Problems with ti_usb_3410_5052 kernel module.
Karl F. Larsen
klarsen1 at gmail.com
Mon Jul 27 18:51:44 UTC 2009
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Matt Wiseman wrote:
> Sorry for reposting, but haven't gotten any response yet.
>
> I'm using a Multitech Systems MultiModem GPRS model MTCBA-G-U-F4.
> They've got linux drivers on their page:
> http://www.multitech.com/en_US/SUPPORT/Families/MultiModemGPRS/drivers.asp
> But they do not work with ubuntu due to some changes in the Debian
> kernel headers dealing with USB. It still supposedly works with Fedora,
> RH and Suse.
>
> Amazingly, it works out of the box on PuppyLinux. I've got results from
> both here:
>
> ########################################
> #### UBUNTU RESULTS ###
> ########################################
>
> DMESG:
> root at ubuntu-desktop:~# dmesg -c
> root at ubuntu-desktop:~# dmesg -c
> [255659.388058] usb 5-2: new full speed USB device using uhci_hcd and
> address 6
> [255659.576868] usb 5-2: configuration #1 chosen from 1 choice
> root at ubuntu-desktop:~# dmesg -c
> root at ubuntu-desktop:~# dmesg -c
>
>
> LSMOD:
> Module Size Used by
> ti_usb_3410_5052 33608 0
> usbserial 39656 1 ti_usb_3410_5052
> nls_iso8859_1 12032 0
> nls_cp437 13696 0
> vfat 18816 0
> fat 58272 1 vfat
> usb_storage 99520 0
> binfmt_misc 16776 1
> bnep 20224 2
> ipt_MASQUERADE 10752 1
> iptable_nat 13700 1
> nf_nat 25876 2 ipt_MASQUERADE,iptable_nat
> nf_conntrack_ipv4 21388 4 iptable_nat,nf_nat
> nf_defrag_ipv4 9984 1 nf_conntrack_ipv4
> xt_state 10112 1
> nf_conntrack 72008 5
> ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state
> ipt_REJECT 11136 2
> xt_tcpudp 11008 4
> iptable_filter 10752 1
> ip_tables 19472 2 iptable_nat,iptable_filter
> x_tables 23044 6
> ipt_MASQUERADE,iptable_nat,xt_state,ipt_REJECT,xt_tcpudp,ip_tables
> bridge 56340 0
> stp 10500 1 bridge
> ppdev 15620 0
> parport_pc 40100 0
> input_polldev 11912 0
> video 25360 0
> output 11008 1 video
> lp 17156 0
> parport 42220 3 ppdev,parport_pc,lp
> snd_usb_audio 90400 1
> snd_usb_lib 24320 1 snd_usb_audio
> snd_hwdep 15108 1 snd_usb_audio
> snd_seq_dummy 10756 0
> snd_seq_oss 37760 0
> snd_ca0106 39968 3
> snd_seq_midi 14336 0
> snd_ac97_codec 112292 1 snd_ca0106
> snd_rawmidi 29696 3 snd_usb_lib,snd_ca0106,snd_seq_midi
> snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
> snd_pcm_oss 46336 0
> snd_mixer_oss 22656 1 snd_pcm_oss
> snd_seq 56880 7
> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
> snd_seq_device 14988 5
> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
> snd_pcm 82948 5
> snd_usb_audio,snd_ca0106,snd_ac97_codec,snd_pcm_oss
> iTCO_wdt 19108 0
> iTCO_vendor_support 11652 1 iTCO_wdt
> snd_timer 29704 2 snd_seq,snd_pcm
> ac97_bus 9856 1 snd_ac97_codec
> snd 62628 20
> snd_usb_audio,snd_hwdep,snd_seq_oss,snd_ca0106,snd_ac97_codec,snd_rawmidi,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_pcm,snd_timer
> uvcvideo 63240 0
> compat_ioctl32 9344 1 uvcvideo
> videodev 41600 1 uvcvideo
> v4l1_compat 21764 2 uvcvideo,videodev
> nvidia 7097928 36
> snd_page_alloc 16904 2 snd_ca0106,snd_pcm
> soundcore 15200 1 snd
> intel_agp 34108 0
> pcspkr 10496 0
> agpgart 42696 2 nvidia,intel_agp
> psmouse 61972 0
> serio_raw 13316 0
> usbhid 42336 0
