Too wide of a screen

Ric Moore wayward4now at gmail.com
Wed Jan 19 00:50:05 UTC 2011


On Tue, 2011-01-18 at 17:00 -0500, Doug wrote: 
> On 01/18/2011 04:34 PM, Ray Parrish wrote:
> > On 01/17/2011 01:21 PM, Ric Moore wrote:
> >> On Mon, 2011-01-17 at 07:57 -0800, Ray Parrish wrote:
> >>> Hello,
> >>>
> >>> I have just completed upgrading from 8.04 to 10.04
> >>> and now I have a few problems.
> >>>
> >>> This first problem is that with my resolution set
> >>> to 1024x768 as I normally have it, the screen is
> >>> too wide and runs off the left side. My
> >>> applications menu on the top tool bar is almost
> >>> completely out of sight as it runs off the screen
> >>> on the left side.
> >>
> /snip/
> > OK, I tried that, and there was no change. I'm wondering if nvidia's 
> > driver thinks that I am running a different sized monitor than the 15 
> > inch TFT LCD Jetway I have?
> >
> > The nvidia settings dialog reports my screen size as being 313 x 232 
> > millimeters, which I have no way of measuring to verify as I have no 
> > metric rules to use.
> >
> > It also reports a resolution of 83 x 84 dots per inch, which I am not 
> > sure of either.
> >
> > Is there any way to change the size reported above to see if the 
> > screen shrinks down to the correct size?
> >
> > I know from previous experience that this monitor does not correctly 
> > report it's data. I used some of the tools I found in Ubuntu to query 
> > the monitor's information, and it always told me that the monitor was 
> > not returning the information.
> >
> > Later, Ray Parrish
> >
> To convert from millimeters to inches, divide by 25.4.  Doing this says 
> the screen is just over 15" diagonal, which is what you say you have.
> The conversion also shows that the resolution is ~ 1020 x 760, which is 
> realistic for a small screen in 4 x 3 proportion, which is what the
> screen proportion calculates to--the older (better) screen proportion.  
> It sounds like you have a driver problem--maybe the wrong one, or maybe 
> you are sending it the wrong information.  If there are any manual setup 
> abilities, now is the time to utilize them.

I agree, so it might be time to trouble shoot with a shotgun. Fire up
the nVidia thing again and the second tab (X Server Display
Configuration) will allow different settings from a drop down chose-em
list. But first, SAVE your current /etc/X11/xorg.conf file to something
you'll remember, grab your monitor manual and then play with different
settings. 

Just don't go overboard and blow something up. Heh, in the old days I
did just that, took the flyback out using too high a frequency setting.
I cried and cried back when a 15" multisync was a more than a week's
pay. Like the "Ryhme of the Ancient Mariner", I had to hang it around my
neck and fall back to my older 14" POS for quite awhile. Good Luck.
Remember to write out the new experimental config file and logout to log
back in, between settings. I'd keep one finger on the power switch. If
it starts singing, quick hit the switch! 

:) Ric


-- 
My father, Victor Moore (Vic) used to say:
"There are two Great Sins in the world...
..the Sin of Ignorance, and the Sin of Stupidity.
Only the former may be overcome." R.I.P. Dad.
Linux user# 44256 





More information about the ubuntu-users mailing list