Upgrade to 9.04 / No sound nor recording / Xonar DX

scar scar at drigon.com
Thu Jan 28 19:54:51 UTC 2010


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

maybe i should just try upgrading to 9.10?

it doesn't make sense that i should need to run all these customized
scripts, reinstall latest ALSA from source, etc.

9.10 maybe still has lots of problems.  i know there was a bug that
prevented the system loading if / partition was encrypted, but that
doesn't appear in the errata anymore.  if that has been fixed, maybe
upgrading now is worth a try.


anyway, i noticed i had no "hardware output device" listed in the
pulseaudio volume control, so i tried:

$ sudo alsa force-reload
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system
/home/scar/.gvfs
      Output information may be incomplete.
Terminating processes: 4300 4457 4549lsof: WARNING: can't stat()
fuse.gvfs-fuse-daemon file system /home/scar/.gvfs
      Output information may be incomplete.
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system
/home/scar/.gvfs
      Output information may be incomplete.
.
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system
/home/scar/.gvfs
      Output information may be incomplete.
Unloading ALSA sound driver modules: snd-virtuoso snd-oxygen-lib
snd-pcm-oss snd-mixer-oss snd-pcm snd-page-alloc snd-mpu401-uart
snd-seq-dummy snd-seq-oss snd-seq-midi snd-seq-midi-event snd-seq
snd-timer snd-rawmidi snd-seq-device.
Loading ALSA sound driver modules: snd-virtuoso snd-oxygen-lib
snd-pcm-oss snd-mixer-oss snd-pcm snd-page-alloc snd-mpu401-uart
snd-seq-dummy snd-seq-oss snd-seq-midi snd-seq-midi-event snd-seq
snd-timer snd-rawmidi snd-seq-deviceWARNING: All config files need
.conf: /etc/modprobe.d/nvidia-kernel-nkc, it will be ignored in a future
release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
Usage: /sbin/modprobe [-v] [-V] [-C config-file] [-d <dirname> ] [-n]
[-i] [-q] [-b] [-o <modname>] [ --dump-modversions ] <modname>
[parameters...]
/sbin/modprobe -r [-n] [-i] [-v] <modulename> ...
/sbin/modprobe -l -t <dirname> [ -a <modulename> ...]
WARNING: Error running install command for snd
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc,
it will be ignored in a future release.
.

