface. Use 'cvlc' to 
>> use vlc without interface.
>> Bus::open: Can not get ibus-daemon's address. 
>> IBusInputContext::createInputContext: no connection to ibus-daemon 
>> Object::connect: No such signal 
>> org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
>> Object::connect: No such signal 
>> org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
>> kfilemodule(3455) KSambaSharePrivate::testparmParamValue: We got some errors 
>> while running testparm "Load smb config files from /etc/samba/smb.conf
>> Loaded services file OK.
>> WARNING: The 'netbios name' is too long (max. 15 chars).
>>
>> " 
>> [0x88cc718] main playlist: stopping playback
>> [0x894cd98] access_http access error: error: HTTP/1.0 404 File Not Found
>> [0x894cd98] access_http access error: error: HTTP/1.0 404 File Not Found
>> [0x894cd98] access_mms access error: error: HTTP/1.0 404 File Not Found
>> [0xa9903d88] main input error: open of 
>> `http://sc4.vie.llnw.net:80/stream/vatican_vatican01' failed
>> QtDBus: cannot relay signals from parent QObject(0xab4ad808 "scheduler") 
>> unless they are emitted in the object's thread QThread(0xb0300600 ""). Current 
>> thread is QThread(0x88bca10 "").
>> QtDBus: cannot relay signals from parent QObject(0xab4531c0 "") unless they 
>> are emitted in the object's thread QThread(0xb0300600 ""). Current thread is 
>> QThread(0x88bca10 "").
>> bas at Viaconsensus-camino:~$ 
>>
>>
>>
>> ERROR REPORT CLEMENTINE
>> ========================
>>
>> bas at Viaconsensus-camino:~$ clementine
>> 21:48:27.027 WARN  unknown                          Bus::open: Can not get 
>> ibus-daemon's address.  
>> 21:48:27.032 DEBUG unknown                          
>> IBusInputContext::createInputContext: no connection to ibus-daemon  
>> 21:48:59.487 WARN  unknown                          Object::connect: No such 
>> signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath) 
>> 21:48:59.487 WARN  unknown                          Object::connect: No such 
>> signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath) 
>> 21:49:04.087 DEBUG unknown                          kfilemodule(3945) 
>> KSambaSharePrivate::testparmParamValue: We got some errors while running 
>> testparm "Load smb config files from /etc/samba/smb.conf 
>> 21:49:04.087 DEBUG unknown                          Loaded services file OK. 
>> 21:49:04.087 DEBUG unknown                          WARNING: The 'netbios 
>> name' is too long (max. 15 chars). 
>> 21:49:04.087 DEBUG unknown                           
>> 21:49:04.088 DEBUG unknown                          "  
>> 21:49:09.950 WARN  unknown                          QTimeLine::start: already 
>> running 
>> 21:49:15.034 WARN  unknown                          QTimeLine::start: already 
>> running 
>> 22:17:19.135 WARN  unknown                          QxtGlobalShortcut failed 
>> to unregister: "Media Next"  
>> 22:17:19.135 WARN  unknown                          QxtGlobalShortcut failed 
>> to unregister: "Media Play"  
>> 22:17:19.135 WARN  unknown                          QxtGlobalShortcut failed 
>> to unregister: "Media Previous"  
>> bas at Viaconsensus-camino:~$ 
>>
>>
>>
>> -- 
>>
>>
>> Bas G. Roufs
>> Utrecht, NL, EU.
>> E.: BasRoufs at gmail.com; M./SMS: +31 6 446 835 10.
>
>> -- 
>> ubuntu-users mailing list
>> ubuntu-users at lists.ubuntu.com
>> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
>
I use a thing called streamripper for this




More information about the ubuntu-users mailing list