xserver-xorg-video-geode: Problems with geode Xorg driver
Charlie Kravetz
cjk at teamcharliesangels.com
Thu Nov 27 04:13:05 UTC 2008
On Thu, 20 Nov 2008 15:34:36 +0000
Jan Eringa <j_eringa at yahoo.co.nz> wrote:
> Package: xserver-xorg-video-geode
> Version: 2.10.1-3build1
> Severity: important
>
>
> When using the XAA AccelMethod the xserver starts but the screen is
> corrupted When I try the EXA AccelMethod the server crashes ... Xorg
> log attached The only driver I seem to be able to use is the vesa
> driver whicj is slow as a wet week :(
>
> The machine vendor/model is a viglen MPC-L
>
>
>
> Cheers
>
>
> Jan.
>
>
> -- Package-specific info:
> Contents of /var/lib/x11/X.roster:
> xserver-xorg
>
> /var/lib/x11/X.md5sum does not exist.
>
> X server symlink status:
> lrwxrwxrwx 1 root root 13 2007-06-09 01:48 /etc/X11/X -> /usr/bin/Xorg
> -rwxr-xr-x 1 root root 1656476 2008-10-24 09:06 /usr/bin/Xorg
>
> Contents of /var/lib/x11/xorg.conf.roster:
> xserver-xorg
>
> VGA-compatible devices on PCI bus:
> 00:01.1 VGA compatible controller: National Semiconductor Corporation
> Geode GX2 Graphics Processor
>
> /etc/X11/xorg.conf does not match checksum
> in /var/lib/x11/xorg.conf.md5sum.
>
> Xorg X server configuration file status:
> -rw-r--r-- 1 root root 3773 2008-11-20 14:49 /etc/X11/xorg.conf
>
> Contents of /etc/X11/xorg.conf:
> # /etc/X11/xorg.conf (xorg X Window System server configuration file)
> #
> # This file was generated by dexconf, the Debian X Configuration
> tool, using # values from the debconf database.
> #
> # Edit this file with caution, and see the xorg.conf(5) manual page.
> # (Type "man xorg.conf" at the shell prompt.)
> #
> # This file is automatically updated on xserver-xorg package upgrades
> *only* # if it has not been modified since the last upgrade of the
> xserver-xorg # package.
> #
> # If you have edited this file but would like it to be automatically
> updated # again, run the following command:
> # sudo dpkg-reconfigure -phigh xserver-xorg
>
> Section "Files"
> FontPath "/usr/share/fonts/X11/misc"
> FontPath "/usr/share/fonts/X11/cyrillic"
> FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
> FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
> FontPath "/usr/share/fonts/X11/Type1"
> FontPath "/usr/share/fonts/X11/100dpi"
> FontPath "/usr/share/fonts/X11/75dpi"
> # path to defoma fonts
> FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> EndSection
>
> Section "Module"
> Load "i2c"
> Load "bitmap"
> Load "ddc"
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "vbe"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "kbd"
> Option "CoreKeyboard"
> Option "XkbRules" "xorg"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "gb"
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "ImPS/2"
> Option "ZAxisMapping" "4 5"
> Option "Emulate3Buttons" "false"
> EndSection
>
>
>
> Section "Device"
> Identifier "Generic Video Card"
> Driver "geode"
> Option "AccelMethod" "EXA"
> # Option "OSMImageBuffers" "512"
> # Option "OSMColorExpBuffers" "512"
> Option "FBSize" "16777216"
> # Option "NoCompression"
> # Option "NoPanel"
> BusID "PCI:0:1:1"
> # == GX ==
> # SWCursor: Enable software cursors (essentially disabling HW
> cursor support) # NoCompression: Disable video bandwidth
> compression # NoAccel: Disable hardware assisted acceleration
> # AccelMethod: "EXA" (default) or "XAA"
> # Rotate: Select a orientation to start with - LEFT, INVERT,
> CCW # NoPanel: Disable panel support
> # OSMImageBuffers: Set the number of image buffers (XAA only)
> # OSMColorExpBuffers: Set the number of color expansion
> buffers (XAA only) # FBSize: Specify the size of the video
> space (in bytes) # PanelGeometry: Specify the geometry of the
> attached panel ("<width>x<height>") EndSection
>
> Section "Monitor"
> Identifier "Generic Monitor"
> Option "DPMS"
> # HorizSync 28-113
> # VertRefresh 43-60
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device "Generic Video Card"
> Monitor "Generic Monitor"
> DefaultDepth 24
> SubSection "Display"
> Depth 1
> Modes "1024x768" "832x624" "800x600"
> "720x400" "640x480" "504x255" "304x190" "248x248" EndSubSection
> SubSection "Display"
> Depth 4
> Modes "1024x768" "832x624" "800x600"
> "720x400" "640x480" "504x255" "304x190" "248x248" EndSubSection
> SubSection "Display"
> Depth 8
> Modes "1024x768" "832x624" "800x600"
> "720x400" "640x480" "504x255" "304x190" "248x248" EndSubSection
> SubSection "Display"
> Depth 15
> Modes "1024x768" "832x624" "800x600"
> "720x400" "640x480" "504x255" "304x190" "248x248" EndSubSection
> SubSection "Display"
> Depth 16
> Modes "1024x768" "832x624" "800x600"
> "720x400" "640x480" "504x255" "304x190" "248x248" EndSubSection
> SubSection "Display"
> Depth 24
> Modes "800x600" "1024x768" "832x624"
> "800x600" "720x400" "640x480" "504x255" "304x190" "248x248"
> EndSubSection EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Default Screen"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
>
