ubuntu-users Digest, Vol 124, Issue 58
israel molefe
israelmolefe09 at gmail.com
Tue Dec 23 17:17:30 UTC 2014
Hi.can you please assist me to set my laptop on.the screen is black with
the words.im using ubuntu 13.3.
Regards
On 23 Dec 2014 2:00 PM, <ubuntu-users-request at lists.ubuntu.com> wrote:
> Send ubuntu-users mailing list submissions to
> ubuntu-users at lists.ubuntu.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
> or, via email, send a message with subject or body 'help' to
> ubuntu-users-request at lists.ubuntu.com
>
> You can reach the person managing the list at
> ubuntu-users-owner at lists.ubuntu.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of ubuntu-users digest..."
>
>
> Today's Topics:
>
> 1. Re: Xsane not working (NoOp)
> 2. Re: Firefox problems - revisited (Charles Irons)
> 3. Re: Firefox problems - revisited (Curt Tresenriter)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 22 Dec 2014 22:13:25 -0800
> From: NoOp <glgxg at sbcglobal.net>
> To: ubuntu-users at lists.ubuntu.com
> Subject: Re: Xsane not working
> Message-ID: <m7b165$1cu$1 at ger.gmane.org>
> Content-Type: text/plain; charset=UTF-8
>
> On 12/22/2014 10:08 PM, Scott Blair wrote:
> > On 12/23/2014 12:49 AM, NoOp wrote:
> >> On 12/22/2014 10:41 AM, Scott Blair wrote:
> >>> On 12/22/2014 01:17 PM, NoOp wrote:
> >>>> On 12/21/2014 06:50 AM, Scott Blair wrote:
> >>>>> On 12/21/2014 12:09 AM, NoOp wrote:
> >>>>>> On 12/20/2014 06:58 PM, Scott Blair wrote:
> >>>>>>> On 12/20/2014 05:22 PM, NoOp wrote:
> >>>>>>>> dmesg | tail
> >>>>>>> http://paste.ubuntu.com/9585507/
> >>>>>>>
> >>>>>> Thanks. kodakaio.conf looks stock - I was looking to see if it had
> been
> >>>>>> modified for a specific IP address.
> >>>>>>
> >>>>>> I don't see Bus 001 Device 011 (device `kodakaio:libusb:001:011') in
> >>>>>> your lsusb...
> >>>>>>
> >>>>>> Turn off the scanner/printer & turn back on, then C&P to pastebin
> the
> >>>>>> last 20 or so lines of:
> >>>>>>
> >>>>>> $ dmesg
> >>>>>> $ cat /var/log/syslog
> >>>>>>
> >>>>>> and
> >>>>>>
> >>>>>> $ scanimage --list-devices
> >>>>>> $ sudo lsusb
> >>>>>>
> >>>>>> Note: you should be seeing something similar to the following
> (replacing
> >>>>>> Epson with kodak of course):
> >>>>>>
> >>>>>> $ scanimage --list-devices
> >>>>>> device `epkowa:usb:002:009' is a Epson Stylus SX620FW/Stylus Office
> >>>>>> BX625FWD/TX620FWD/ME OFFICE 960FWD/WorkForce 630 Series flatbed
> scanner
> >>>>>>
> >>>>>> $ lsusb
> >>>>>> Bus 002 Device 009: ID 04b8:085d Seiko Epson Corp. PX-603F [ME
> OFFICE
> >>>>>> 960FWD Series/Stylus Office BX625FWD/TX620FWD Series]
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>> dmesg:
> >>>> <snip>
> >>>>> [74514.945516] IPv6: wlan0: IPv6 duplicate address
> >>>>> 2601:3:3000:e17:226:82ff:fe3e:b46b detected!
> >>>>> [74516.162052] usb 1-3: new high-speed USB device number 14 using
> ehci-pci
> >>>>> [74516.308455] usb 1-3: New USB device found, idVendor=040a,
> idProduct=4043
> >>>>> [74516.308468] usb 1-3: New USB device strings: Mfr=5, Product=6,
> >>>>> SerialNumber=7
> >>>>> [74516.308475] usb 1-3: Product: KODAK ESP 3200 Series AiO
> >>>>> [74516.308481] usb 1-3: Manufacturer: Eastman Kodak Company
> >>>>> [74516.308486] usb 1-3: SerialNumber: E219160
> >>>>> [74516.323309] usblp 1-3:1.1: usblp3: USB Bidirectional printer dev
> 14
> >>>>> if 1 alt 0 proto 2 vid 0x040A pid 0x4043
> >>>>> [74516.325179] usb-storage 1-3:1.2: USB Mass Storage device detected
> >>>>> [74516.325460] scsi14 : usb-storage 1-3:1.2
> >>>>> [74517.327634] scsi 14:0:0:0: Direct-Access KODAK SD/MMC
> >>>>> card 1.00 PQ: 0 ANSI: 0
> >>>>> [74517.328418] sd 14:0:0:0: Attached scsi generic sg9 type 0
> >>>>> [74517.348059] sd 14:0:0:0: [sdg] Attached SCSI removable disk
> >>>>> [74517.496609] usblp3: removed
> >>>>> [74517.505022] usblp 1-3:1.1: usblp3: USB Bidirectional printer dev
> 14
> >>>>> if 1 alt 0 proto 2 vid 0x040A pid 0x4043
> >>>>> [74518.204426] IPv6: wlan0: IPv6 duplicate address
> >>>>> 2601:3:3000:e17:226:82ff:fe3e:b46b detected!
