Karmic: HDA-Intel not working
Ohad Asor
ohad at sw-experts.co.il
Thu Nov 5 01:38:25 UTC 2009
Hi All,
Karmic is totally unable to play any sound on my PC. With 9.04, everything
went well.
Here are dmesg and lspci.
I would deeply appreciate your help.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd at crested) (gcc version
4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009
(Ubuntu 2.6.31-14.48-generic)
[ 0.000000] Command line: root=/dev/mapper/isw_bahdiiijae_Volume07 ro
quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097000 (usable)
[ 0.000000] BIOS-e820: 0000000000097000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfa15000 (usable)
[ 0.000000] BIOS-e820: 00000000cfa15000 - 00000000cfa17000 (reserved)
[ 0.000000] BIOS-e820: 00000000cfa17000 - 00000000cfb09000 (usable)
[ 0.000000] BIOS-e820: 00000000cfb09000 - 00000000cfbea000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfbea000 - 00000000cfbf3000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfbf3000 - 00000000cfbf4000 (usable)
[ 0.000000] BIOS-e820: 00000000cfbf4000 - 00000000cfbff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfbff000 - 00000000cfc00000 (usable)
[ 0.000000] BIOS-e820: 00000000cfc00000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001ac000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x1ac000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0CFC00000 mask FFFC00000 uncachable
[ 0.000000] 4 base 100000000 mask F80000000 write-back
[ 0.000000] 5 base 180000000 mask FE0000000 write-back
[ 0.000000] 6 base 1A0000000 mask FF8000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000cfc00000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] e820 update range: 00000001a8000000 - 00000001ac000000
(usable) ==> (reserved)
[ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory,
losing 64MB of RAM.
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at
/build/buildd/linux-2.6.31/arch/x86/kernel/cpu/mtrr/cleanup.c:1091
mtrr_trim_uncached_memory+0x2a6/0x2d1()
[ 0.000000] Hardware name:
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.31-14-generic
#48-Ubuntu
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8105e788>] warn_slowpath_common+0x78/0xb0
[ 0.000000] [<ffffffff8105e7cf>] warn_slowpath_null+0xf/0x20
[ 0.000000] [<ffffffff81843505>] mtrr_trim_uncached_memory+0x2a6/0x2d1
[ 0.000000] [<ffffffff8183ecfa>] setup_arch+0x3d0/0x647
[ 0.000000] [<ffffffff81526b1d>] ? printk+0x3c/0x3f
[ 0.000000] [<ffffffff81839db3>] start_kernel+0xbe/0x35b
[ 0.000000] [<ffffffff8183959a>] x86_64_start_reservations+0x125/0x129
[ 0.000000] [<ffffffff81839698>] x86_64_start_kernel+0xfa/0x109
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000000] update e820 for mtrr
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000097000 (usable)
[ 0.000000] modified: 0000000000097000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfa15000 (usable)
[ 0.000000] modified: 00000000cfa15000 - 00000000cfa17000 (reserved)
[ 0.000000] modified: 00000000cfa17000 - 00000000cfb09000 (usable)
[ 0.000000] modified: 00000000cfb09000 - 00000000cfbea000 (ACPI NVS)
[ 0.000000] modified: 00000000cfbea000 - 00000000cfbf3000 (ACPI data)
[ 0.000000] modified: 00000000cfbf3000 - 00000000cfbf4000 (usable)
[ 0.000000] modified: 00000000cfbf4000 - 00000000cfbff000 (ACPI data)
[ 0.000000] modified: 00000000cfbff000 - 00000000cfc00000 (usable)
[ 0.000000] modified: 00000000cfc00000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f8000000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001a8000000 (usable)
[ 0.000000] modified: 00000001a8000000 - 00000001ac000000 (reserved)
[ 0.000000] last_pfn = 0x1a8000 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0xcfc00 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000
(usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000097000 (usable)
[ 0.000000] modified: 0000000000097000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfa15000 (usable)
[ 0.000000] modified: 00000000cfa15000 - 00000000cfa17000 (reserved)
[ 0.000000] modified: 00000000cfa17000 - 00000000cfb09000 (usable)
[ 0.000000] modified: 00000000cfb09000 - 00000000cfbea000 (ACPI NVS)
[ 0.000000] modified: 00000000cfbea000 - 00000000cfbf3000 (ACPI data)
[ 0.000000] modified: 00000000cfbf3000 - 00000000cfbf4000 (usable)
[ 0.000000] modified: 00000000cfbf4000 - 00000000cfbff000 (ACPI data)
[ 0.000000] modified: 00000000cfbff000 - 00000000cfc00000 (usable)
[ 0.000000] modified: 00000000cfc00000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f8000000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001a8000000 (usable)
[ 0.000000] modified: 00000001a8000000 - 00000001ac000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfc00000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 00cfc00000 page 2M
[ 0.000000] kernel direct mapping tables up to cfc00000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001a8000000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0100000000 - 01a8000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1a8000000 @ b000-13000
[ 0.000000] RAMDISK: 37833000 - 37fef76a
[ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
[ 0.000000] ACPI: RSDT 00000000cfbfd038 0005C (v01 INTEL DP35DP
00000146 01000013)
[ 0.000000] ACPI: FACP 00000000cfbfc000 00074 (v01 INTEL DP35DP
00000146 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000cfbf8000 03D05 (v01 INTEL DP35DP
00000146 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000cfba3000 00040
[ 0.000000] ACPI: APIC 00000000cfbf7000 00078 (v01 INTEL DP35DP
00000146 MSFT 01000013)
[ 0.000000] ACPI: WDDT 00000000cfbf6000 00040 (v01 INTEL DP35DP
00000146 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000cfbf5000 0003C (v01 INTEL DP35DP
00000146 MSFT 01000013)
[ 0.000000] ACPI: ASF! 00000000cfbf4000 000A6 (v32 INTEL DP35DP
00000146 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfbf2000 00204 (v01 INTEL CpuPm
00000146 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfbf1000 00175 (v01 INTEL Cpu0Ist
00000146 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfbf0000 00175 (v01 INTEL Cpu1Ist
00000146 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfbef000 00175 (v01 INTEL Cpu2Ist
00000146 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfbee000 00175 (v01 INTEL Cpu3Ist
00000146 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfbed000 000DD (v01 INTEL Cpu0Cst
00000146 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfbec000 000DD (v01 INTEL Cpu1Cst