> Xorg X server log files on system:
> -rw-r--r-- 1 root root 27254 2008-11-20 15:14 /var/log/Xorg.0.log
>
> Contents of most recent Xorg X server log file
> /var/log/Xorg.0.log:
>
> X.Org X Server 1.5.2
> Release Date: 10 October 2008
> X Protocol Version 11, Revision 0
> Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
> Current Operating System: Linux mpc-xubuntu 2.6.27-7-generic #1 SMP
> Tue Nov 4 19:33:20 UTC 2008 i586 Build Date: 24 October 2008
> 08:00:16AM xorg-server 2:1.5.2-2ubuntu3 (buildd at rothera.buildd)
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 20 15:14:09 2008
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "Generic Monitor"
> (**) | |-->Device "Generic Video Card"
> (**) |-->Input Device "Generic Keyboard"
> (**) |-->Input Device "Configured Mouse"
> (==) Automatically adding devices
> (==) Automatically enabling devices
> (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
> Entry deleted from font path.
> (==) Including the default font
> path /usr/share/fonts/X11/misc,/usr/share/fonts/X11/cyrillic,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType.
> (**) FontPath set to: /usr/share/fonts/X11/misc,
> /usr/share/fonts/X11/100dpi/:unscaled,
> /usr/share/fonts/X11/75dpi/:unscaled,
> /usr/share/fonts/X11/Type1,
> /usr/share/fonts/X11/100dpi,
> /usr/share/fonts/X11/75dpi,
> /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
> /usr/share/fonts/X11/misc,
> /usr/share/fonts/X11/cyrillic,
> /usr/share/fonts/X11/100dpi/:unscaled,
> /usr/share/fonts/X11/75dpi/:unscaled,
> /usr/share/fonts/X11/Type1,
> /usr/share/fonts/X11/100dpi,
> /usr/share/fonts/X11/75dpi,
> /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
> (==) ModulePath set to "/usr/lib/xorg/modules"
> (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or
> directory) (II) Open APM successful
> (II) Loader magic: 0x81d9a40
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.4
> X.Org Video Driver: 4.1
> X.Org XInput driver : 2.1
> X.Org Server Extension : 1.1
> X.Org Font Renderer : 0.6
> (II) Loader running on linux
> (++) using VT number 9
>
> (--) PCI:*(0 at 0:1:1) National Semiconductor Corporation Geode GX2
> Graphics Processor rev 0, Mem @ 0x41000000/0, 0x40ffc000/0,
> 0x40ff8000/0, 0x40ff4000/0 (II) System resource ranges: [0] -1
> 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0
> 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0
> 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0
> 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0
> 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000
> - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded. This was
> enabled by default and also specified in the config file. (II) "dbe"
> will be loaded by default. (II) "glx" will be loaded. This was
> enabled by default and also specified in the config file. (II)
> "freetype" will be loaded. This was enabled by default and also
> specified in the config file. (II) "record" will be loaded by
> default. (II) "dri" will be loaded. This was enabled by default and
> also specified in the config file. (II) LoadModule: "i2c" (II) Module
> "i2c" already built-in (II) LoadModule: "ddc"
> (II) Module "ddc" already built-in
> (II) LoadModule: "dri"
>
> (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 1.5.2, module version = 1.0.0
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "extmod"
>
> (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> compiled for 1.5.2, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "freetype"
>
> (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
> (II) Module freetype: vendor="X.Org Foundation & the After X-TT
> Project" compiled for 1.5.2, module version = 2.1.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.6
> (II) Loading font FreeType
> (II) LoadModule: "glx"
>
> (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 1.5.2, module version = 1.0.0
> ABI class: X.Org Server Extension, version 1.1
> (==) AIGLX enabled
> (==) Exporting typical set of GLX visuals
> (II) Loading extension GLX
> (II) LoadModule: "int10"
>
> (II) Loading /usr/lib/xorg/modules//libint10.so
> (II) Module int10: vendor="X.Org Foundation"
> compiled for 1.5.2, module version = 1.0.0
> ABI class: X.Org Video Driver, version 4.1
> (II) LoadModule: "vbe"
>
> (II) Loading /usr/lib/xorg/modules//libvbe.so
> (II) Module vbe: vendor="X.Org Foundation"
> compiled for 1.5.2, module version = 1.1.0
> ABI class: X.Org Video Driver, version 4.1
> (II) LoadModule: "dbe"
>
> (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 1.5.2, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "record"
>
> (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
> (II) Module record: vendor="X.Org Foundation"
> compiled for 1.5.2, module version = 1.13.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension RECORD
> (II) LoadModule: "geode"
>
> (II) Loading /usr/lib/xorg/modules/drivers//geode_drv.so
> (II) Module geode: vendor="X.Org Foundation"
> compiled for 1.5.2, module version = 2.10.1
