Dell Inspiron 5150 - Suspend to RAM not working... still (part deux)

Dave Woyciesjes woyciesjes at sbcglobal.net
Fri Feb 12 17:11:27 UTC 2010


dmesg output:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-19-generic (buildd at palmer) (gcc 
version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #56-Ubuntu SMP Thu Jan 28 
01:26:53 UTC 2010 (Ubuntu 2.6.31-19.56-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffcf800 (usable)
[    0.000000]  BIOS-e820: 000000003ffcf800 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec20000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] last_pfn = 0x3ffcf max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 0FEDA0000 mask FFFFE0000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 
0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 
(usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009f000 (usable)
[    0.000000]  modified: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003ffcf800 (usable)
[    0.000000]  modified: 000000003ffcf800 - 0000000040000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec20000 (reserved)
[    0.000000]  modified: 00000000feda0000 - 00000000fee10000 (reserved)
[    0.000000]  modified: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 37865000 - 37fef4ef
[    0.000000] Allocated new RAMDISK: 008ad000 - 010374ef
[    0.000000] Move RAMDISK from 0000000037865000 - 0000000037fef4ee to 
008ad000 - 010374ee
[    0.000000] ACPI: RSDP 000fdea0 00014 (v00 DELL  )
[    0.000000] ACPI: RSDT 3fff0000 00030 (v01 DELL    CPi R   27D40702 
ASL  00000061)
[    0.000000] ACPI: FACP 3fff0400 00074 (v01 DELL    CPi R   27D40702 
ASL  00000061)
[    0.000000] ACPI: DSDT 3fff1000 02357 (v01 INT430 SYSFexxx 00001001 
MSFT 0100000E)
[    0.000000] ACPI: FACS 3ffff800 00040
[    0.000000] ACPI: APIC 3fff0c00 00068 (v01 DELL    CPi R   27D40702 
ASL  00000047)
[    0.000000] ACPI: BOOT 3fff07c0 00028 (v01 DELL    CPi R   27D40702 
ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 135MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> 
[0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> 
[0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> 
[0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008a80a0]    TEXT DATA BSS ==> 
[0000100000 - 00008a80a0]
[    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==> 
[000009f000 - 0000100000]
[    0.000000]   #5 [00008a9000 - 00008ac1a4]              BRK ==> 
[00008a9000 - 00008ac1a4]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> 
[0000007000 - 0000008000]
[    0.000000]   #7 [00008ad000 - 00010374ef]      NEW RAMDISK ==> 
[00008ad000 - 00010374ef]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> 
[0000008000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003ffcf
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003ffcf
[    0.000000] On node 0 totalpages: 261994
[    0.000000] free_area_init_node: node 0, pgdat c0784960, node_mem_map 
c1038000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 272 pages used for memmap
[    0.000000]   HighMem zone: 34497 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 
0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 
0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 
00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 
0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 
40000000:bec00000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages at c183d000, static data 35612 
bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on. 
Total pages: 259946
[    0.000000] Kernel command line: 
root=UUID=ca4419ff-36eb-414b-84a0-970822fa73c8 ro splash vga=792
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 
bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 
bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5241900 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't 
want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003ffcf)
[    0.000000] Memory: 1017856k/1048380k available (4567k kernel code, 
29848k reserved, 2141k data, 540k init, 139076k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB)
[    0.000000]       .data : 0xc0575c48 - 0xc078d408   (2141 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0575c48   (4567 kB)
[    0.000000] Checking if this processor honours the WP bit even in 
supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, 
CPUs=2, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3056.460 MHz processor.
[    0.000044] Console: colour dummy device 80x25
[    0.000049] console [tty0] enabled
[    0.004015] Calibrating delay loop (skipped), value calculated using 
timer frequency.. 6112.92 BogoMIPS (lpj=12225840)
[    0.004054] Security Framework initialized
[    0.004089] AppArmor: AppArmor initialized
[    0.004101] Mount-cache hash table entries: 512
[    0.004306] Initializing cgroup subsys ns
[    0.004317] Initializing cgroup subsys cpuacct
[    0.004324] Initializing cgroup subsys memory
[    0.004335] Initializing cgroup subsys freezer
[    0.004340] Initializing cgroup subsys net_cls
[    0.004363] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.004370] CPU: L2 cache: 512K
[    0.004374] CPU: Hyper-Threading is disabled
[    0.004381] mce: CPU supports 4 MCE banks
[    0.004395] CPU0: Thermal monitoring enabled (TM1)
[    0.004413] Performance Counters: no PMU driver, software counters only.
