System not running right

Tue Sep 22 21:04:49 UTC 2015

Yeah that did it:

scott at main:~⟫ sudo smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-63-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" HDD DT01ACA...
Device Model:     TOSHIBA DT01ACA100
Serial Number:    236GDXYPS
LU WWN Device Id: 5 000039 ff2f0d442
Firmware Version: MS2OA750
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Sep 22 17:02:30 2015 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x85) Offline data collection activity
                                         was aborted by an interrupting 
command from host.
                                         Auto Offline Data Collection: 
Enabled.
Self-test execution status:      (   0) The previous self-test routine 
completed
                                         without error or no self-test 
has ever
                                         been run.
Total time to complete Offline
data collection:                ( 7750) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                         Auto Offline data collection 
on/off support.
                                         Suspend Offline collection upon new
                                         command.
                                         Offline surface scan supported.
                                         Self-test supported.
                                         No Conveyance Self-test supported.
                                         Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                         power-saving mode.
                                         Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                         General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 130) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                         SCT Error Recovery Control 
supported.
                                         SCT Feature Control supported.
                                         SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE UPDATED  
WHEN_FAILED RAW_VALUE
   1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail 
Always       -       0
   2 Throughput_Performance  0x0005   140   140   054    Pre-fail 
Offline      -       77
   3 Spin_Up_Time            0x0007   131   131   024    Pre-fail 
Always       -       176 (Average 175)
   4 Start_Stop_Count        0x0012   100   100   000    Old_age 
Always       -       254
   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail 
Always       -       0
   7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail 
Always       -       0
   8 Seek_Time_Performance   0x0005   120   120   020    Pre-fail 
Offline      -       32
   9 Power_On_Hours          0x0012   098   098   000    Old_age 
Always       -       19188
  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail 
Always       -       0
  12 Power_Cycle_Count       0x0032   100   100   000    Old_age 
Always       -       254
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age 
Always       -       1015
193 Load_Cycle_Count        0x0012   100   100   000    Old_age 
Always       -       1015
194 Temperature_Celsius     0x0002   166   166   000    Old_age 
Always       -       36 (Min/Max 23/40)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age 
Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age 
Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age 
Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age 
Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining 
LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00% 19187         -
# 2  Short offline       Completed without error       00% 19187         -
# 3  Short offline       Completed without error       00% 19184         -
# 4  Short captive       Completed without error       00% 19182         -

SMART Selective self-test log data structure revision number 1
  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
     1        0        0  Not_testing
     2        0        0  Not_testing
     3        0        0  Not_testing
     4        0        0  Not_testing
     5        0        0  Not_testing
Selective self-test flags (0x0):
   After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

scott at main:~⟫

On 09/22/2015 04:55 PM, Brandon Vincent wrote:
> sudo smartctl -a /dev/sda

-- 
Thanks,

Scott Blair

USMC Defending your freedoms since 10 November 1775

Save on backup time "BackupDevice=Null"

If you don't stand behind our troops,
feel free to stand in front of them.