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 4.1
> (II) LoadModule: "kbd"
>
> (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
> compiled for 1.4.99.905, module version = 1.3.1
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 2.1
> (II) LoadModule: "mouse"
>
> (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 1.4.99.905, module version = 1.3.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 2.1
> (II) GEODE: Driver for AMD Geode Chipsets: Geode LX, Geode GX
> (II) Primary Device is: PCI 00 at 00:01:1
> AmdPciProbe: Probing for supported devices!
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
> (II) GEODE(0): AmdPciProbe: CPUDetected 16!
> (II) resource ranges after probing:
> [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
> [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (WW) System lacks support for changing MTRRs
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
>
> (II) Loading /usr/lib/xorg/modules//libvgahw.so
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 1.5.2, module version = 0.1.0
> ABI class: X.Org Video Driver, version 4.1
> (**) GEODE(0): Depth 24, (--) framebuffer bpp 32
> (==) GEODE(0): RGB weight 888
> (==) GEODE(0): Default visual is TrueColor
> (==) GEODE(0): Using gamma correction (1.0, 1.0, 1.0)
> (**) GEODE(0): Option "AccelMethod" "EXA"
> (**) GEODE(0): Option "FBSize" "16777216"
> (II) GEODE(0): Using EXA acceleration architecture
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
>
> (II) Reloading /usr/lib/xorg/modules//libint10.so
> (II) GEODE(0): Primary V_BIOS segment is: 0xc000
> (II) GEODE(0): I2C bus "CS5536 DDC BUS" initialized.
> (II) GEODE(0): I2C device "CS5536 DDC BUS:ddc2" registered at address
> 0xA0. (II) GEODE(0): I2C device "CS5536 DDC BUS:ddc2" removed.
> (II) GEODE(0): I2C bus "CS5536 DDC BUS" removed.
> (II) GEODE(0): Generic Monitor: Using default hsync range of
> 31.50-37.90 kHz (II) GEODE(0): Generic Monitor: Using default
> vrefresh range of 50.00-70.00 Hz (II) GEODE(0): Clock range: 25.18
> to 229.50 MHz (II) GEODE(0): Not using default mode
> "640x350" (vrefresh out of range) (II) GEODE(0): Not using default
> mode "320x175" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "640x400" (vrefresh out of range) (II)
> GEODE(0): Not using default mode "320x200" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "720x400" (vrefresh out of range) (II) GEODE(0): Not using default
> mode "360x200" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "320x240" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "640x480" (vrefresh out of range) (II) GEODE(0): Not using default
> mode "320x240" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "640x480" (vrefresh out of range) (II)
> GEODE(0): Not using default mode "320x240" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "640x480" (hsync out of range) (II) GEODE(0): Not using default mode
> "320x240" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using default mode "400x300" (bad mode clock/interlace/doublescan)
> (II) GEODE(0): Not using default mode "400x300" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "800x600" (hsync out of range) (II) GEODE(0): Not using default mode
> "400x300" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using default mode "800x600" (hsync out of range) (II) GEODE(0): Not
> using default mode "400x300" (bad mode clock/interlace/doublescan)
> (II) GEODE(0): Not using default mode "800x600" (hsync out of range)
> (II) GEODE(0): Not using default mode "400x300" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1024x768" (interlace mode not supported) (II) GEODE(0): Not using
> default mode "512x384" (bad mode clock/interlace/doublescan) (II)
> GEODE(0): Not using default mode "1024x768" (hsync out of range) (II)
> GEODE(0): Not using default mode "512x384" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1024x768" (hsync out of range) (II) GEODE(0): Not using default mode
> "512x384" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using default mode "1024x768" (hsync out of range) (II) GEODE(0): Not
> using default mode "512x384" (bad mode clock/interlace/doublescan)
> (II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
> (II) GEODE(0): Not using default mode "512x384" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1152x864" (hsync out of range) (II) GEODE(0): Not using default mode
> "576x432" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using default mode "1280x960" (hsync out of range) (II) GEODE(0): Not
> using default mode "640x480" (bad mode clock/interlace/doublescan)
> (II) GEODE(0): Not using default mode "1280x960" (hsync out of range)
> (II) GEODE(0): Not using default mode "640x480" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1280x1024" (hsync out of range) (II) GEODE(0): Not using default
> mode "640x512" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "1280x1024" (hsync out of range) (II)