[    0.004424] Checking 'hlt' instruction... OK.
[    0.020875] SMP alternatives: switching to UP code
[    0.028021] ACPI: Core revision 20090521
[    0.036408] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076806] CPU0: Mobile Intel(R) Pentium(R) 4     CPU 3.06GHz 
stepping 09
[    0.080001] Brought up 1 CPUs
[    0.080001] Total of 1 processors activated (6112.92 BogoMIPS).
[    0.080001] CPU0 attaching NULL sched-domain.
[    0.080001] Booting paravirtualized kernel on bare hardware
[    0.080001] regulator: core version 0.5
[    0.080001] Time: 19:48:15  Date: 02/11/10
[    0.080001] NET: Registered protocol family 16
[    0.080001] EISA bus registered
[    0.080001] ACPI: bus type pci registered
[    0.127476] PCI: PCI BIOS revision 2.10 entry at 0xfcf1e, last bus=2
[    0.127482] PCI: Using configuration type 1 for base access
[    0.128560] bio: create slab <bio-0> at 0
[    0.129032] ACPI: EC: Look up EC in DSDT
[    0.133116] ACPI: Interpreter enabled
[    0.133131] ACPI: (supports S0 S1 S3 S4 S5)
[    0.133160] ACPI: Using IOAPIC for interrupt routing
[    0.139090] ACPI: No dock devices found.
[    0.144787] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.144841] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
[    0.145019] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
[    0.145071] pci 0000:00:1d.1: reg 20 io port: [0xbf40-0xbf5f]
[    0.145121] pci 0000:00:1d.2: reg 20 io port: [0xbf20-0xbf3f]
[    0.145180] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4fffc00-0xf4ffffff]
[    0.145235] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.145242] pci 0000:00:1d.7: PME# disabled
[    0.145331] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 
ACPI/GPIO/TCO
[    0.145339] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH4 
GPIO
[    0.145366] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[    0.145372] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[    0.145379] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[    0.145386] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[    0.145393] pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf]
[    0.145401] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[    0.145443] pci 0000:00:1f.5: reg 10 io port: [0xb800-0xb8ff]
[    0.145449] pci 0000:00:1f.5: reg 14 io port: [0xbc40-0xbc7f]
[    0.145456] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf4fff800-0xf4fff9ff]
[    0.145463] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf4fff400-0xf4fff4ff]
[    0.145490] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.145497] pci 0000:00:1f.5: PME# disabled
[    0.145535] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
[    0.145542] pci 0000:01:00.0: reg 14 32bit mmio: [0xd0000000-0xdfffffff]
[    0.145559] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.145607] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[    0.145611] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
[    0.145615] pci 0000:00:01.0: bridge 32bit mmio pref: 
[0xd0000000-0xdfffffff]
[    0.145651] pci 0000:02:01.0: reg 10 32bit mmio: [0xfaffe000-0xfaffffff]
[    0.145689] pci 0000:02:01.0: supports D1 D2
[    0.145692] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.145698] pci 0000:02:01.0: PME# disabled
[    0.145732] pci 0000:02:02.0: reg 10 32bit mmio: [0xfaffd000-0xfaffdfff]
[    0.145773] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[    0.145780] pci 0000:02:02.0: PME# disabled
[    0.145815] pci 0000:02:04.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.145833] pci 0000:02:04.0: supports D1 D2
[    0.145835] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.145842] pci 0000:02:04.0: PME# disabled
[    0.145879] pci 0000:02:04.1: reg 10 32bit mmio: [0xfaffc800-0xfaffcfff]
[    0.145886] pci 0000:02:04.1: reg 14 32bit mmio: [0xfaff8000-0xfaffbfff]
[    0.145924] pci 0000:02:04.1: supports D1 D2
[    0.145926] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot
[    0.145933] pci 0000:02:04.1: PME# disabled
[    0.145976] pci 0000:00:1e.0: transparent bridge
[    0.145982] pci 0000:00:1e.0: bridge io port: [0xd000-0xefff]
[    0.145986] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6000000-0xfbffffff]
[    0.146015] pci_bus 0000:00: on NUMA node 0
[    0.146020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.146207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.146265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[    0.151318] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[    0.151450] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
[    0.151576] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[    0.151701] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[    0.151827] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 
12 14 15)
[    0.151958] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 
12 14 15)
[    0.152209] SCSI subsystem initialized
[    0.152307] libata version 3.00 loaded.