$ pkill pulseaudio
$ pulseaudio -vv
I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
I: caps.c: Dropping root privileges.
I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
D: main.c: Started as real root: no, suid root: yes
I: main.c: PolicyKit refuses acquire-high-priority privilege.
N: main.c: Called SUID root and real-time and/or high-priority
scheduling was requested in the configuration. However, we lack the
necessary privileges:
N: main.c: We are not in group 'pulse-rt', PolicyKit refuse to grant us
the requested privileges and we have no increase
RLIMIT_NICE/RLIMIT_RTPRIO resource limits.
N: main.c: For enabling real-time/high-priority scheduling please
acquire the appropriate PolicyKit privileges, or become a member of
'pulse-rt', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits
for this user.
I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
D: main.c: Can realtime: no, can high-priority: no
D: main.c: Can realtime: no, can high-priority: no
I: main.c: This is PulseAudio 0.9.14
D: main.c: Compilation host: x86_64-pc-linux-gnu
D: main.c: Compilation CFLAGS: -g -O2 -g -Wall -O3 -Wall -W -Wextra
- -pedantic -pipe -Wno-long-long -Wvla -Wno-overlength-strings
- -Wconversion -Wundef -Wformat -Wlogical-op -Wpacked -Wformat-security
- -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition
- -Wdeclaration-after-statement -Wfloat-equal -Wmissing-declarations
- -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls
- -Wmissing-noreturn -Wshadow -Wendif-labels -Wpointer-arith -Wcast-align
- -Wwrite-strings -Wno-unused-parameter -ffast-math
D: main.c: Running on host: Linux x86_64 2.6.28-17-generic #58-Ubuntu
SMP Tue Dec 1 21:27:25 UTC 2009
I: main.c: Page size is 4096 bytes
D: main.c: Compiled with Valgrind support: no
D: main.c: Running in valgrind mode: no
D: main.c: Optimized build: yes
I: main.c: Machine ID is 0ba2c137925f8152d1e8cfe44923ab9b.
I: main.c: Using runtime directory
/home/scar/.pulse/0ba2c137925f8152d1e8cfe44923ab9b:runtime.
I: main.c: Using state directory /home/scar/.pulse.
I: main.c: Running in system mode: no
I: main.c: Fresh high-resolution timers available! Bon appetit!
D: memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB
each, total size is 64.0 MiB, maximum usable slot size is 65472
D: cli-command.c: Checking for existance of
'/usr/lib/pulse-0.9/modules/module-gconf.so': success
I: module.c: Loaded "module-gconf" (index: #0; argument: "").
I: module.c: Loaded "module-suspend-on-idle" (index: #1; argument: "").
I: module-device-restore.c: Sucessfully opened database file
'/home/scar/.pulse/0ba2c137925f8152d1e8cfe44923ab9b:device-volumes.x86_64-pc-linux-gnu.gdbm'.
I: module.c: Loaded "module-device-restore" (index: #2; argument: "").
I: module-stream-restore.c: Sucessfully opened database file
'/home/scar/.pulse/0ba2c137925f8152d1e8cfe44923ab9b:stream-volumes.x86_64-pc-linux-gnu.gdbm'.
I: module.c: Loaded "module-stream-restore" (index: #3; argument: "").
D: cli-command.c: Checking for existance of
'/usr/lib/pulse-0.9/modules/module-hal-detect.so': success
I: module-hal-detect.c: Trying capability alsa
D: module-hal-detect.c: Loading module-alsa-sink with arguments
'device_id=0
sink_name=alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0 tsched=0'
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
I: module-alsa-sink.c: Successfully opened device front:0.
I: module-alsa-sink.c: Successfully enabled mmap() mode.
I: (alsa-lib)control.c: Invalid CTL front:0
I: alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: alsa-util.c: Successfully attached to mixer 'hw:0'
I: alsa-util.c: Using mixer control "Master".
I: module-device-restore.c: Restoring volume for sink
alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0.
I: module-device-restore.c: Restoring mute state for sink
alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0.
I: sink.c: Created sink 0
"alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0" with sample
spec s16le 2ch 44100Hz and channel map front-left,front-right
I: module-device-restore.c: Restoring volume for source
alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0.monitor.
I: module-device-restore.c: Restoring mute state for source
alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0.monitor.
I: source.c: Created source 0
"alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0.monitor" with
sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: module-alsa-sink.c: Using 8 fragments of size 1760 bytes, buffer time
is 79.82ms
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
I: module-alsa-sink.c: Volume ranges from 0 to 127.
I: module-alsa-sink.c: Volume ranges from -127.00 dB to 0.00 dB.
I: alsa-util.c: All 2 channels can be mapped to mixer channels.
I: module-alsa-sink.c: Using hardware volume control. Hardware dB scale
supported.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Hardware PCM card 0 'Xonar DX' device 0 subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c:   stream       : PLAYBACK
D: alsa-util.c:   access       : MMAP_INTERLEAVED
D: alsa-util.c:   format       : S16_LE
D: alsa-util.c:   subformat    : STD
D: alsa-util.c:   channels     : 2
D: alsa-util.c:   rate         : 44100
D: alsa-util.c:   exact rate   : 44100 (44100/1)
D: alsa-util.c:   msbits       : 16
D: alsa-util.c:   buffer_size  : 3520
D: alsa-util.c:   period_size  : 440
D: alsa-util.c:   period_time  : 9977
D: alsa-util.c:   tstamp_mode  : ENABLE
D: alsa-util.c:   period_step  : 1
D: alsa-util.c:   avail_min    : 440
D: alsa-util.c:   period_event : 0
D: alsa-util.c:   start_threshold  : -1
D: alsa-util.c:   stop_threshold   : 7926335344172072960
D: alsa-util.c:   silence_threshold: 0
D: alsa-util.c:   silence_size : 0
D: alsa-util.c:   boundary     : 7926335344172072960
D: module-alsa-sink.c: Thread starting up
D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+29
D: module-alsa-sink.c: Requested volume: 0: 100% 1: 100%
D: module-alsa-sink.c: Got hardware volume: 0: 100% 1: 100%
D: module-alsa-sink.c: Calculated software volume: 0: 100% 1: 100%
I: module-alsa-sink.c: Starting playback.
D: module-suspend-on-idle.c: Source
alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0.monitor becomes idle.
D: module-suspend-on-idle.c: Sink
alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0 becomes idle.
I: module.c: Loaded "module-alsa-sink" (index: #4; argument:
"device_id=0
sink_name=alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0 tsched=0").
D: module-hal-detect.c: Not loaded device
/org/freedesktop/Hal/devices/pci_13f6_8788_sound_card_0_alsa_control__1
D: module-hal-detect.c: Loading module-alsa-source with arguments
'device_id=0
source_name=alsa_input.pci_13f6_8788_sound_card_0_alsa_capture_0 tsched=0'
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
I: module-alsa-source.c: Successfully opened device front:0.
I: module-alsa-source.c: Successfully enabled mmap() mode.
I: (alsa-lib)control.c: Invalid CTL front:0
I: alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: alsa-util.c: Successfully attached to mixer 'hw:0'
I: alsa-util.c: Cannot find mixer control "Capture" or mixer control is
no combination of switch/volume.
I: alsa-util.c: Using mixer control "Mic".
I: module-device-restore.c: Restoring volume for source
alsa_input.pci_13f6_8788_sound_card_0_alsa_capture_0.
I: module-device-restore.c: Restoring mute state for source
alsa_input.pci_13f6_8788_sound_card_0_alsa_capture_0.
I: source.c: Created source 1
"alsa_input.pci_13f6_8788_sound_card_0_alsa_capture_0" with sample spec
s16le 2ch 44100Hz and channel map front-left,front-right
I: module-alsa-source.c: Using 8 fragments of size 1760 bytes, buffer
time is 79.82ms
D: module-alsa-source.c: hwbuf_unused=0
D: module-alsa-source.c: setting avail_min=1
I: module-alsa-source.c: Volume ranges from 0 to 31.
I: module-alsa-source.c: Volume ranges from -34.50 dB to 12.00 dB.
I: alsa-util.c: All 2 channels can be mapped to mixer channels.
I: module-alsa-source.c: Using hardware volume control. Hardware dB
scale supported.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Hardware PCM card 0 'Xonar DX' device 0 subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c:   stream       : CAPTURE
D: alsa-util.c:   access       : MMAP_INTERLEAVED
D: alsa-util.c:   format       : S16_LE
D: alsa-util.c:   subformat    : STD
D: alsa-util.c:   channels     : 2
D: alsa-util.c:   rate         : 44100
D: alsa-util.c:   exact rate   : 44100 (44100/1)
D: alsa-util.c:   msbits       : 16
D: alsa-util.c:   buffer_size  : 3520
D: alsa-util.c:   period_size  : 440
D: alsa-util.c:   period_time  : 9977
D: alsa-util.c:   tstamp_mode  : ENABLE
D: alsa-util.c:   period_step  : 1
D: alsa-util.c:   avail_min    : 440
D: alsa-util.c:   period_event : 0
D: alsa-util.c:   start_threshold  : -1
