Xsane not working

Scott Blair scott.blair at gmail.com
Tue Dec 23 16:48:56 UTC 2014


On 12/23/2014 11:41 AM, NoOp wrote:
> On 12/23/2014 07:12 AM, Scott Blair wrote:
>> On 12/23/2014 01:13 AM, NoOp wrote:
> ...
>>>>>> Here is the scanimage I forgot in the last email.
>>>>>>
>>>>>> scott at main:~$ scanimage
>>>>>> [bjnp] create_broadcast_socket: bind socket to local address failed -
>>>>>> Cannot assign requested address
>>>>>> scanimage: output is not a file, exiting
>>>>>> scott at main:~$ --list-devices
>>>>>>
>>>>>>
>>>>> Other than the "[bjnp] create_broadcast_socket: bind socket to local
>>>>> address failed" part, the scanimage command shows that your scanner is
>>>>> working, at least code-wise - otherwise it would have responded with:
>>>>>
>>>>> $ scanimage
>>>>> scanimage: no SANE devices found
>>>>>
>>>>> The "scanimage: output is not a file, exiting" is normal as you didn't
>>>>> specify an output. Put something in the scanner and:
>>>>>
>>>>> $ scanimage > image.pnm
>>>>>
>>>>> Then providing that you don't get 'scanimage: open of device kodak...
>>>>> failed" enter:
>>>>>
>>>>> $ eog > image.pnm
>>>>>
>>>>> and let me know if you seen the scan.
>>>>>
>>>>>
>>>>>
>>>>>
>>>> This is what I get:
>>>> scott at main:~$ scanimage > image.pnm
>>>> [bjnp] create_broadcast_socket: bind socket to local address failed -
>>>> Cannot assign requested address
>>>> scanimage: sane_read: Error during device I/O
>>>> scott at main:~$ eog > image.pnm
>>>>
>>>> The image is blank.
>>>>
>>> Check dmesg for the last 20 lines or so & see if any useful information
>>> is there.
>>>
>>>
>> [216246.924900] usb 1-2.7: current rate 14142 is different from the
>> runtime rate 16000
>> [216246.927530] usb 1-2.7: 3:1: cannot get min/max values for control 2
>> (id 3)
>> [216247.373866] usb 1-2.7: current rate 3573 is different from the
>> runtime rate 16000
>> [216247.377887] usb 1-2.7: current rate 33186 is different from the
>> runtime rate 16000
>> [216247.430249] usb 1-2.7: current rate 406 is different from the
>> runtime rate 16000
>> [216247.436764] usb 1-2.7: current rate 7 is different from the runtime
>> rate 16000
>> [216247.439511] usb 1-2.7: 3:1: cannot get min/max values for control 2
>> (id 3)
>> [216248.172359] usblp3: removed
>> [216248.181652] usblp 1-3:1.1: usblp3: USB Bidirectional printer dev 30
>> if 1 alt 0 proto 2 vid 0x040A pid 0x4043
>> [216253.172843]  sdh: sdh1
>> [216253.174815] sd 22:0:0:0: [sdh] 732558336 4096-byte logical blocks:
>> (3.00 TB/2.72 TiB)
>> [216253.176062] sd 22:0:0:0: [sdh] Attached SCSI disk
>> [216257.401170] systemd-hostnamed[31057]: Warning: nss-myhostname is not
>> installed. Changing the local hostname might make it unresolveable.
>> Please install nss-myhostname!
>> [218401.441612] quiet_error: 1 callbacks suppressed
>> [218401.441618] Buffer I/O error on device sdi1, logical block 149243038
>> [218401.441624] Buffer I/O error on device sdi1, logical block 149243039
>> [218401.441628] Buffer I/O error on device sdi1, logical block 149243040
>> [218401.441631] Buffer I/O error on device sdi1, logical block 149243041
>> [218401.441634] Buffer I/O error on device sdi1, logical block 149243038
>> [218401.441714] Buffer I/O error on device sdi1, logical block 149243038
>> [239938.865993] audit: type=1400 audit(1419338466.978:36):
>> apparmor="STATUS" operation="profile_replace" profile="unconfined"
>> name="/usr/lib/cups/backend/cups-pdf" pid=802 comm="apparmor_parser"
>> [239938.866020] audit: type=1400 audit(1419338466.978:37):
>> apparmor="STATUS" operation="profile_replace" profile="unconfined"
>> name="/usr/sbin/cupsd" pid=802 comm="apparmor_parser"
>> [239938.876042] audit: type=1400 audit(1419338466.990:38):
>> apparmor="STATUS" operation="profile_replace" profile="unconfined"
>> name="third_party" pid=802 comm="apparmor_parser"
>> scott at main:~$
>>
> You have a lot of issues going on there... in order to troubleshoot this
> issue I recommend disconnecting all other external devices & then try
> again.
>
> BTW: to fix the nss-myhostname issue:
> $ sudo apt-get install libnss-myhostname
>
>
>
>
I know I have a lot of problems. I think I have a ghost in the machine. When
ever I hit the shift key in a terminal the files opens up. When ever I run
Xsane, I get error on all my seeds in Deluge. I really appreciate your help
in this matter. Honest opinion, think I should to a reinstall? Or work 
through
these problems?

-- 

Scott Blair

save on backup time BackUpDevice=null

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-users/attachments/20141223/5d1b550b/attachment.html>


More information about the ubuntu-users mailing list