[    0.152400] usbcore: registered new interface driver usbfs
[    0.152433] usbcore: registered new interface driver hub
[    0.152465] usbcore: registered new device driver usb
[    0.152618] ACPI: WMI: Mapper loaded
[    0.152623] PCI: Using ACPI for IRQ routing
[    0.152796] Bluetooth: Core ver 2.15
[    0.152839] NET: Registered protocol family 31
[    0.152844] Bluetooth: HCI device and connection manager initialized
[    0.152850] Bluetooth: HCI socket layer initialized
[    0.152854] NetLabel: Initializing
[    0.152857] NetLabel:  domain hash size = 128
[    0.152860] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.152877] NetLabel:  unlabeled traffic allowed by default
[    0.154898] pnp: PnP ACPI init
[    0.154949] ACPI: bus type pnp registered
[    0.166473] pnp 00:02: io resource (0x1000-0x1005) overlaps 
0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.166483] pnp 00:02: io resource (0x1008-0x100f) overlaps 
0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.166563] pnp 00:03: io resource (0x1006-0x1007) overlaps 
0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.166572] pnp 00:03: io resource (0x1010-0x105f) overlaps 
0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.166580] pnp 00:03: io resource (0x1060-0x107f) overlaps 
0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.167280] pnp: PnP ACPI: found 11 devices
[    0.167286] ACPI: ACPI bus type pnp unregistered
[    0.167293] PnPBIOS: Disabled by ACPI PNP
[    0.167309] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[    0.167316] system 00:00: iomem range 0x9fc00-0x9ffff could not be 
reserved
[    0.167322] system 00:00: iomem range 0xc0000-0xcffff could not be 
reserved
[    0.167328] system 00:00: iomem range 0xe0000-0xfffff could not be 
reserved
[    0.167334] system 00:00: iomem range 0x100000-0x3ffeffff could not 
be reserved
[    0.167340] system 00:00: iomem range 0x3fff0000-0x3fffffff has been 
reserved
[    0.167346] system 00:00: iomem range 0xfec10000-0xfec1ffff has been 
reserved
[    0.167352] system 00:00: iomem range 0xfeda0000-0xfedfffff has been 
reserved
[    0.167358] system 00:00: iomem range 0xffb00000-0xffbfffff has been 
reserved
[    0.167364] system 00:00: iomem range 0xfec00000-0xfec0ffff could not 
be reserved
[    0.167370] system 00:00: iomem range 0xfee00000-0xfee0ffff has been 
reserved
[    0.167382] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.167388] system 00:02: ioport range 0x800-0x80f has been reserved
[    0.167397] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[    0.167404] system 00:03: ioport range 0x1080-0x10bf has been reserved
[    0.167409] system 00:03: ioport range 0x10c0-0x10df has been reserved
[    0.167414] system 00:03: ioport range 0x10e0-0x10ff has been reserved
[    0.167425] system 00:08: ioport range 0x900-0x97f has been reserved
[    0.202119] AppArmor: AppArmor Filesystem Enabled
[    0.202156] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.202162] pci 0000:00:01.0:   IO window: 0xc000-0xcfff
[    0.202169] pci 0000:00:01.0:   MEM window: 0xfc000000-0xfdffffff
[    0.202175] pci 0000:00:01.0:   PREFETCH window: 0xd0000000-0xdfffffff
[    0.202186] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
[    0.202191] pci 0000:02:04.0:   IO window: 0x00d000-0x00d0ff
[    0.202197] pci 0000:02:04.0:   IO window: 0x00d400-0x00d4ff
[    0.202203] pci 0000:02:04.0:   PREFETCH window: 0x40000000-0x43ffffff
[    0.202210] pci 0000:02:04.0:   MEM window: 0x48000000-0x4bffffff
[    0.202216] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.202222] pci 0000:00:1e.0:   IO window: 0xd000-0xefff
[    0.202229] pci 0000:00:1e.0:   MEM window: 0xf6000000-0xfbffffff