D: alsa-util.c:   stop_threshold   : 7926335344172072960
D: alsa-util.c:   silence_threshold: 0
D: alsa-util.c:   silence_size : 0
D: alsa-util.c:   boundary     : 7926335344172072960
D: module-alsa-source.c: Thread starting up
D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+28
D: module-alsa-source.c: Requested volume: 0:  22% 1:  22%
D: module-alsa-source.c: Got hardware volume: 0:  25% 1:  25%
D: module-alsa-source.c: Calculated software volume: 0:  97% 1:  97%
D: module-suspend-on-idle.c: Source
alsa_input.pci_13f6_8788_sound_card_0_alsa_capture_0 becomes idle.
I: module.c: Loaded "module-alsa-source" (index: #5; argument:
"device_id=0
source_name=alsa_input.pci_13f6_8788_sound_card_0_alsa_capture_0 tsched=0").
D: module-hal-detect.c: Not loaded device
/org/freedesktop/Hal/devices/pci_13f6_8788_sound_card_0_alsa_playback_1
D: module-hal-detect.c: Not loaded device
/org/freedesktop/Hal/devices/computer_alsa_sequencer
D: module-hal-detect.c: Not loaded device
/org/freedesktop/Hal/devices/computer_alsa_timer
I: module-hal-detect.c: Loaded 2 modules.
I: module.c: Loaded "module-hal-detect" (index: #6; argument: "tsched=0").
D: cli-command.c: Checking for existance of
'/usr/lib/pulse-0.9/modules/module-esound-protocol-unix.so': success
I: module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: "").
I: module.c: Loaded "module-native-protocol-unix" (index: #8; argument: "").
I: module-default-device-restore.c: Saved default sink 'combined' not
existant, not restoring default sink setting.
I: module-default-device-restore.c: Restored default source
'alsa_input.pci_13f6_8788_sound_card_0_alsa_capture_0'.
I: module.c: Loaded "module-default-device-restore" (index: #9;
argument: "").
I: module.c: Loaded "module-rescue-streams" (index: #10; argument: "").
I: module.c: Loaded "module-always-sink" (index: #11; argument: "").
I: client.c: Created 0 "ConsoleKit Session
/org/freedesktop/ConsoleKit/Session1"
D: module-console-kit.c: Added new session
/org/freedesktop/ConsoleKit/Session1
I: module.c: Loaded "module-console-kit" (index: #12; argument: "").
I: module.c: Loaded "module-position-event-sounds" (index: #13;
argument: "").
I: main.c: Daemon startup complete.
D: module-hal-detect.c: dbus: interface=org.freedesktop.DBus,
path=/org/freedesktop/DBus, member=NameAcquired
D: module-console-kit.c: dbus: interface=org.freedesktop.DBus,
path=/org/freedesktop/DBus, member=NameAcquired
D: module-alsa-source.c: Read hardware volume: 0:  22% 1:  22%
I: module-suspend-on-idle.c: Sink
alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0 idle for too
long, suspending ...
I: module-alsa-sink.c: Device suspended...
I: module-suspend-on-idle.c: Source
alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0.monitor idle for
too long, suspending ...
I: module-suspend-on-idle.c: Source
alsa_input.pci_13f6_8788_sound_card_0_alsa_capture_0 idle for too long,
suspending ...
I: module-alsa-source.c: Device suspended...
I: client.c: Created 1 "Native client (UNIX socket client)"
D: protocol-native.c: Protocol version: remote 14, local 14
I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
D: protocol-native.c: SHM possible: yes
D: protocol-native.c: Negotiated SHM: yes
I: client.c: Freed 1 "PulseAudio Manager"
I: protocol-native.c: Connection died.
I: client.c: Created 2 "Native client (UNIX socket client)"
D: protocol-native.c: Protocol version: remote 14, local 14
I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
D: protocol-native.c: SHM possible: yes
D: protocol-native.c: Negotiated SHM: yes
D: module-suspend-on-idle.c: Source
alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0.monitor becomes idle.
D: module-suspend-on-idle.c: Source
alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0.monitor becomes busy.
D: resampler.c: Channel matrix:
D: resampler.c:        I00   I01
D: resampler.c:     +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432,
tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 0 "Peak detect" on
alsa_output.pci_13f6_8788_sound_card_0_alsa_playback_0.monitor with
sample spec float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0,
base=4, prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
I: module-stream-restore.c: Not restoring device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol, because
already set
I: module-alsa-source.c: Trying resume...
D: module-alsa-source.c: hwbuf_unused=0
D: module-alsa-source.c: setting avail_min=1