> >>>> <snip>
> >>>>
> >>>> IPv6 duplicate address 2601:3:3000:e17:226:82ff:fe3e:b46b detected!
> >>>>> Dec 21 09:46:50 main kernel: [74617.468186] IPv6: wlan0: IPv6
> duplicate address 2601:3:3000:e17:226:82ff:fe3e:b46b detected!
> >>>>> scott at main:~$
> >>>>>
> >>>>>
> >>>>>
> >>>>> scanimage --list-devices:
> >>>>>
> >>>>> scott at main:~$ scanimage --list-devices
> >>>>> [bjnp] create_broadcast_socket: bind socket to local address failed -
> >>>>> Cannot assign requested address
> >>>>> [bjnp] create_broadcast_socket: bind socket to local address failed -
> >>>>> Cannot assign requested address
> >>>>> device `kodakaio:libusb:001:014' is a Kodak KODAK ESP 3200 Series AiO
> >>>>> flatbed scanner
> >>>>> scott at main:~$
> >>>>>
> >>>>>
> >>>>>
> >>>>> sudo lsusb:
> >>>>>
> >>>>> scott at main:~$ sudo lsusb
> >>>>> [sudo] password for scott:
> >>>>> Bus 007 Device 005: ID 10d5:55a2 Uni Class Technology Co., Ltd 2Port
> >>>>> KVMSwitcher
> >>>>> Bus 007 Device 004: ID 045e:0745 Microsoft Corp. Nano Transceiver
> v1.0
> >>>>> for Bluetooth
> >>>>> Bus 007 Device 003: ID 046d:c526 Logitech, Inc. Nano Receiver
> >>>>> Bus 007 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
> >>>>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> >>>>> Bus 002 Device 003: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader
> >>>>> Controller
> >>>>> Bus 002 Device 002: ID 1058:070b Western Digital Technologies, Inc.
> >>>>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> >>>>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> >>>>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> >>>>> Bus 001 Device 012: ID 1058:1130 Western Digital Technologies, Inc.
> >>>>> Bus 001 Device 014: ID 040a:4043 Kodak Co.
> >>>>> Bus 001 Device 013: ID 1415:2000 Nam Tai E&E Products Ltd. or
> OmniVision
> >>>>> Technologies, Inc. Sony Playstation Eye
> >>>>> Bus 001 Device 010: ID 04cc:1521 ST-Ericsson USB 2.0 Hub
> >>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> >>>>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> >>>>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> >>>>> scott at main:~$
> >>>>>
> >>>>> Just to let you know, because I didn't mention this earlier, I did
> >>>>> uninstall and reinstall the printer.
> >>>>>
> >>>> Sorry for the delayed reply - I have to go to work.
> >>>>
> >>>> It looks like your printer is now detected and working on Bus 001
> Device
> >>>> 014, can you try scanning with xsane from the terminal again & show
> the
> >>>> output?
> >>>>
> >>>> This is a complete WAG: try installing bjnp to see if that clears the
> >>>> bjnp port issue:
> >>>>
> >>>> $ sudo apt-get install cups-backend-bjnp
> >>>>
> >>>> Afterwards, see if there is any change when using 'scanimage
> >>>> --list-devices'.
> >>>>
> >>>>
> >>>>
> >>>>
> >>> Here is the scanimage I forgot in the last email.
> >>>
> >>> scott at main:~$ scanimage
> >>> [bjnp] create_broadcast_socket: bind socket to local address failed -
> >>> Cannot assign requested address
> >>> scanimage: output is not a file, exiting
> >>> scott at main:~$ --list-devices
> >>>
> >>>
> >>
> >> Other than the "[bjnp] create_broadcast_socket: bind socket to local
> >> address failed" part, the scanimage command shows that your scanner is
> >> working, at least code-wise - otherwise it would have responded with:
> >>
> >> $ scanimage
> >> scanimage: no SANE devices found
> >>
> >> The "scanimage: output is not a file, exiting" is normal as you didn't
> >> specify an output. Put something in the scanner and:
> >>
> >> $ scanimage > image.pnm
> >>
> >> Then providing that you don't get 'scanimage: open of device kodak...
> >> failed" enter:
> >>
> >> $ eog > image.pnm
> >>
> >> and let me know if you seen the scan.