[    0.202236] pci 0000:00:1e.0:   PREFETCH window: 0x40000000-0x43ffffff
[    0.202254] pci 0000:00:1e.0: setting latency timer to 64
[    0.202262] pci 0000:02:04.0: enabling device (0000 -> 0003)
[    0.202273]   alloc irq_desc for 16 on node -1
[    0.202275]   alloc kstat_irqs on node -1
[    0.202283] pci 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.202294] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.202297] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.202300] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
[    0.202302] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff]
[    0.202305] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.202308] pci_bus 0000:02: resource 0 io:  [0xd000-0xefff]
[    0.202310] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xfbffffff]
[    0.202313] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff]
[    0.202316] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.202318] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.202321] pci_bus 0000:03: resource 0 io:  [0xd000-0xd0ff]
[    0.202324] pci_bus 0000:03: resource 1 io:  [0xd400-0xd4ff]
[    0.202326] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff]
[    0.202329] pci_bus 0000:03: resource 3 mem: [0x48000000-0x4bffffff]
[    0.202375] NET: Registered protocol family 2
[    0.202491] IP route cache hash table entries: 32768 (order: 5, 
131072 bytes)
[    0.202930] TCP established hash table entries: 131072 (order: 8, 
1048576 bytes)
[    0.204092] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.204765] TCP: Hash tables configured (established 131072 bind 65536)
[    0.204779] TCP reno registered
[    0.204970] NET: Registered protocol family 1
[    0.205082] Trying to unpack rootfs image as initramfs...
[    0.431277] Freeing initrd memory: 7721k freed
[    0.442117] Simple Boot Flag at 0x79 set to 0x1
[    0.442373] cpufreq-nforce2: No nForce2 chipset.
[    0.442420] Scanning for low memory corruption every 60 seconds
[    0.442565] audit: initializing netlink socket (disabled)
[    0.442595] type=2000 audit(1265917695.440:1): initialized
[    0.449761] highmem bounce pool size: 64 pages
[    0.449776] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.451215] VFS: Disk quotas dquot_6.5.2
[    0.451282] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.451906] fuse init (API version 7.12)
[    0.452017] msgmni has been set to 1731
[    0.452258] alg: No test for stdrng (krng)
[    0.452278] io scheduler noop registered
[    0.452283] io scheduler anticipatory registered
[    0.452286] io scheduler deadline registered
[    0.452339] io scheduler cfq registered (default)
[    0.452441] pci 0000:01:00.0: Boot video device
[    0.452549] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.452577] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.453038] ACPI: AC Adapter [AC] (on-line)
[    0.453147] input: Lid Switch as 
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.453480] ACPI: Lid Switch [LID]
[    0.453533] input: Power Button as 
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.453542] ACPI: Power Button [PBTN]
[    0.453589] input: Sleep Button as 
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.453596] ACPI: Sleep Button [SBTN]
[    0.453930] Marking TSC unstable due to TSC halts in idle
[    0.453967] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[    0.453999] processor LNXCPU:00: registered as cooling_device0
[    0.454012] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.455965] thermal LNXTHERM:01: registered as thermal_zone0
[    0.455965] ACPI: Thermal Zone [THM] (59 C)
[    0.457989] Switched to high resolution mode on CPU 0
[    0.476288] isapnp: Scanning for PnP cards...
