sharing files between ubuntu computers
Gary Kirkpatrick
pegngary at gmail.com
Sat May 30 21:00:45 UTC 2009
Sorry I don't know the difference between whatever I gave you and a root table.
sudo Ifconfig shows 192.168.2.100 (is there anything else I should be
looking for?) in the jaunty and
locate sshd shows:
/etc/pam.d/sshd
/etc/ssh/sshd_config
/usr/sbin/sshd
/usr/share/man/man5/sshd_config.5.gz
/usr/share/man/man8/sshd.8.gz
/usr/share/vim/vim72/syntax/sshdconfig.vim
On the intrepid you get 192.168.1.151 but sshd only takes me back to a
prompt! Is this bad?
thanks
gary
On 5/30/09, Karl F. Larsen <klarsen1 at gmail.com> wrote:
> Gary Kirkpatrick wrote:
>> On Sat, May 30, 2009 at 3:25 PM, Gary Kirkpatrick
>> <pegngary at gmail.com>wrote:
>>
>>
>>> On Sat, May 30, 2009 at 1:14 PM, Alexandra Zaharia
>>> <f0rg3r at gmail.com>wrote:
>>>
>>>
>>>> On Sat, May 30, 2009 at 9:00 PM, Gary Kirkpatrick <pegngary at gmail.com>
>>>> wrote:
>>>>
>>>>> I can't ping the .100 from the .151
>>>>>
>>>> route -n
>>>>
>>>> on each of the two machines?
>>>>
>>>> --
>>>> ubuntu-users mailing list
>>>> ubuntu-users at lists.ubuntu.com
>>>> Modify settings or unsubscribe at:
>>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
>>>>
>>>>
>>> Thanks, Karl!
>>>
>>>
>>> Route N on the jaunty reads:
>>>
>>> ~$ route -n
>>> Kernel IP routing table
>>> Destination Gateway Genmask Flags Metric Ref Use
>>> Iface
>>> 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0
>>> eth1
>>> 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0
>>> eth1
>>> 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0
>>> eth1
>>>
>>> in a moment I will send the route on the intrepid.
>>>
>>> gary
>>>
>>
>>
>> on the intrepid:
>>
>>
>> Kernel IP routing table
>> Destination Gateway Genmask Flags Metric Ref Use
>> Iface
>> 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0
>> eth1
>> 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0
>> eth1
>> 0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0
>> eth1
>>
>> gary
>>
>>
> Gary I didn't ask for your root table. Here is from my Hardy
> computer and is easy to see:
>
> karl at karl-hardy:~$ sudo ifconfig
> [sudo] password for karl:
> eth0 Link encap:Ethernet HWaddr 00:e0:4d:1f:a2:b4
> inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0
> inet6 addr: fe80::2e0:4dff:fe1f:a2b4/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1
> RX packets:17415 errors:0 dropped:0 overruns:0 frame:0
> TX packets:15219 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:14014346 (13.3 MB) TX bytes:2162887 (2.0 MB)
> Interrupt:18 Base address:0x4000
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:1680 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1680 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:84000 (82.0 KB) TX bytes:84000 (82.0 KB)
>
> karl at karl-hardy:~$ locate sshd
> /etc/pam.d/sshd
> /etc/ssh/sshd_config
> /home/karl/sshd
> /home/karl/sshd~
> /usr/sbin/sshd
> /usr/share/man/man5/sshd_config.5.gz
> /usr/share/man/man8/sshd.8.gz
> karl at karl-hardy:~$
>
> This proves my Hardy ip address is 192.168.2.2 and that I have ssh
> installed.
>
> Now my Jaunty laptop has an ip address of 192.168.2.4 and has ssh
> installed as well.
>
> Now I am going to connect to Jaunty from Hardy and it looks like this:
>
> karl at karl-hardy:~$ sftp 192.168.2.4
> Connecting to 192.168.2.4...
> karl at 192.168.2.4's password:
> sftp> ls
> 8.jpg Desktop Documents
> Music
> Pictures Public Templates
> Videos
> bin cplus dmesg.log
> email-list.csv
> kernel-data kgnome2_private libdvdcss.eml
> log-for-29jan.txt
> log-for-29jan.txt~ lspci810.log mysqlaccess.log
> profiles.ini
> scp.txt scp.txt~ wifi
> wifi~
> winestore.data wireless
> sftp>
>
> Now I will disconnect from Jaunty:
>
> If you do not get what I get there is something wrong with either or
> both your computers. Compare them to this and try to fix them.
>
> 73 karl
>
>
>
> --
>
> Karl F. Larsen, AKA K5DI
> Linux User
> #450462 http://counter.li.org.
> PGP 4208 4D6E 595F 22B9 FF1C ECB6 4A3C 2C54 FE23 53A7
>
>
> --
> ubuntu-users mailing list
> ubuntu-users at lists.ubuntu.com
> Modify settings or unsubscribe at:
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
>
More information about the ubuntu-users
mailing list