How to remove a damaged Wired Connection
Chas IRONS
ironscf at telkomsa.net
Sun Aug 28 18:12:51 UTC 2016
--
irons.charles at gmail.com
Home +2711 782 8623On Sun, 2016-08-28 at 11:43 -0400, Robert Heller wrote:
> At Sun, 28 Aug 2016 16:22:10 +0200 "Ubuntu user technical
> support, not for general discussions" <ubuntu-users at lists.ubuntu.com
> > wrote:
>
> >
> >
> > On Sun, 28 Aug 2016 15:18:15 +0200, Chas IRONS wrote:
> > >
> > > My Settings/Network shows two Wired entries (because my ADSL
> > > service
> > > was poor so my ISP gave me a wireless router that works) but my
> > > browser
> > > will not connect if the router is switched on first.
> > >
> > > The lower Wired entry for the eth0 DSL router shows "Cable
> > > unplugged"
> > > because it was replaced by the eth1 wireless router.
> > Hi,
> >
> > could it be, that you switched from PPPoE to DHCP, but you still
> > connect by cable and not by wifi? There was likely an issue with
> > the
> > modem and not with ADSL, so the modem to dial up was replaced by
> > the
> > router. The router likely provides LAN and WLAN.
> >
> > However, wifi unlikely is eth1, it should be wlan0, wlan1 ...
> > wlann.
> Hmmm... Not necessarily -- it is quite possible for wifi to be
> eth1. It all
> depends on what is in /etc/udev/rules.d/70-persistent-net.rules and
> /etc/network/interfaces.
Hi again Robert. Gedit shows /etc/network/interfaces content that I do
not understand :
auto lo
iface lo inet loopback
Could that cause eth0 to prevent eth1 from connecting?
and also /etc/udev/rules.d/70-persistent-net.rules contains:
# PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="10:c3:7b:6a:c5:ea", ATTR{dev_id}=="0x0",
ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# USB device 0x:0x (cdc_ether)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="3c:1e:04:96:54:05", ATTR{dev_id}=="0x0",
ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
So I see eth0 is a PCI device (was the ADSL router) and eth1 is a USB
device (the wireless router I am using now)
Thanks for showing me the basics again.
> >
> >
> > What's the output of
> >
> > lsb_release -rc; ifconfig -a
> >
> > ?
> >
> > I can't help you with Network Manager and also not really with wifi in
> > general, since I'm using a router by LAN, not by WLAN.
> >
> > However, is your wifi thingy up?
> >
> > If I connect a wifi thingy by USB, "ifconfig -a" shows it...
> >
> >
> >
> > $ ifconfig -a
> > enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> > [snip]
> >
> > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
> > [snip]
> >
> > wlp0s19f3u1: flags=4098<BROADCAST,MULTICAST> mtu 1500
> > [snip]
> >
> >
> >
> > ...but it's not shown by ifconfig...
> >
> >
> >
> > $ ifconfig
> > enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> > [snip]
> >
> > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
> > [snip]
> >
> >
> >
> > It requires to bring the Interface up...
> >
> >
> >
> > $ sudo ip link set wlp0s19f3u1 up
> >
> >
> >
> > ...then its shown:
> >
> >
> >
> > $ ifconfig
> > enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> > [snip]
> >
> > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
> > [snip]
> >
> > wlp0s19f3u1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
> > [snip]
> >
> >
> >
> > Regards,
> > Ralf
> >
> >
> >
>
>
> --
> Robert Heller -- 978-544-6933
> Deepwoods Software -- Custom Software Services
>
http://www.deepsoft.com/ -- Linux Administration Services
> -- Linux Administration Services
>
heller at deepsoft.com -- Webhosting Services
> -- Webhosting Services
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-users/attachments/20160828/fdca4f1b/attachment.html>
More information about the ubuntu-users
mailing list