[    0.791222] ACPI: Battery Slot [BAT0] (battery present)
[    0.834704] isapnp: No Plug & Play device found
[    0.835895] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.837201] brd: module loaded
[    0.837664] loop: module loaded
[    0.837778] input: Macintosh mouse button emulation as 
/devices/virtual/input/input3
[    0.837914] ata_piix 0000:00:1f.1: version 2.13
[    0.837931] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.837944] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) 
-> IRQ 16
[    0.838009] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.838151] scsi0 : ata_piix
[    0.838281] scsi1 : ata_piix
[    0.838443] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 
irq 14
[    0.838450] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 
irq 15
[    0.839294] Fixed MDIO Bus: probed
[    0.839343] PPP generic driver version 2.4.2
[    0.839470] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.839502]   alloc irq_desc for 23 on node -1
[    0.839505]   alloc kstat_irqs on node -1
[    0.839513] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) 
-> IRQ 23
[    0.839538] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.839542] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.839606] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned 
bus number 1
[    0.843535] ehci_hcd 0000:00:1d.7: debug port 1
[    0.843545] ehci_hcd 0000:00:1d.7: cache line size of 128 is not 
supported
[    0.843851] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4fffc00
[    0.856020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.856130] usb usb1: configuration #1 chosen from 1 choice
[    0.856170] hub 1-0:1.0: USB hub found
[    0.856183] hub 1-0:1.0: 6 ports detected
[    0.856264] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.856291] uhci_hcd: USB Universal Host Controller Interface driver
[    0.856351] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) 
-> IRQ 16
[    0.856363] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.856367] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.856421] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned 
bus number 2
[    0.856456] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[    0.856559] usb usb2: configuration #1 chosen from 1 choice
[    0.856593] hub 2-0:1.0: USB hub found
[    0.856604] hub 2-0:1.0: 2 ports detected
[    0.856656]   alloc irq_desc for 19 on node -1
[    0.856660]   alloc kstat_irqs on node -1
[    0.856667] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) 
-> IRQ 19
[    0.856676] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.856679] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.856726] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned 
bus number 3
[    0.856757] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bf40
[    0.856847] usb usb3: configuration #1 chosen from 1 choice
[    0.856879] hub 3-0:1.0: USB hub found
[    0.856892] hub 3-0:1.0: 2 ports detected
[    0.856940]   alloc irq_desc for 18 on node -1
[    0.856943]   alloc kstat_irqs on node -1
[    0.856947] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) 
-> IRQ 18
[    0.856957] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.856960] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.856995] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned 
bus number 4
[    0.857026] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf20
[    0.857115] usb usb4: configuration #1 chosen from 1 choice
[    0.857147] hub 4-0:1.0: USB hub found
[    0.857160] hub 4-0:1.0: 2 ports detected
[    0.857281] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 
0x60,0x64 irq 1,12
[    0.857421] i8042.c: Warning: Keylock active.
[    0.859918] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.859928] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.860000] mice: PS/2 mouse device common for all mice
[    0.860186] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.860210] rtc0: alarms up to one day, 114 bytes nvram
[    0.860339] device-mapper: uevent: version 1.0.3
[    0.860467] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) 
initialised: dm-devel at redhat.com
[    0.860564] device-mapper: multipath: version 1.1.0 loaded
[    0.860570] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.860726] EISA: Probing bus 0 at eisa.0
[    0.860735] Cannot allocate resource for EISA slot 1
[    0.860754] EISA: Detected 0 cards.
[    0.860870] cpuidle: using governor ladder
[    0.860947] cpuidle: using governor menu
[    0.861545] TCP cubic registered
[    0.861676] NET: Registered protocol family 10
[    0.862153] lo: Disabled Privacy Extensions
[    0.862478] NET: Registered protocol family 17
[    0.862506] Bluetooth: L2CAP ver 2.13
[    0.862510] Bluetooth: L2CAP socket layer initialized
[    0.862515] Bluetooth: SCO (Voice Link) ver 0.6
[    0.862518] Bluetooth: SCO socket layer initialized
[    0.862587] Bluetooth: RFCOMM TTY layer initialized
[    0.862593] Bluetooth: RFCOMM socket layer initialized
[    0.862597] Bluetooth: RFCOMM ver 1.11
[    0.890306] Using IPI No-Shortcut mode
[    0.890411] PM: Resume from disk failed.
[    0.890427] registered taskstats version 1
[    0.890553]   Magic number: 14:603:849
[    0.890646] rtc_cmos 00:06: setting system clock to 2010-02-11 
19:48:16 UTC (1265917696)
[    0.890654] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.890658] EDD information not available.