00000146 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfbeb000 000DD (v01 INTEL Cpu2Cst
00000146 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfbea000 000DD (v01 INTEL Cpu3Cst
00000146 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001a8000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001a8000000
[ 0.000000] NODE_DATA [000000000000e000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000047fff] pages 35
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01a8000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00019e2ccc] TEXT DATA BSS ==>
[0001000000 - 00019e2ccc]
[ 0.000000] #3 [0037833000 - 0037fef76a] RAMDISK ==>
[0037833000 - 0037fef76a]
[ 0.000000] #4 [0000097000 - 0000100000] BIOS reserved ==>
[0000097000 - 0000100000]
[ 0.000000] #5 [00019e3000 - 00019e315e] BRK ==>
[00019e3000 - 00019e315e]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==>
[0000008000 - 000000b000]
[ 0.000000] #7 [000000b000 - 000000e000] PGTABLE ==>
[000000b000 - 000000e000]
[ 0.000000] found SMP MP-table at [ffff8800000fe200] fe200
[ 0.000000] [ffffea0000000000-ffffea0005dfffff] PMD ->
[ffff880028600000-ffff88002d9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001a8000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x00000097
[ 0.000000] 0: 0x00000100 -> 0x000cfa15
[ 0.000000] 0: 0x000cfa17 -> 0x000cfb09
[ 0.000000] 0: 0x000cfbf3 -> 0x000cfbf4
[ 0.000000] 0: 0x000cfbff -> 0x000cfc00
[ 0.000000] 0: 0x00100000 -> 0x001a8000
[ 0.000000] On node 0 totalpages: 1538715
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 114 pages reserved
[ 0.000000] DMA zone: 3816 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 832321 pages, LIFO batch:31
[ 0.000000] Normal zone: 9408 pages used for memmap
[ 0.000000] Normal zone: 678720 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 -
0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000097000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfa15000 -
00000000cfa17000
[ 0.000000] PM: Registered nosave memory: 00000000cfb09000 -
00000000cfbea000
[ 0.000000] PM: Registered nosave memory: 00000000cfbea000 -
00000000cfbf3000
[ 0.000000] PM: Registered nosave memory: 00000000cfbf4000 -
00000000cfbff000
[ 0.000000] PM: Registered nosave memory: 00000000cfc00000 -
00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 -
00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap:
d0000000:20000000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages at ffff880028034000, static data
90720 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1514857
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/isw_bahdiiijae_Volume07
ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 5984032k/6946816k available (5313k kernel code,
791956k absent, 170828k reserved, 3011k data, 660k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2400.048 MHz processor.
[ 0.000714] Console: colour VGA+ 80x25
[ 0.000717] console [tty0] enabled
[ 0.010000] allocated 61603840 bytes of page_cgroup
[ 0.010000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.010010] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4800.09 BogoMIPS (lpj=24000480)
[ 0.010041] Security Framework initialized
[ 0.010062] AppArmor: AppArmor initialized
[ 0.010749] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.015811] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.018194] Mount-cache hash table entries: 256
[ 0.018353] Initializing cgroup subsys ns
[ 0.018359] Initializing cgroup subsys cpuacct
[ 0.018363] Initializing cgroup subsys memory
[ 0.018370] Initializing cgroup subsys freezer
[ 0.018372] Initializing cgroup subsys net_cls
[ 0.018384] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.018386] CPU: L2 cache: 4096K
[ 0.018390] CPU 0/0x0 -> Node 0
[ 0.018392] CPU: Physical Processor ID: 0
[ 0.018393] CPU: Processor Core ID: 0
[ 0.018397] mce: CPU supports 6 MCE banks
[ 0.018404] CPU0: Thermal monitoring enabled (TM2)
[ 0.018407] using mwait in idle threads.
[ 0.018408] Performance Counters: Core2 events, Intel PMU driver.
[ 0.018414] ... version: 2
[ 0.018416] ... bit width: 40
[ 0.018417] ... generic counters: 2
[ 0.018418] ... value mask: 000000ffffffffff
[ 0.018420] ... max period: 000000007fffffff
[ 0.018421] ... fixed-purpose counters: 3
[ 0.018423] ... counter mask: 0000000700000003
[ 0.020014] ACPI: Core revision 20090521
[ 0.027388] Setting APIC routing to flat
[ 0.027693] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.128438] CPU0: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz
stepping 07
[ 0.130000] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.010000] Initializing CPU#1
[ 0.010000] Calibrating delay using timer specific routine.. 4800.31
BogoMIPS (lpj=24001569)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 4096K
[ 0.010000] CPU 1/0x2 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 2
[ 0.010000] mce: CPU supports 6 MCE banks
[ 0.010000] CPU1: Thermal monitoring enabled (TM2)
[ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.281380] CPU1: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz
stepping 07
[ 0.281387] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.290087] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.010000] Initializing CPU#2
[ 0.010000] Calibrating delay using timer specific routine.. 4800.33
BogoMIPS (lpj=24001653)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 4096K
[ 0.010000] CPU 2/0x1 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 1
[ 0.010000] mce: CPU supports 6 MCE banks
[ 0.010000] CPU2: Thermal monitoring enabled (TM2)
[ 0.010000] x86 PAT enabled: cpu 2, old 0x7040600070406, new
0x7010600070106
[ 0.451407] CPU2: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz
stepping 07
[ 0.451415] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.460108] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.010000] Initializing CPU#3
[ 0.010000] Calibrating delay using timer specific routine.. 4800.31
BogoMIPS (lpj=24001551)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 4096K
[ 0.010000] CPU 3/0x3 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 3
[ 0.010000] mce: CPU supports 6 MCE banks
[ 0.010000] CPU3: Thermal monitoring enabled (TM2)
[ 0.010000] x86 PAT enabled: cpu 3, old 0x7040600070406, new
0x7010600070106
[ 0.621357] CPU3: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz
stepping 07
[ 0.621364] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.630010] Brought up 4 CPUs
[ 0.630013] Total of 4 processors activated (19201.05 BogoMIPS).
