mounting windows partition automatically on HP Pavilion laptop (second try)

[NoOp]

On 06/05/2009 02:16 AM, Avraham Hanadari wrote:
> I made three partitions on my HP Pavilion laptop, when I dumped Vista.
> One is for XP (NTFS); one is for data (NTFS) and one is for Ubuntu 9.04.
> All work fine and I have no trouble manually mounting the data partition
> from U904. I just set about writing to fstab to make an automatic bootup
> mounting of the data partition, but I encountered very unfamiliar file
> content.
> 
> fdisk -l
> 
> Disk /dev/sda: 120.0 GB, 120034123776 bytes
> 255 heads, 63 sectors/track, 14593 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> Disk identifier: 0x6125db67
> 
>     Device Boot      Start         End      Blocks   Id  System
> /dev/sda1   *           1        5099    40957686    7  HPFS/NTFS
> /dev/sda2            5100       14593    76260555    f  W95 Ext'd (LBA)
> /dev/sda5            5100       10198    40957686    7  HPFS/NTFS
> /dev/sda6           10199       11664    11775613+   7  HPFS/NTFS
> /dev/sda7           11665       14466    22507033+  83  Linux
> /dev/sda8           14467       14593     1020096   82  Linux swap / Solaris
> 
> 
> I have performed this operation in the past on tabletop computers, but I
> have never encountered a configuration quite like this. I thought I had
> three more or less equally sized partitions. fdisk reveals twice that.
> 
> I am guessing that sda1 and sda2 are my XP + hibernation mirror, and
> sda5/6 are my data partition. I am also guessing that sda5 is what I
> want to mount at bootup, so I should do the following:
> 
> 
> gksu gedit /etc/fstab
> 
> /dev/hda5       /media/windows  ntfs    iocharset=utf8,umask=000   0       0
> 
> 
> My fstab looks very unfamiliar, however, and I am unsure where to put
> the new line. Why does it say " was on ... during installation? Is that
> now significant?
> 
> 
> # /etc/fstab: static file system information.
> #
> # Use 'vol_id --uuid' to print the universally unique identifier for a
> # device; this may be used with UUID= as a more robust way to name devices
> # that works even if disks are added and removed. See fstab(5).
> #
> # <file system> <mount point>   <type>  <options>       <dump>  <pass>
> proc            /proc           proc    defaults        0       0
> # / was on /dev/sda7 during installation
> UUID=4e925b6f-5b0c-4080-ab60-eb1a5d31d62a /               ext3
> relatime,errors=remount-ro 0       1
> # swap was on /dev/sda8 during installation
> UUID=f1adf060-da0a-49b2-b96a-74ef4aeb00ec none            swap    sw
>            0       0
> /dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0
> 
> I would appreciate your advice, especially if you have experience with
> the HP laptop. I already made the windows directory in media. Is the
> mounting line correct for these circumstances? Should I just add it to
> the end of fstab?
> 
> Thanks in advance, Avraham
> 
> 

sda1 is your primary Windows particion. Give this a try:

# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# / was on /dev/sda7 during installation
UUID=4e925b6f-5b0c-4080-ab60-eb1a5d31d62a /   ext3
relatime,errors=remount-ro 0       1
# swap was on /dev/sda8 during installation
UUID=f1adf060-da0a-49b2-b96a-74ef4aeb00ec none  swap    sw   0       0
/dev/scd0  /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0
/dev/sda1  /media/windows1 ntfs-3g defaults,locale=en_US.UTF-8 0 0
/dev/sda5  /media/windows2 ntfs-3g defaults,locale=en_US.UTF-8 0 0
/dev/sda6  /media/windows3 ntfs-3g defaults,locale=en_US.UTF-8 0 0

Obviously you will need to 'sudo mkdir /media/windows2-3' first. Then
from a terminal try:

$ sudo mount -a

And see what errors, if any, show up. If no errors, you can browse the
sda1, 5 & 6 to see which partitions you'd like auto mounted at boot/reboot.