[    0.890908] input: AT Translated Set 2 keyboard as 
/devices/platform/i8042/serio0/input/input4
[    1.004576] ata2.00: ATA-6: FUJITSU MHS2060AT, 8105, max UDMA/100
[    1.004584] ata2.00: 117210240 sectors, multi 8: LBA48
[    1.020416] ata1.00: ATAPI: _NEC DVD+RW ND-6100A, 104D, max UDMA/33
[    1.020788] ata2.00: configured for UDMA/100
[    1.068200] ata1.00: configured for UDMA/33
[    1.120656] scsi 0:0:0:0: CD-ROM            _NEC     DVD+RW ND-6100A 
  104D PQ: 0 ANSI: 5
[    1.227089] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.227098] Uniform CD-ROM driver Revision: 3.20
[    1.227218] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.227287] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.227396] scsi 1:0:0:0: Direct-Access     ATA      FUJITSU MHS2060A 
8105 PQ: 0 ANSI: 5
[    1.227521] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.227567] sd 1:0:0:0: [sda] 117210240 512-byte logical blocks: 
(60.0 GB/55.8 GiB)
[    1.227625] sd 1:0:0:0: [sda] Write Protect is off
[    1.227630] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.227657] sd 1:0:0:0: [sda] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA
[    1.227800]  sda: sda1 sda2 sda3
[    1.279588] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.279614] Freeing unused kernel memory: 540k freed
[    1.280340] Write protecting the kernel text: 4568k
[    1.280371] Write protecting the kernel read-only data: 1836k
[    1.416065] usb 2-1: new full speed USB device using uhci_hcd and 
address 2
[    1.485011] Linux agpgart interface v0.103
[    1.488551] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[    1.570793] ohci1394 0000:02:04.1: PCI INT A -> GSI 16 (level, low) 
-> IRQ 16
[    1.604862] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[    1.605499] usb 2-1: configuration #1 chosen from 1 choice
[    1.608467] hub 2-1:1.0: USB hub found
[    1.610844] hub 2-1:1.0: 3 ports detected
[    1.624102] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] 
MMIO=[faffc800-faffcfff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    1.657725]   alloc irq_desc for 17 on node -1
[    1.657730]   alloc kstat_irqs on node -1
[    1.657739] b44 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.662095] input: Video Bus as 
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1b/device:1c/input/input5
[    1.662167] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    1.732118] ssb: Sonics Silicon Backplane found on PCI device 
0000:02:01.0
[    1.732157] b44.c:v2.0
[    1.752808] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 
00:0f:1f:14:ee:ff
[    1.941344] usb 2-1.3: new full speed USB device using uhci_hcd and 
address 3
[    2.082425] usb 2-1.3: configuration #1 chosen from 1 choice
[    2.094773] usbcore: registered new interface driver hiddev
[    2.099703] input: Mitsumi Electric Apple Extended USB Keyboard as 
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input6
[    2.099809] generic-usb 0003:05AC:020B.0001: input,hidraw0: USB HID 
v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on 
usb-0000:00:1d.0-1.3/input0
[    2.108408] input: Mitsumi Electric Apple Extended USB Keyboard as 
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input7
[    2.108519] generic-usb 0003:05AC:020B.0002: input,hidraw1: USB HID 
v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on 
usb-0000:00:1d.0-1.3/input1
[    2.108548] usbcore: registered new interface driver usbhid
[    2.108554] usbhid: v2.6:USB HID core driver
[    2.297276] usb 2-1.2: new low speed USB device using uhci_hcd and 
address 4
[    2.401757] vesafb: framebuffer at 0xd0000000, mapped to 0xf8180000, 
using 6144k, total 32768k
[    2.401771] vesafb: mode is 1024x768x32, linelength=4096, pages=1
[    2.401776] vesafb: protected mode interface info at c000:e290
[    2.401780] vesafb: pmi: set display start = c00ce2c6, set palette = 
c00ce330
[    2.401785] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 
3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[    2.401806] vesafb: scrolling: redraw
[    2.401813] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.401887] fb0: VESA VGA frame buffer device
[    2.409419] Console: switching to colour frame buffer device 128x48
[    2.488351] usb 2-1.2: configuration #1 chosen from 1 choice
[    2.504588] input: Kensington MIAB Optical  as 
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input8
[    2.505660] generic-usb 0003:047D:1012.0003: input,hidraw2: USB HID 
v1.00 Mouse [Kensington MIAB Optical ] on usb-0000:00:1d.0-1.2/input0
[    2.740450] xor: automatically using best checksumming function: pIII_sse
[    2.760009]    pIII_sse  :  3893.000 MB/sec
[    2.760012] xor: using function: pIII_sse (3893.000 MB/sec)
[    2.763777] device-mapper: dm-raid45: initialized v0.2594b
[    2.936175] ieee1394: Host added: ID:BUS[0-00:1023] 
GUID[4a4fc0001216f481]
[    8.219909] EXT3-fs: INFO: recovery required on readonly filesystem.