[ 0.630074] CPU0 attaching sched-domain:
[ 0.630076] domain 0: span 0,2 level MC
[ 0.630078] groups: 0 2
[ 0.630082] domain 1: span 0-3 level CPU
[ 0.630084] groups: 0,2 1,3
[ 0.630089] CPU1 attaching sched-domain:
[ 0.630090] domain 0: span 1,3 level MC
[ 0.630092] groups: 1 3
[ 0.630095] domain 1: span 0-3 level CPU
[ 0.630097] groups: 1,3 0,2
[ 0.630102] CPU2 attaching sched-domain:
[ 0.630103] domain 0: span 0,2 level MC
[ 0.630105] groups: 2 0
[ 0.630108] domain 1: span 0-3 level CPU
[ 0.630110] groups: 0,2 1,3
[ 0.630114] CPU3 attaching sched-domain:
[ 0.630116] domain 0: span 1,3 level MC
[ 0.630118] groups: 3 1
[ 0.630121] domain 1: span 0-3 level CPU
[ 0.630123] groups: 1,3 0,2
[ 0.630234] Booting paravirtualized kernel on bare hardware
[ 0.630234] regulator: core version 0.5
[ 0.630234] Time: 3:20:22 Date: 11/05/09
[ 0.630234] NET: Registered protocol family 16
[ 0.630234] ACPI: bus type pci registered
[ 0.630308] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 -
127
[ 0.630311] PCI: MCFG area at f0000000 reserved in E820
[ 0.634677] PCI: Using MMCONFIG at f0000000 - f7ffffff
[ 0.634678] PCI: Using configuration type 1 for base access
[ 0.635438] bio: create slab <bio-0> at 0
[ 0.635438] ACPI: EC: Look up EC in DSDT
[ 0.641162] ACPI: Interpreter enabled
[ 0.641173] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.641199] ACPI: Using IOAPIC for interrupt routing
[ 0.644811] ACPI: No dock devices found.
[ 0.645655] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.645744] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.645748] pci 0000:00:01.0: PME# disabled
[ 0.645775] pci 0000:00:03.0: reg 10 64bit mmio: [0xe0326100-0xe032610f]
[ 0.645800] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.645803] pci 0000:00:03.0: PME# disabled
[ 0.645863] pci 0000:00:19.0: reg 10 32bit mmio: [0xe0300000-0xe031ffff]
[ 0.645869] pci 0000:00:19.0: reg 14 32bit mmio: [0xe0324000-0xe0324fff]
[ 0.645874] pci 0000:00:19.0: reg 18 io port: [0x3400-0x341f]
[ 0.645909] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.645912] pci 0000:00:19.0: PME# disabled
[ 0.645956] pci 0000:00:1a.0: reg 20 io port: [0x30e0-0x30ff]
[ 0.646018] pci 0000:00:1a.1: reg 20 io port: [0x30c0-0x30df]
[ 0.646081] pci 0000:00:1a.2: reg 20 io port: [0x30a0-0x30bf]
[ 0.646146] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe0325c00-0xe0325fff]
[ 0.646195] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.646199] pci 0000:00:1a.7: PME# disabled
[ 0.646235] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe0320000-0xe0323fff]
[ 0.646272] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.646275] pci 0000:00:1b.0: PME# disabled
[ 0.646326] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.646329] pci 0000:00:1c.0: PME# disabled
[ 0.646381] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.646384] pci 0000:00:1c.1: PME# disabled
[ 0.646436] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.646439] pci 0000:00:1c.2: PME# disabled
[ 0.646491] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.646494] pci 0000:00:1c.3: PME# disabled
[ 0.646546] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.646550] pci 0000:00:1c.4: PME# disabled
[ 0.646599] pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f]
[ 0.646660] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f]
[ 0.646722] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
[ 0.646787] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0325800-0xe0325bff]
[ 0.646837] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.646841] pci 0000:00:1d.7: PME# disabled
[ 0.646951] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.646957] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6
ACPI/GPIO/TCO
[ 0.646960] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6
GPIO
[ 0.646963] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680
(mask 007f)
[ 0.646966] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810
(mask 007f)
[ 0.647024] pci 0000:00:1f.2: reg 10 io port: [0x3428-0x342f]
[ 0.647029] pci 0000:00:1f.2: reg 14 io port: [0x3434-0x3437]
[ 0.647034] pci 0000:00:1f.2: reg 18 io port: [0x3420-0x3427]
[ 0.647039] pci 0000:00:1f.2: reg 1c io port: [0x3430-0x3433]
[ 0.647044] pci 0000:00:1f.2: reg 20 io port: [0x3020-0x303f]
[ 0.647049] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe0325000-0xe03257ff]
[ 0.647077] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.647080] pci 0000:00:1f.2: PME# disabled
[ 0.647105] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe0326000-0xe03260ff]
[ 0.647117] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
[ 0.647162] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.647170] pci 0000:01:00.0: reg 18 64bit mmio: [0xe0200000-0xe020ffff]
[ 0.647175] pci 0000:01:00.0: reg 20 io port: [0x2000-0x20ff]
[ 0.647183] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[ 0.647199] pci 0000:01:00.0: supports D1 D2
[ 0.647228] pci 0000:01:00.1: reg 10 64bit mmio: [0xe0210000-0xe0213fff]
[ 0.647260] pci 0000:01:00.1: supports D1 D2
[ 0.647303] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.647305] pci 0000:00:01.0: bridge 32bit mmio: [0xe0200000-0xe02fffff]
[ 0.647309] pci 0000:00:01.0: bridge 64bit mmio pref:
[0xd0000000-0xdfffffff]
[ 0.647391] pci 0000:03:00.0: reg 10 io port: [0x1018-0x101f]
[ 0.647398] pci 0000:03:00.0: reg 14 io port: [0x1024-0x1027]
[ 0.647405] pci 0000:03:00.0: reg 18 io port: [0x1010-0x1017]
[ 0.647413] pci 0000:03:00.0: reg 1c io port: [0x1020-0x1023]
[ 0.647420] pci 0000:03:00.0: reg 20 io port: [0x1000-0x100f]
[ 0.647427] pci 0000:03:00.0: reg 24 32bit mmio: [0xe0100000-0xe01001ff]
[ 0.647465] pci 0000:03:00.0: supports D1
[ 0.647466] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.647471] pci 0000:03:00.0: PME# disabled
[ 0.647515] pci 0000:00:1c.1: bridge io port: [0x1000-0x1fff]
[ 0.647518] pci 0000:00:1c.1: bridge 32bit mmio: [0xe0100000-0xe01fffff]
[ 0.647674] pci 0000:07:01.0: reg 10 32bit mmio: [0xe0000000-0xe000ffff]
[ 0.647748] pci 0000:07:03.0: reg 10 32bit mmio: [0xe0014000-0xe00147ff]
[ 0.647755] pci 0000:07:03.0: reg 14 32bit mmio: [0xe0010000-0xe0013fff]
[ 0.647795] pci 0000:07:03.0: supports D1 D2
[ 0.647796] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.647800] pci 0000:07:03.0: PME# disabled
[ 0.647840] pci 0000:00:1e.0: transparent bridge
[ 0.647845] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xe00fffff]
[ 0.647875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.648064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.648198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.648251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.648303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.648356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.648407] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.652826] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.652915] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.653001] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.653087] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.653172] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.653257] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.653342] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.653427] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.653569] SCSI subsystem initialized
[ 0.653623] libata version 3.00 loaded.
