No audio, fresh 10.04 LTS install

[Gene Heskett]

Greetings all;

I have installed several of the pulse config and viewing tools, but despite 
seeing the results of running speaker-test -c8 in pavumeter, my speakers 
are silent.  I have a decent 3 speaker setup plugged into the green jack on 
the back of an Audigy2 Value card that I can get noise out of if plugged 
into something else.

Cat /proc/asound/devices:
root at coyote:/home# cat /proc/asound/devices
  2:        : timer
  3:        : sequencer
  4: [ 0- 0]: hardware dependent
  5: [ 0- 1]: raw midi
  6: [ 0- 0]: raw midi
  7: [ 0- 3]: digital audio playback
  8: [ 0- 2]: digital audio playback
  9: [ 0- 2]: digital audio capture
 10: [ 0- 1]: digital audio capture
 11: [ 0- 0]: digital audio playback
 12: [ 0- 0]: digital audio capture
 13: [ 0]   : control
 14: [ 0- 2]: hardware dependent
 15: [ 0- 2]: raw midi
 16: [ 0- 3]: raw midi
root at coyote:/home# cat /proc/asound/cards
 0 [Audigy2        ]: Audigy2 - SB Audigy 2 Value [SB0400]
                      SB Audigy 2 Value [SB0400] (rev.0, serial:0x10011102) 
at 0x9c00, irq 17

This card cannot drive analog when spdif is on, but I can't find a tool to 
turn it on/off.  It is not showing up in alsamixer.

Ideas anybody?

Thanks.

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
My web page: <http://coyoteden.dyndns-free.com:85/gene>
Time out error: Operator fell asleep while waiting for Windows NT to 
complete
boot procedure.