> >>
> >>
> >>
> >>
> >
> > This is what I get:
> > scott at main:~$ scanimage > image.pnm
> > [bjnp] create_broadcast_socket: bind socket to local address failed -
> > Cannot assign requested address
> > scanimage: sane_read: Error during device I/O
> > scott at main:~$ eog > image.pnm
> >
> > The image is blank.
> >
>
> Check dmesg for the last 20 lines or so & see if any useful information
> is there.
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 23 Dec 2014 11:07:15 +0200
> From: Charles Irons <charles.IRONS at webafrica.org.za>
> To: "Ubuntu user technical support, not for general discussions"
> <ubuntu-users at lists.ubuntu.com>
> Subject: Re: Firefox problems - revisited
> Message-ID: <1419325635.2210.17.camel at Charles-PC>
> Content-Type: text/plain; charset="utf-8"
>
>
>
>
> --
> irons.charles at gmail.com
> Home +2711 782 8623
> Mobile +2783 588 0028
>
>
>
>
> On Mon, 2014-12-22 at 19:23 -0500, Bill Stanley wrote:
>
> > Hi,
> >
> > I'm back again after a lot of work and investigation. The situation is
> > the same as before... See Firefox problems for the history.
> >
> > 1. The problem is that I can't connect to many sites using Flash.
> > example BBC.com
> > 2. Shockwave is strongly suspected, Firefox disables the Shockwave
> > plugin and says there are security risks and it is out of date.
> > 3. I had Mint/Mate version 16 and reinstalled it using Mint/Mate 17.1
> > (the most recent release).
> > 4. The version of Shockwave was the same old one causing the problems.
> > I had problems updating it so I installed Ubuntu / MATE.
> >
> > I thought the problem would go away but NO DICE! It's still there.
> >
> > Some other things I discovered.
> >
> > 1. The version of Shockwave for the new version of Ubuntu/Mate 14.04.1
> > is Shockwave 11.2.202.424. This is the same version that I think causes
> > the problem. Firefox has disabled it.
> >
> > 2. I dual boot with Windows 7 and I also am having problems connecting
> > to Windows update??? Could it be that I have a Windows malwaret? If
> > so, can it affect Linux? (I don't think so.) My problems with
> > connecting to Windows update might just be due to me trying to connect
> > during a busy time of day. 11:00 AM EST. I'm going to try later
> tonight.
> >
> > Is this Shockwave version the most up to date version? Perhaps A FF
> > user cold look up the version that they are using. If it is not the
> > latest version, how can I get the latest version? I looked in the
> > Ubuntu repository and can't find it.
> > ******************
>
>
> Hi Bill
>
> I am on Ubuntu 14.04.1 and Firefox Addons shows:
>
> Shockwave Flash 11.2.202.425 Last updated 12/12/2014 The file name is
> libflashplayer.so
>
> Hope that helps. ChasI
> --
> irons.charles at gmail.com
> Home +2711 782 8623
> Mobile +2783 588 0028
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://lists.ubuntu.com/archives/ubuntu-users/attachments/20141223/68182cf6/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 3
> Date: Tue, 23 Dec 2014 03:59:50 -0600
> From: Curt Tresenriter <ctres at grics.net>
> To: ubuntu-users at lists.ubuntu.com
> Subject: Re: Firefox problems - revisited
> Message-ID: <20141223035950.74403b7d at Cocobolo>
> Content-Type: text/plain; charset=US-ASCII
>
> On Mon, 22 Dec 2014 19:23:11 -0500
> Bill Stanley <bstanle at wowway.com> wrote:
>
> > Hi,
> >
> > I'm back again after a lot of work and investigation. The situation
> > is the same as before... See Firefox problems for the history.
> >
> > 1. The problem is that I can't connect to many sites using Flash.
> > example BBC.com
> > 2. Shockwave is strongly suspected, Firefox disables the Shockwave
> > plugin and says there are security risks and it is out of date.
> > 3. I had Mint/Mate version 16 and reinstalled it using Mint/Mate 17.1
> > (the most recent release).
> > 4. The version of Shockwave was the same old one causing the
> > problems. I had problems updating it so I installed Ubuntu / MATE.
> >
> > I thought the problem would go away but NO DICE! It's still there.
> >
> > Some other things I discovered.
> >
> > 1. The version of Shockwave for the new version of Ubuntu/Mate
> > 14.04.1 is Shockwave 11.2.202.424. This is the same version that I
> > think causes the problem. Firefox has disabled it.
> <snip>
>
> I've also got Shockwave version 11.2.202.425.
> I'm having an occasional problem with FF (v. 34 on Ubuntu Gnome 14.04.1)
> but videos play alright eventually but Chromium acts exactly the same
> way.
> Looks like a BBC problem to me.
>
>
>
>
>
>
> ------------------------------
>
> --
> ubuntu-users mailing list
> ubuntu-users at lists.ubuntu.com
> Modify settings or unsubscribe at:
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
>
>
> End of ubuntu-users Digest, Vol 124, Issue 58
> *********************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-users/attachments/20141223/3ab5955b/attachment.html>
More information about the ubuntu-users
mailing list