[ 0.653623] usbcore: registered new interface driver usbfs
[ 0.653623] usbcore: registered new interface driver hub
[ 0.653623] usbcore: registered new device driver usb
[ 0.653623] ACPI: WMI: Mapper loaded
[ 0.653623] PCI: Using ACPI for IRQ routing
[ 0.680008] Bluetooth: Core ver 2.15
[ 0.680029] NET: Registered protocol family 31
[ 0.680029] Bluetooth: HCI device and connection manager initialized
[ 0.680029] Bluetooth: HCI socket layer initialized
[ 0.680029] NetLabel: Initializing
[ 0.680029] NetLabel: domain hash size = 128
[ 0.680029] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.680043] NetLabel: unlabeled traffic allowed by default
[ 0.680206] hpet clockevent registered
[ 0.680209] HPET: 4 timers in total, 0 timers will be used for per-cpu
timer
[ 0.680223] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.680228] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.730092] pnp: PnP ACPI init
[ 0.730106] ACPI: bus type pnp registered
[ 0.732223] pnp: PnP ACPI: found 10 devices
[ 0.732225] ACPI: ACPI bus type pnp unregistered
[ 0.732234] system 00:01: iomem range 0xf0000000-0xf7ffffff has been
reserved
[ 0.732236] system 00:01: iomem range 0xfeb00000-0xfeb03fff has been
reserved
[ 0.732239] system 00:01: iomem range 0xfed13000-0xfed13fff has been
reserved
[ 0.732241] system 00:01: iomem range 0xfed14000-0xfed17fff has been
reserved
[ 0.732244] system 00:01: iomem range 0xfed18000-0xfed18fff has been
reserved
[ 0.732246] system 00:01: iomem range 0xfed19000-0xfed19fff has been
reserved
[ 0.732249] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.732251] system 00:01: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.732253] system 00:01: iomem range 0xfed45000-0xfed99fff has been
reserved
[ 0.732256] system 00:01: iomem range 0xc0000-0xdffff has been reserved
[ 0.732258] system 00:01: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.732261] system 00:01: iomem range 0xffc00000-0xffffffff could not be
reserved
[ 0.732267] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.732269] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.732271] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.736920] AppArmor: AppArmor Filesystem Enabled
[ 0.736936] pci 0000:01:00.0: BAR 6: no parent found for of device
[0xfffe0000-0xffffffff]
[ 0.736981] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.736983] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.736987] pci 0000:00:01.0: MEM window: 0xe0200000-0xe02fffff
[ 0.736990] pci 0000:00:01.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.736994] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.736995] pci 0000:00:1c.0: IO window: disabled
[ 0.736999] pci 0000:00:1c.0: MEM window: disabled
[ 0.737002] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.737006] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.737008] pci 0000:00:1c.1: IO window: 0x1000-0x1fff
[ 0.737012] pci 0000:00:1c.1: MEM window: 0xe0100000-0xe01fffff
[ 0.737016] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.737019] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.737021] pci 0000:00:1c.2: IO window: disabled
[ 0.737024] pci 0000:00:1c.2: MEM window: disabled
[ 0.737028] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.737031] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.737032] pci 0000:00:1c.3: IO window: disabled
[ 0.737036] pci 0000:00:1c.3: MEM window: disabled
[ 0.737039] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.737043] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[ 0.737044] pci 0000:00:1c.4: IO window: disabled
[ 0.737048] pci 0000:00:1c.4: MEM window: disabled
[ 0.737051] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.737055] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 0.737056] pci 0000:00:1e.0: IO window: disabled
[ 0.737060] pci 0000:00:1e.0: MEM window: 0xe0000000-0xe00fffff
[ 0.737064] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.737072] alloc irq_desc for 16 on node 0
[ 0.737073] alloc kstat_irqs on node 0
[ 0.737078] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.737081] pci 0000:00:01.0: setting latency timer to 64
[ 0.737086] alloc irq_desc for 17 on node 0
[ 0.737088] alloc kstat_irqs on node 0
[ 0.737091] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.737095] pci 0000:00:1c.0: setting latency timer to 64
[ 0.737100] alloc irq_desc for 20 on node 0
[ 0.737102] alloc kstat_irqs on node 0
[ 0.737104] pci 0000:00:1c.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.737108] pci 0000:00:1c.1: setting latency timer to 64
[ 0.737113] alloc irq_desc for 18 on node 0
[ 0.737115] alloc kstat_irqs on node 0
[ 0.737117] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.737122] pci 0000:00:1c.2: setting latency timer to 64
[ 0.737127] alloc irq_desc for 19 on node 0
[ 0.737128] alloc kstat_irqs on node 0
[ 0.737131] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.737135] pci 0000:00:1c.3: setting latency timer to 64
[ 0.737141] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.737145] pci 0000:00:1c.4: setting latency timer to 64
[ 0.737151] pci 0000:00:1e.0: setting latency timer to 64
[ 0.737154] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.737156] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
[ 0.737158] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.737160] pci_bus 0000:01: resource 1 mem: [0xe0200000-0xe02fffff]
[ 0.737162] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.737165] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.737167] pci_bus 0000:03: resource 1 mem: [0xe0100000-0xe01fffff]
[ 0.737169] pci_bus 0000:07: resource 1 mem: [0xe0000000-0xe00fffff]
[ 0.737171] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
[ 0.737173] pci_bus 0000:07: resource 4 mem:
[0x000000-0xffffffffffffffff]
[ 0.737201] NET: Registered protocol family 2
[ 0.737428] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.738708] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.743210] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.743817] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.743820] TCP reno registered
[ 0.743933] NET: Registered protocol family 1
[ 0.743996] Trying to unpack rootfs image as initramfs...