[    8.219915] EXT3-fs: write access will be enabled during recovery.
[    8.527455] kjournald starting.  Commit interval 5 seconds
[    8.527480] EXT3-fs: recovery complete.
[    8.533033] EXT3-fs: mounted filesystem with writeback data mode.
[   10.208519] type=1505 audit(1265917705.817:2): 
operation="profile_load" pid=441 name=/usr/share/gdm/guest-session/Xsession
[   10.248138] type=1505 audit(1265917705.857:3): 
operation="profile_load" pid=442 name=/sbin/dhclient3
[   10.248688] type=1505 audit(1265917705.857:4): 
operation="profile_load" pid=442 
name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   10.248988] type=1505 audit(1265917705.857:5): 
operation="profile_load" pid=442 
name=/usr/lib/connman/scripts/dhclient-script
[   10.318886] type=1505 audit(1265917705.925:6): 
operation="profile_load" pid=443 name=/usr/bin/evince
[   10.328435] type=1505 audit(1265917705.937:7): 
operation="profile_load" pid=443 name=/usr/bin/evince-previewer
[   10.334073] type=1505 audit(1265917705.941:8): 
operation="profile_load" pid=443 name=/usr/bin/evince-thumbnailer
[   10.415427] type=1505 audit(1265917706.024:9): 
operation="profile_load" pid=445 name=/usr/lib/cups/backend/cups-pdf
[   10.416096] type=1505 audit(1265917706.025:10): 
operation="profile_load" pid=445 name=/usr/sbin/cupsd
[   10.629430] type=1505 audit(1265917706.237:11): 
operation="profile_load" pid=446 name=/usr/sbin/ntpd
[   46.716173] udev: starting version 147
[   46.781168] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   46.825936] lp: driver loaded but no devices found
[   46.938838] yenta_cardbus 0000:02:04.0: CardBus bridge found [1028:015f]
[   46.938856] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC 
interrupts to PCI
[   46.938859] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[   46.938864] yenta_cardbus 0000:02:04.0: TI: mfunc 0x00001002, devctl 0x64
[   46.940195] lib80211: common routines for IEEE802.11 drivers
[   46.940198] lib80211_crypt: registered algorithm 'NULL'
[   47.076854] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   47.076859] ieee80211: Copyright (C) 2004-2005 Intel Corporation 
<jketreno at linux.intel.com>
[   47.083222] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 
1.2.2kmprq
[   47.083226] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   47.192802] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   47.192808] yenta_cardbus 0000:02:04.0: Socket status: 30000086
[   47.192813] pci_bus 0000:02: Raising subordinate bus# of parent bus 
(#02) from #02 to #06
[   47.192828] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O 
window: 0xd000 - 0xefff
[   47.192833] pcmcia_socket pcmcia_socket0: cs: IO port probe 
0xd000-0xefff: clean.
[   47.193292] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge 
Memory window: 0xf6000000 - 0xfbffffff
[   47.193296] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge 
Memory window: 0x40000000 - 0x43ffffff
[   47.193647] ipw2200 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> 
IRQ 18
[   47.193734] ipw2200: Detected Intel PRO/Wireless 2200BG Network 
Connection
[   47.193785] ipw2200 0000:02:02.0: firmware: requesting ipw2200-bss.fw
[   47.315868] nvidia: module license 'NVIDIA' taints kernel.
[   47.315873] Disabling lock debugging due to kernel taint
[   47.620536] intel_rng: FWH not detected
[   47.629031] dcdbas dcdbas: Dell Systems Management Base Driver 
(version 5.6.0-3.2)
[   47.629963] dell-wmi: No known WMI GUID found
[   47.713484] ip_tables: (C) 2000-2006 Netfilter Core Team
[   47.866532] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) 
-> IRQ 17
[   47.866571] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   47.867761]   alloc irq_desc for 20 on node -1
[   47.867766]   alloc kstat_irqs on node -1
[   47.867775] nvidia 0000:01:00.0: PCI INT A -> GSI 20 (level, low) -> 
IRQ 20
[   47.868177] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.20 
Thu Jun 25 19:23:24 PDT 2009
[   47.871402] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 
802.11a channels)
[   47.996432] pcmcia_socket pcmcia_socket0: cs: IO port probe 
0x100-0x3af: clean.