> r8169 40836 0
> mii 13312 1 r8169
> fbcon 46112 0
> tileblit 10752 1 fbcon
> font 16384 1 fbcon
> bitblit 13824 1 fbcon
> softcursor 9984 1 bitblit
>
>
>
> ########################################
> #### PUPPY RESULTS ###
> ########################################
> DMESG:
> usb 2-8.1: new full speed USB device using ehci_hcd and address 18
> usb 2-8.1: configuration #1 chosen from 1 choice
> ti_usb_3410_5052 2-8.1:1.0: TI USB 3410 1 port adapter converter
> detected
> usb 2-8.1: reset full speed USB device using ehci_hcd and address 18
> usb 2-8.1: device firmware changed
> usb 2-8.1: USB disconnect, address 18
> ti_usb_3410_5052 2-8.1:1.0: device disconnected
> usb 2-8.1: new full speed USB device using ehci_hcd and address 19
> usb 2-8.1: configuration #1 chosen from 2 choices
> ti_usb_3410_5052 2-8.1:1.0: TI USB 3410 1 port adapter converter
> detected
> ti_usb_3410_5052 2-8.1:1.0: device disconnected
> ti_usb_3410_5052 2-8.1:2.0: TI USB 3410 1 port adapter converter
> detected
> usb 2-8.1: TI USB 3410 1 port adapter converter now attached to ttyUSB0
>
>
>
> LSMOD:
> Module Size Used by
> ti_usb_3410_5052 55752 0
> usbserial 32872 1 ti_usb_3410_5052
> parport_pc 31204 1
> lp 12232 0
> parport 35400 2 parport_pc,lp
> snd_pcm_oss 41120 0
> snd_seq_dummy 3972 0
> snd_seq_oss 33152 0
> snd_seq_midi_event 7296 1 snd_seq_oss
> snd_seq 48208 5
> snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
> snd_seq_device 8588 3 snd_seq_dummy,snd_seq_oss,snd_seq
> snd_mixer_oss 16896 1 snd_pcm_oss
> evdev 10240 0
> serio_raw 6916 0
> pcspkr 2816 0
> hsfpcibasic2 67096 0
> hsfserial 22948 1 hsfpcibasic2
> hsfengine 1265676 2 hsfpcibasic2,hsfserial
> hsfosspec 101736 4 hsfpcibasic2,hsfserial,hsfengine
> hsfsoar 86408 1 hsfpcibasic2
> forcedeth 45320 0
> snd_intel8x0 33436 0
> snd_ac97_codec 100772 1 snd_intel8x0
> ac97_bus 2304 1 snd_ac97_codec
> snd_pcm 74248 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
> snd_timer 22404 2 snd_seq,snd_pcm
> snd 54052 10
> snd_pcm_oss,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
> soundcore 7520 1 snd
> snd_page_alloc 10632 2 snd_intel8x0,snd_pcm
> i2c_nforce2 5888 0
> i2c_core 21648 1 i2c_nforce2
> fuse 44820 0
> aufs 151456 3
> nls_iso8859_1 4224 1
> nls_cp437 5888 1
> usbhid 24544 0
> usb_storage 83008 1
> ehci_hcd 30476 0
> ohci_hcd 20868 0
> usbcore 126104 8
> ti_usb_3410_5052,usbserial,hsfosspec,usbhid,usb_storage,ehci_hcd,ohci_hcd
> sr_mod 17444 0
> ide_cd 39072 0
> cdrom 36768 2 sr_mod,ide_cd
> squashfs 46856 1
>
>
>
>
> Any help on this would be appreciated, I'm pulling my hair out over
> here. I've asked a couple times in #ubuntu on freenode.
I went to the web page and they are good and say exactly which of the
Red Hat commercial Linux packages work with what model. Nowhere did it
say it will work with Ubuntu.
If you want to use Linux I suggest you buy the red hat version they say
works. As is usual they also specify a particular kernel!
73 Karl
- --
Karl F. Larsen, AKA K5DI
Linux User
#450462 http://counter.li.org.
Key ID = 3951B48D
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFKbfdANuSIOjlRtI0RAhB3AJ9ko74NlTYxTKMc0wlgNnOxXTj4xgCgpNr4
P1P2+CnAFwD+rOyq63rClI0=
=dfp6
-----END PGP SIGNATURE-----
More information about the ubuntu-users
mailing list