[ 0.903407] Freeing initrd memory: 7921k freed
[ 0.906608] Scanning for low memory corruption every 60 seconds
[ 0.906750] audit: initializing netlink socket (disabled)
[ 0.906767] type=2000 audit(1257391221.900:1): initialized
[ 0.915502] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.916821] VFS: Disk quotas dquot_6.5.2
[ 0.916887] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.917431] fuse init (API version 7.12)
[ 0.917511] msgmni has been set to 11703
[ 0.917851] alg: No test for stdrng (krng)
[ 0.917865] io scheduler noop registered
[ 0.917868] io scheduler anticipatory registered
[ 0.917871] io scheduler deadline registered
[ 0.917919] io scheduler cfq registered (default)
[ 0.918287] pci 0000:01:00.0: Boot video device
[ 0.918467] alloc irq_desc for 24 on node 0
[ 0.918469] alloc kstat_irqs on node 0
[ 0.918477] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.918482] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.918637] alloc irq_desc for 25 on node 0
[ 0.918638] alloc kstat_irqs on node 0
[ 0.918644] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.918651] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.918822] alloc irq_desc for 26 on node 0
[ 0.918824] alloc kstat_irqs on node 0
[ 0.918830] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.918837] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.919012] alloc irq_desc for 27 on node 0
[ 0.919013] alloc kstat_irqs on node 0
[ 0.919019] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.919026] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.919195] alloc irq_desc for 28 on node 0
[ 0.919197] alloc kstat_irqs on node 0
[ 0.919203] pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 0.919210] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.919383] alloc irq_desc for 29 on node 0
[ 0.919384] alloc kstat_irqs on node 0
[ 0.919390] pcieport-driver 0000:00:1c.4: irq 29 for MSI/MSI-X
[ 0.919397] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.919479] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.919580] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.919684] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.919687] ACPI: Power Button [PWRF]
[ 0.919734] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.919739] ACPI: Sleep Button [SLPB]
[ 0.920090] Monitor-Mwait will be used to enter C-1 state
[ 0.920135] processor LNXCPU:00: registered as cooling_device0
[ 0.920138] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.920383] processor LNXCPU:01: registered as cooling_device1
[ 0.920386] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 0.920696] processor LNXCPU:02: registered as cooling_device2
[ 0.920704] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.920985] processor LNXCPU:03: registered as cooling_device3
[ 0.920990] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 0.923040] Linux agpgart interface v0.103
[ 0.923043] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.923132] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.923205] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 0.923443] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.924261] brd: module loaded
[ 0.924629] loop: module loaded
[ 0.924690] input: Macintosh mouse button emulation as
/devices/virtual/input/input2
[ 0.924809] ahci 0000:00:1f.2: version 3.0
[ 0.924822] alloc irq_desc for 21 on node 0
[ 0.924824] alloc kstat_irqs on node 0
[ 0.924828] ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.924878] alloc irq_desc for 30 on node 0
[ 0.924879] alloc kstat_irqs on node 0
[ 0.924886] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[ 0.924950] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x3f impl RAID mode
[ 0.924953] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum
part ems
[ 0.924956] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.020859] scsi0 : ahci
[ 1.020967] scsi1 : ahci
[ 1.021071] scsi2 : ahci
[ 1.021142] scsi3 : ahci
[ 1.021222] scsi4 : ahci
[ 1.021312] scsi5 : ahci
[ 1.021416] ata1: SATA max UDMA/133 abar m2048 at 0xe0325000 port 0xe0325100
irq 30
[ 1.021419] ata2: SATA max UDMA/133 abar m2048 at 0xe0325000 port 0xe0325180
irq 30
[ 1.021421] ata3: SATA max UDMA/133 abar m2048 at 0xe0325000 port 0xe0325200
irq 30
[ 1.021424] ata4: SATA max UDMA/133 abar m2048 at 0xe0325000 port 0xe0325280
irq 30
[ 1.021426] ata5: SATA max UDMA/133 abar m2048 at 0xe0325000 port 0xe0325300
irq 30
[ 1.021428] ata6: SATA max UDMA/133 abar m2048 at 0xe0325000 port 0xe0325380
irq 30
[ 1.021906] pata_marvell 0000:03:00.0: PCI INT A -> GSI 17 (level, low)
-> IRQ 17
[ 1.021937] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 1.022027] scsi6 : pata_marvell
[ 1.022108] scsi7 : pata_marvell
[ 1.022147] ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000
irq 17
[ 1.022149] ata8: DUMMY
[ 1.022617] Fixed MDIO Bus: probed
[ 1.022646] PPP generic driver version 2.4.2
[ 1.022715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.022788] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 17 (level, low) ->
IRQ 17
[ 1.022805] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.022810] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.022871] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 1.026759] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.026764] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.026768] ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe0325c00
[ 1.040969] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.041061] usb usb1: configuration #1 chosen from 1 choice
[ 1.041096] hub 1-0:1.0: USB hub found
[ 1.041107] hub 1-0:1.0: 6 ports detected
[ 1.041252] alloc irq_desc for 23 on node 0
[ 1.041255] alloc kstat_irqs on node 0
[ 1.041270] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 1.041279] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.041281] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.041309] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 1.045192] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.045197] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.045207] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0325800
[ 1.061054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.061126] usb usb2: configuration #1 chosen from 1 choice
[ 1.061159] hub 2-0:1.0: USB hub found
[ 1.061166] hub 2-0:1.0: 6 ports detected
[ 1.061240] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.061290] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.061393] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 1.061398] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.061401] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.061441] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 1.061467] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000030e0
[ 1.061530] usb usb3: configuration #1 chosen from 1 choice
[ 1.061553] hub 3-0:1.0: USB hub found
[ 1.061559] hub 3-0:1.0: 2 ports detected
[ 1.061660] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) ->
IRQ 21
[ 1.061667] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.061680] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.061707] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 1.061732] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030c0
[ 1.061795] usb usb4: configuration #1 chosen from 1 choice
[ 1.061816] hub 4-0:1.0: USB hub found
[ 1.061821] hub 4-0:1.0: 2 ports detected
[ 1.061923] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) ->
IRQ 17
[ 1.061930] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.061944] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.061970] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 5
[ 1.061992] uhci_hcd 0000:00:1a.2: irq 17, io base 0x000030a0
[ 1.062055] usb usb5: configuration #1 chosen from 1 choice
[ 1.062076] hub 5-0:1.0: USB hub found
[ 1.062081] hub 5-0:1.0: 2 ports detected
[ 1.062186] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 1.062203] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.062205] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.062233] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 6
[ 1.062253] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 1.062317] usb usb6: configuration #1 chosen from 1 choice
[ 1.062338] hub 6-0:1.0: USB hub found
[ 1.062343] hub 6-0:1.0: 2 ports detected
[ 1.062445] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 1.062452] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.062466] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.062496] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 7
[ 1.062522] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 1.062582] usb usb7: configuration #1 chosen from 1 choice
[ 1.062605] hub 7-0:1.0: USB hub found
[ 1.062610] hub 7-0:1.0: 2 ports detected
[ 1.062712] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 1.062719] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.062732] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.062769] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 8
[ 1.062789] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 1.062854] usb usb8: configuration #1 chosen from 1 choice
[ 1.062877] hub 8-0:1.0: USB hub found
[ 1.062882] hub 8-0:1.0: 2 ports detected
[ 1.062984] PNP: No PS/2 controller found. Probing ports directly.