I: module-alsa-source.c: Resumed successfully...
D: module-suspend-on-idle.c: Source
alsa_input.pci_13f6_8788_sound_card_0_alsa_capture_0 becomes idle.
D: module-suspend-on-idle.c: Source
alsa_input.pci_13f6_8788_sound_card_0_alsa_capture_0 becomes busy.
D: resampler.c: Channel matrix:
D: resampler.c:        I00   I01
D: resampler.c:     +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432,
tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 1 "Peak detect" on
alsa_input.pci_13f6_8788_sound_card_0_alsa_capture_0 with sample spec
float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0,
base=4, prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
D: module-alsa-source.c: hwbuf_unused=0
D: module-alsa-source.c: setting avail_min=1
D: module-alsa-source.c: hwbuf_unused=0
D: module-alsa-source.c: setting avail_min=1
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
D: module-hal-detect.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-console-kit.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
I: module-stream-restore.c: Synced.
I: client.c: Created 3 "Native client (UNIX socket client)"
D: protocol-native.c: Protocol version: remote 14, local 14
I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
D: protocol-native.c: SHM possible: yes
D: protocol-native.c: Negotiated SHM: yes
I: client.c: Freed 3 "Rhythmbox"
I: protocol-native.c: Connection died.
I: client.c: Created 4 "Native client (UNIX socket client)"
D: protocol-native.c: Protocol version: remote 14, local 14
I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
D: protocol-native.c: SHM possible: yes
D: protocol-native.c: Negotiated SHM: yes
I: client.c: Freed 4 "Rhythmbox"
I: protocol-native.c: Connection died.
I: client.c: Created 5 "Native client (UNIX socket client)"
D: protocol-native.c: Protocol version: remote 14, local 14
I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
D: protocol-native.c: SHM possible: yes
D: protocol-native.c: Negotiated SHM: yes
I: client.c: Freed 5 "Rhythmbox"
I: protocol-native.c: Connection died.
D: module-hal-detect.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-console-kit.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-hal-detect.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-console-kit.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
I: client.c: Created 6 "Native client (UNIX socket client)"
D: protocol-native.c: Protocol version: remote 14, local 14
I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
D: protocol-native.c: SHM possible: yes
D: protocol-native.c: Negotiated SHM: yes
I: client.c: Freed 6 "Rhythmbox"
I: protocol-native.c: Connection died.
I: client.c: Created 7 "Native client (UNIX socket client)"
D: protocol-native.c: Protocol version: remote 14, local 14
I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
D: protocol-native.c: SHM possible: yes
D: protocol-native.c: Negotiated SHM: yes
D: module-hal-detect.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-console-kit.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-hal-detect.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-console-kit.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-hal-detect.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-console-kit.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-hal-detect.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-console-kit.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-hal-detect.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-console-kit.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-hal-detect.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified
D: module-console-kit.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/usb_device_51d_2_JB0522031778_if0_hiddev,
member=PropertyModified

now i can see "Xonar DX - Multichannel" in hardware output devices.
however, rhythmbox isn't playing anymore: see output above ("I:
protocol-native.c: Connection died.")


if i go to sound preferences and set device to "pulseaudio sound server"
then "test" i get error:
audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample !
gconfaudiosink: Failed to connect stream: Invalid argument
-----BEGIN PGP SIGNATURE-----

iEYEAREIAAYFAkth64oACgkQXhfCJNu98qA3IgCaAi/qU57yuatdOq1PmZ0b7KMI
hZQAoLvKSKxl37g7wwtcWFR7726CW9ph
=2ZiA
-----END PGP SIGNATURE-----





More information about the ubuntu-users mailing list