[   47.997345] pcmcia_socket pcmcia_socket0: cs: IO port probe 
0x3e0-0x4ff: clean.
[   47.997732] pcmcia_socket pcmcia_socket0: cs: IO port probe 
0x820-0x8ff: clean.
[   47.998058] pcmcia_socket pcmcia_socket0: cs: IO port probe 
0xc00-0xcf7: clean.
[   47.998533] pcmcia_socket pcmcia_socket0: cs: IO port probe 
0xa00-0xaff: clean.
[   48.084321] EXT3 FS on sda2, internal journal
[   48.454392] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   48.526427] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, 
caps: 0x804713/0x0
[   48.578478] input: SynPS/2 Synaptics TouchPad as 
/devices/platform/i8042/serio1/input/input9
[   48.628308] __ratelimit: 3 callbacks suppressed
[   48.628312] type=1505 audit(1265935744.237:13): 
operation="profile_replace" pid=983 
name=/usr/share/gdm/guest-session/Xsession
[   48.630885] type=1505 audit(1265935744.237:14): 
operation="profile_replace" pid=984 name=/sbin/dhclient3
[   48.631434] type=1505 audit(1265935744.237:15): 
operation="profile_replace" pid=984 
name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   48.631734] type=1505 audit(1265935744.237:16): 
operation="profile_replace" pid=984 
name=/usr/lib/connman/scripts/dhclient-script
[   48.640476] type=1505 audit(1265935744.249:17): 
operation="profile_replace" pid=985 name=/usr/bin/evince
[   48.650524] type=1505 audit(1265935744.257:18): 
operation="profile_replace" pid=985 name=/usr/bin/evince-previewer
[   48.656649] type=1505 audit(1265935744.265:19): 
operation="profile_replace" pid=985 name=/usr/bin/evince-thumbnailer
[   48.677022] type=1505 audit(1265935744.285:20): 
operation="profile_replace" pid=987 name=/usr/lib/cups/backend/cups-pdf
[   48.677670] type=1505 audit(1265935744.285:21): 
operation="profile_replace" pid=987 name=/usr/sbin/cupsd
[   48.716056] intel8x0_measure_ac97_clock: measured 55297 usecs (2664 
samples)
[   48.716061] intel8x0: clocking to 48000
[   48.845124] type=1505 audit(1265935744.453:22): 
operation="profile_replace" pid=988 name=/usr/sbin/ntpd
[   50.114788] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[   50.114805] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x 
mode
[   50.114837] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
[   51.599038] ppdev: user-space parallel port driver
[   58.892015] eth1: no IPv6 routers present
[  113.700034] Clocksource tsc unstable (delta = -214293656 ns)
[  134.861901] usb 2-1.1: new full speed USB device using uhci_hcd and 
address 5
[  134.965878] usb 2-1.1: not running at top speed; connect to a high 
speed hub
[  135.000099] usb 2-1.1: configuration #1 chosen from 1 choice
[  135.108850] Initializing USB Mass Storage driver...
[  135.110827] scsi2 : SCSI emulation for USB Mass Storage devices
[  135.111194] usbcore: registered new interface driver usb-storage
[  135.111202] USB Mass Storage support registered.
[  135.129338] usb-storage: device found at 5
[  135.129345] usb-storage: waiting for device to settle before scanning
[  140.130022] usb-storage: device scan complete
[  140.139203] scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 2.0 
1.00 PQ: 0 ANSI: 2
[  140.140128] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  140.162496] sd 2:0:0:0: [sdb] 1994752 512-byte logical blocks: (1.02 
GB/974 MiB)
[  140.167793] sd 2:0:0:0: [sdb] Write Protect is off
[  140.167803] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[  140.167809] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  140.187386] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  140.187401]  sdb: sdb1
[  140.303959] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  140.303972] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  143.995905] lib80211_crypt: registered algorithm 'TKIP'

-- 
--- Dave Woyciesjes
--- ICQ# 905818
--- AIM - woyciesjes
--- CompTIA A+ Certified IT Tech - http://certification.comptia.org/
--- HDI Certified Support Center Analyst - http://www.ThinkHDI.com/
             Registered Linux user number 464583
"From there to here,
 From here to there,
Funny things
are everywhere."
--- Dr. Seuss




More information about the ubuntu-users mailing list