[ 1.065762] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.065766] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.065820] mice: PS/2 mouse device common for all mice
[ 1.065894] rtc_cmos 00:03: RTC can wake from S4
[ 1.065920] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.065941] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.066019] device-mapper: uevent: version 1.0.3
[ 1.066129] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel at redhat.com
[ 1.066266] device-mapper: multipath: version 1.1.0 loaded
[ 1.066270] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.066603] cpuidle: using governor ladder
[ 1.066606] cpuidle: using governor menu
[ 1.067083] TCP cubic registered
[ 1.067191] NET: Registered protocol family 10
[ 1.067551] lo: Disabled Privacy Extensions
[ 1.067789] NET: Registered protocol family 17
[ 1.067803] Bluetooth: L2CAP ver 2.13
[ 1.067805] Bluetooth: L2CAP socket layer initialized
[ 1.067808] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.067809] Bluetooth: SCO socket layer initialized
[ 1.067858] Bluetooth: RFCOMM TTY layer initialized
[ 1.067863] Bluetooth: RFCOMM socket layer initialized
[ 1.067865] Bluetooth: RFCOMM ver 1.11
[ 1.068448] PM: Resume from disk failed.
[ 1.068459] registered taskstats version 1
[ 1.068581] Magic number: 1:990:309
[ 1.068598] tty tty38: hash matches
[ 1.068659] rtc_cmos 00:03: setting system clock to 2009-11-05 03:20:22
UTC (1257391222)
[ 1.068661] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.068663] EDD information not available.
[ 1.183255] Switched to high resolution mode on CPU 2
[ 1.184123] Switched to high resolution mode on CPU 3
[ 1.184526] Switched to high resolution mode on CPU 1
[ 1.191828] Switched to high resolution mode on CPU 0
[ 1.373812] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.373834] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.373852] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.420033] usb 1-2: new high speed USB device using ehci_hcd and address
3
[ 1.553784] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.553799] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.553810] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.554683] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB04, max UDMA/100,
ATAPI AN
[ 1.555778] ata2.00: configured for UDMA/100
[ 1.556763] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B
SB04 PQ: 0 ANSI: 5
[ 1.558722] sr0: scsi3-mmc drive: 40x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 1.558726] Uniform CD-ROM driver Revision: 3.20
[ 1.558842] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.558905] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.574774] usb 1-2: configuration #1 chosen from 1 choice
[ 1.593077] ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[ 1.593080] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.593625] ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[ 1.593629] ata4.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.651402] ata3.00: configured for UDMA/133
[ 1.651492] scsi 2:0:0:0: Direct-Access ATA ST3320620AS
3.AA PQ: 0 ANSI: 5
[ 1.651645] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.651700] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320
GB/298 GiB)
[ 1.651738] sd 2:0:0:0: [sda] Write Protect is off
[ 1.651741] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.651761] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.651867] sda:
[ 1.651947] ata4.00: configured for UDMA/133
[ 1.652041] scsi 3:0:0:0: Direct-Access ATA ST3320620AS
3.AA PQ: 0 ANSI: 5
[ 1.652175] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320
GB/298 GiB)
[ 1.652193] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.652235] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.652238] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.652268] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.652408] sdb: sda1 sda3 < unknown partition table
[ 1.692122] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.706530] > sda4
[ 1.706820] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.706858] Freeing unused kernel memory: 660k freed
[ 1.706995] Write protecting the kernel read-only data: 7580k
[ 1.805712] ohci1394 0000:07:03.0: PCI INT A -> GSI 19 (level, low) ->
IRQ 19
[ 1.813104] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.813108] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.816839] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 1.816847] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed
0xfffffffb
[ 1.816851] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.816943] alloc irq_desc for 31 on node 0
[ 1.816945] alloc kstat_irqs on node 0
[ 1.816955] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[ 1.825306] [drm] Initialized drm 1.1.0 20060810
[ 1.831445] Initializing USB Mass Storage driver...
[ 1.831591] scsi8 : SCSI emulation for USB Mass Storage devices
[ 1.831681] usbcore: registered new interface driver usb-storage
[ 1.831684] USB Mass Storage support registered.
[ 1.839998] [drm] radeon default to kernel modesetting DISABLED.
