usblp0: removed

[Chris]

Each time I have to reboot whether it's due to a kernel update or
something else until I print something I see this in my syslog:

Mar 23 16:00:09 localhost kernel: [ 2424.950597] usblp0: removed
Mar 23 16:00:09 localhost kernel: [ 2424.952633] usblp 1-3.4:1.0:
usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0
pid 0x2B17
Mar 23 16:00:15 localhost kernel: [ 2430.959382] usblp0: removed
Mar 23 16:00:15 localhost kernel: [ 2430.961212] usblp 1-3.4:1.0:
usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0
pid 0x2B17
Mar 23 16:00:21 localhost kernel: [ 2436.970674] usblp0: removed
Mar 23 16:00:21 localhost kernel: [ 2436.971857] usblp 1-3.4:1.0:
usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0
pid 0x2B17

If you'll notice it's every 6 seconds. When I do print something I see
this in my syslog:

Mar 23 20:07:50 localhost kernel: [17285.533043] usblp0: removed
Mar 23 20:07:50 localhost kernel: [17285.534340] usblp 1-3.4:1.0:
usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0
pid 0x2B17
Mar 23 20:07:52 localhost hp[14114]: io/hpmud/model.c 108: unable to
open /etc/hp/hplip.conf: No such file or directory
Mar 23 20:07:52 localhost hp[14114]: io/hpmud/model.c 532: no
HP_LaserJet_1020 attributes found in /data/models/models.dat
Mar 23 20:07:52 localhost hp[14114]: io/hpmud/model.c 543: no
HP_LaserJet_1020 attributes found
in /data/models/unreleased/unreleased.dat
Mar 23 20:07:55 localhost foo2zjs-wrapper: foo2zjs-wrapper -z1 -P -L0
-r1200x600 -p1 -T3 -m1 -s7 -n1
Mar 23 20:07:56 localhost kernel: [17291.540553] usblp0: removed
Mar 23 20:07:56 localhost kernel: [17291.541713] usblp 1-3.4:1.0:
usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0
pid 0x2B17
Mar 23 20:07:58 localhost kernel: [17293.845118] usblp0: removed
Mar 23 20:07:58 localhost foo2zjs-wrapper: gs -sPAPERSIZE=letter
-g10200x6600 -r1200x600 -sDEVICE=pbmraw -dCOLORSCREEN
-dMaxBitmap=500000000  
Mar 23 20:07:58 localhost foo2zjs-wrapper: foo2zjs -r1200x600
-g10200x6600 -p1 -m1 -n1 -d1 -s7 -z1  -u 192x96 -l 192x96 -L 0  -T3
-P 

and of course the issue in the first paragraph stops. So, I'm asking,
what the heck is going on? I'm running 14.04.2 LTS
-- 
Chris
KeyID 0xE372A7DA98E6705C
31.11°N 97.89°W (Elev. 1092 ft)
07:49:29 up 16:29, 1 user, load average: 0.42, 0.20, 0.21
Ubuntu 14.04.2 LTS, kernel 3.13.0-48-generic