[ 1.840215] usb-storage: device found at 3
[ 1.840216] usb-storage: waiting for device to settle before scanning
[ 1.840886] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.840891] pci 0000:01:00.0: setting latency timer to 64
[ 1.841040] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on
minor 0
[ 1.871154] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[e0014000-e00147ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.032602] usb 3-1: new low speed USB device using uhci_hcd and address
2
[ 2.092483] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:19:d1:a7:c9:17
[ 2.092486] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.092509] 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: ffffff-0ff
[ 2.291606] usb 3-1: configuration #1 chosen from 1 choice
[ 2.300723] usbcore: registered new interface driver hiddev
[ 2.337832] input: Chicony USB Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 2.337885] generic-usb 0003:04D9:0025.0001: input,hidraw0: USB HID v1.10
Keyboard [Chicony USB Keyboard] on usb-0000:00:1a.0-1/input0
[ 2.431777] input: Chicony USB Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[ 2.431828] generic-usb 0003:04D9:0025.0002: input,hidraw1: USB HID v1.10
Device [Chicony USB Keyboard] on usb-0000:00:1a.0-1/input1
[ 2.431842] usbcore: registered new interface driver usbhid
[ 2.431844] usbhid: v2.6:USB HID core driver
[ 2.581493] usb 5-1: new low speed USB device using uhci_hcd and address
2
[ 2.781149] usb 5-1: configuration #1 chosen from 1 choice
[ 2.797348] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input5
[ 2.797410] generic-usb 0003:046D:C03D.0003: input,hidraw2: USB HID v1.10
Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.2-1/input0
[ 3.081305] usb 5-2: new full speed USB device using uhci_hcd and address
3
[ 3.191405] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[0090270001e8034e]
[ 3.287133] usb 5-2: configuration #1 chosen from 1 choice
[ 6.840026] usb-storage: device scan complete
[ 6.840453] scsi 8:0:0:0: Direct-Access HP Officejet Pro L7
1.00 PQ: 0 ANSI: 2
[ 6.840996] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 6.843432] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 7.664139] xor: automatically using best checksumming function:
generic_sse
[ 7.709990] generic_sse: 8554.400 MB/sec
[ 7.709992] xor: using function: generic_sse (8554.400 MB/sec)
[ 7.711731] device-mapper: dm-raid45: initialized v0.2594b
[ 7.835910] PM: Starting manual resume from disk
[ 7.835913] PM: Resume from partition 252:4
[ 7.835915] PM: Checking hibernation image.
[ 7.836067] PM: Resume from disk failed.
[ 7.855536] EXT4-fs (dm-2): barriers enabled
[ 7.860356] kjournald2 starting: pid 579, dev dm-2:8, commit interval 5
seconds
[ 7.860366] EXT4-fs (dm-2): delayed allocation enabled
[ 7.860370] EXT4-fs: file extents enabled
[ 7.860673] EXT4-fs: mballoc enabled
[ 7.860691] EXT4-fs (dm-2): mounted filesystem with ordered data mode
[ 8.310125] type=1505 audit(1257391229.741:2): operation="profile_load"
pid=602 name=/usr/share/gdm/guest-session/Xsession
[ 8.312219] type=1505 audit(1257391229.741:3): operation="profile_load"
pid=603 name=/sbin/dhclient3
[ 8.312820] type=1505 audit(1257391229.741:4): operation="profile_load"
pid=603 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 8.313143] type=1505 audit(1257391229.741:5): operation="profile_load"
pid=603 name=/usr/lib/connman/scripts/dhclient-script
[ 8.335695] type=1505 audit(1257391229.762:6): operation="profile_load"
pid=604 name=/usr/bin/evince
[ 8.344947] type=1505 audit(1257391229.772:7): operation="profile_load"
pid=604 name=/usr/bin/evince-previewer
[ 8.350407] type=1505 audit(1257391229.772:8): operation="profile_load"
pid=604 name=/usr/bin/evince-thumbnailer
[ 8.366284] type=1505 audit(1257391229.793:9): operation="profile_load"
pid=606 name=/usr/lib/cups/backend/cups-pdf
[ 8.367035] type=1505 audit(1257391229.793:10): operation="profile_load"
pid=606 name=/usr/sbin/cupsd
[ 8.396136] type=1505 audit(1257391229.823:11): operation="profile_load"
pid=607 name=/usr/sbin/mysqld
[ 8.986684] Adding 9181108k swap on /dev/mapper/isw_bahdiiijae_Volume05.
Priority:-1 extents:1 across:9181108k
[ 9.402102] udev: starting version 147
[ 9.771415] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2
vid 0x03F0 pid 0x2112
[ 9.771443] usbcore: registered new interface driver usblp
[ 9.788811] lp: driver loaded but no devices found
[ 9.861127] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 9.861220] usbcore: registered new interface driver btusb
[ 9.912609] cfg80211: Calling CRDA to update world regulatory domain
[ 10.228578] heci: module is from the staging directory, the quality is
unknown, you have been warned.
[ 10.229549] heci: Intel(R) Management Engine Interface - version 5.0.0.31
[ 10.229551] heci: Copyright (c) 2003 - 2008 Intel Corporation.
[ 10.229776] heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.229782] heci 0000:00:03.0: setting latency timer to 64
[ 10.230041] heci: link layer has been established.
[ 10.343673] heci driver initialization successful.
[ 10.477931] EXT4-fs (dm-2): internal journal on dm-2:8
[ 10.524127] alloc irq_desc for 22 on node 0
[ 10.524130] alloc kstat_irqs on node 0
[ 10.524136] ath5k 0000:07:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 10.524190] ath5k 0000:07:01.0: registered as 'phy0'
[ 10.574157] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.634121] ath: EEPROM regdomain: 0x30
[ 10.634123] ath: EEPROM indicates we should expect a direct regpair map
[ 10.634125] ath: Country alpha2 being used: AM
[ 10.634127] ath: Regpair used: 0x30
[ 10.729990] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->
IRQ 22
[ 10.730053] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.732991] phy0: Selected rate control algorithm 'minstrel'
[ 10.733565] ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[ 10.733579] cfg80211: Calling CRDA for country: AM
[ 10.856434] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 11.330187] input: HDA Intel Line In at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 11.330283] input: HDA Intel Mic at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.330363] input: HDA Intel Mic at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.330453] input: HDA Intel Speaker at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.330522] input: HDA Intel Speaker at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.330581] input: HDA Intel Speaker at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.330672] input: HDA Intel HP Out at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 11.410421] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 11.410471] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 11.499073] EXT4-fs (dm-3): barriers enabled
[ 11.500060] kjournald2 starting: pid 1079, dev dm-3:8, commit interval 5
seconds
[ 11.509019] EXT4-fs (dm-3): internal journal on dm-3:8
[ 11.509032] EXT4-fs (dm-3): delayed allocation enabled
[ 11.509035] EXT4-fs: file extents enabled
[ 11.509172] EXT4-fs: mballoc enabled
[ 11.509183] EXT4-fs (dm-3): mounted filesystem with ordered data mode
[ 12.581009] EXT4-fs (dm-5): barriers enabled
[ 12.601899] kjournald2 starting: pid 1113, dev dm-5:8, commit interval 5
seconds
[ 12.611554] EXT4-fs (dm-5): internal journal on dm-5:8
[ 12.611559] EXT4-fs (dm-5): delayed allocation enabled
[ 12.611563] EXT4-fs: file extents enabled
[ 12.619302] EXT4-fs: mballoc enabled
[ 12.619317] EXT4-fs (dm-5): mounted filesystem with ordered data mode
[ 13.031538] EXT4-fs (dm-7): barriers enabled
[ 13.040678] kjournald2 starting: pid 1123, dev dm-7:8, commit interval 5
seconds
[ 13.050058] EXT4-fs (dm-7): internal journal on dm-7:8
[ 13.050061] EXT4-fs (dm-7): delayed allocation enabled
[ 13.050063] EXT4-fs: file extents enabled
[ 13.050600] EXT4-fs: mballoc enabled
[ 13.050613] EXT4-fs (dm-7): mounted filesystem with ordered data mode
[ 13.649132] EXT4-fs (dm-8): barriers enabled
[ 13.669567] kjournald2 starting: pid 1137, dev dm-8:8, commit interval 5
seconds
[ 13.678458] EXT4-fs (dm-8): internal journal on dm-8:8
[ 13.678463] EXT4-fs (dm-8): delayed allocation enabled
[ 13.678467] EXT4-fs: file extents enabled
[ 13.679283] EXT4-fs: mballoc enabled
[ 13.679299] EXT4-fs (dm-8): mounted filesystem with ordered data mode
[ 14.265852] __ratelimit: 3 callbacks suppressed
[ 14.265858] type=1505 audit(1257384035.695:13):
operation="profile_replace" pid=1244
name=/usr/share/gdm/guest-session/Xsession
[ 14.267237] type=1505 audit(1257384035.695:14):
operation="profile_replace" pid=1245 name=/sbin/dhclient3
[ 14.267841] type=1505 audit(1257384035.695:15):
operation="profile_replace" pid=1245
name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 14.268177] type=1505 audit(1257384035.695:16):
operation="profile_replace" pid=1245
name=/usr/lib/connman/scripts/dhclient-script
[ 14.270771] type=1505 audit(1257384035.695:17):
operation="profile_replace" pid=1246 name=/usr/bin/evince
[ 14.280035] type=1505 audit(1257384035.705:18):
operation="profile_replace" pid=1246 name=/usr/bin/evince-previewer
[ 14.285545] type=1505 audit(1257384035.715:19):
operation="profile_replace" pid=1246 name=/usr/bin/evince-thumbnailer
[ 14.293143] type=1505 audit(1257384035.715:20):
operation="profile_replace" pid=1250 name=/usr/lib/cups/backend/cups-pdf
[ 14.293851] type=1505 audit(1257384035.725:21):
operation="profile_replace" pid=1250 name=/usr/sbin/cupsd
[ 14.296134] type=1505 audit(1257384035.725:22):
operation="profile_replace" pid=1251 name=/usr/sbin/mysqld
[ 16.654845] usplash:517 freeing invalid memtype
ffffffffd0000000-ffffffffd1000000
[ 17.540251] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[ 17.600090] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[ 17.600968] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.680934] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.150915] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: RX/TX
[ 19.150919] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 19.151907] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.352807] __ratelimit: 12 callbacks suppressed
[ 19.352810] type=1503 audit(1257384040.782:27): operation="open" pid=1716
parent=1715 profile="/usr/sbin/mysqld" requested_mask="r::"
denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 20.606450] [drm] Setting GART location based on new memory map
[ 20.621701] [drm] Loading RV630 CP Microcode
[ 20.621864] [drm] Loading RV630 PFP Microcode
[ 20.636890] [drm] Resetting GPU
[ 20.636947] [drm] writeback test succeeded in 1 usecs
[ 20.781582] type=1503 audit(1257384042.201:28): operation="open" pid=1757
parent=1756 profile="/usr/sbin/mysqld" requested_mask="r::"
denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 20.876860] type=1503 audit(1257384042.303:29): operation="open" pid=1768
parent=1767 profile="/usr/sbin/mysqld" requested_mask="r::"
denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 22.921462] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 22.921465] vboxdrv: Successfully done.
[ 22.921466] vboxdrv: Found 4 processor cores.
[ 22.921519] VBoxDrv: dbg - g_abExecMemory=ffffffffa0343420
[ 22.921580] vboxdrv: fAsync=0 offMin=0x3f9 offMax=0x18d2
[ 22.921624] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 22.921626] vboxdrv: Successfully loaded version 3.0.10 (interface
0x000e0001).
[ 23.126476] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa04e21c0
[ 23.128578] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa04fbac0
[ 23.818929] ppdev: user-space parallel port driver
[ 23.970436] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.970439] Bluetooth: BNEP filters: protocol multicast
[ 23.975150] Bridge firewalling registered
[ 26.561890] usb 1-2: usbfs: interface 1 claimed by usblp while 'usb' sets
config #1
[ 29.670193] eth0: no IPv6 routers present
[ 104.694942] hda-intel: IRQ timing workaround is activated for card #1.
Suggest a bigger bdl_pos_adj.
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express
Root Port (rev 02)
00:03.0 Communication controller: Intel Corporation 82G33/G31/P35/P31
Express MEI Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit Network
Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port
1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port
2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port
3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port
4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port
5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface
Controller (rev 02)
00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller
(rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev
02)
01:00.0 VGA compatible controller: ATI Technologies Inc RV630 [Radeon HD
2600 Series]
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD
2600 Series]
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101 single-port
PATA133 interface (rev b1)
07:01.0 Ethernet controller: Atheros Communications Inc. Atheros AR5001X+
Wireless Network Adapter (rev 01)
07:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000
Controller (PHY/Link)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-users/attachments/20091105/c19abd18/attachment.html>
More information about the ubuntu-users
mailing list