> GEODE(0): Not using default mode "640x512" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1280x1024" (hsync out of range) (II) GEODE(0): Not using default
> mode "640x512" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "1600x1200" (hsync out of range) (II)
> GEODE(0): Not using default mode "800x600" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1600x1200" (hsync out of range) (II) GEODE(0): Not using default
> mode "800x600" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "1600x1200" (hsync out of range) (II)
> GEODE(0): Not using default mode "800x600" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1600x1200" (hsync out of range) (II) GEODE(0): Not using default
> mode "800x600" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "1600x1200" (hsync out of range) (II)
> GEODE(0): Not using default mode "800x600" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1792x1344" (hsync out of range) (II) GEODE(0): Not using default
> mode "896x672" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "1792x1344" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "896x672" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using default mode "1856x1392" (hsync out of range) (II) GEODE(0):
> Not using default mode "928x696" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1856x1392" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using default mode "928x696" (bad mode clock/interlace/doublescan)
> (II) GEODE(0): Not using default mode "1920x1440" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "960x720" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using default mode "1920x1440" (bad mode clock/interlace/doublescan)
> (II) GEODE(0): Not using default mode "960x720" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "832x624" (hsync out of range) (II) GEODE(0): Not using default mode
> "416x312" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using default mode "1152x864" (hsync out of range) (II) GEODE(0): Not
> using default mode "576x432" (bad mode clock/interlace/doublescan)
> (II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
> (II) GEODE(0): Not using default mode "576x432" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1152x864" (hsync out of range) (II) GEODE(0): Not using default mode
> "576x432" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using default mode "1152x864" (hsync out of range) (II) GEODE(0): Not
> using default mode "576x432" (bad mode clock/interlace/doublescan)
> (II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
> (II) GEODE(0): Not using default mode "576x432" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1152x864" (hsync out of range) (II) GEODE(0): Not using default mode
> "576x432" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using default mode "1360x768" (hsync out of range) (II) GEODE(0): Not
> using default mode "680x384" (bad mode clock/interlace/doublescan)
> (II) GEODE(0): Not using default mode "1360x768" (hsync out of range)
> (II) GEODE(0): Not using default mode "680x384" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1400x1050" (hsync out of range) (II) GEODE(0): Not using default
> mode "700x525" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "1400x1050" (hsync out of range) (II)
> GEODE(0): Not using default mode "700x525" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1400x1050" (hsync out of range) (II) GEODE(0): Not using default
> mode "700x525" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "1400x1050" (hsync out of range) (II)
> GEODE(0): Not using default mode "700x525" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1440x900" (hsync out of range) (II) GEODE(0): Not using default mode
> "720x450" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using default mode "1600x1024" (hsync out of range) (II) GEODE(0):
> Not using default mode "800x512" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1680x1050" (hsync out of range) (II) GEODE(0): Not using default
> mode "840x525" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "1680x1050" (hsync out of range) (II)
> GEODE(0): Not using default mode "840x525" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1680x1050" (hsync out of range) (II) GEODE(0): Not using default
> mode "840x525" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "1680x1050" (hsync out of range) (II)
> GEODE(0): Not using default mode "840x525" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1680x1050" (hsync out of range) (II) GEODE(0): Not using default
> mode "840x525" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "1920x1080" (hsync out of range) (II)
> GEODE(0): Not using default mode "960x540" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1920x1200" (hsync out of range) (II) GEODE(0): Not using default
> mode "960x600" (bad mode clock/interlace/doublescan) (II) GEODE(0):
> Not using default mode "1920x1440" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "960x720" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using default mode "2048x1536" (bad mode clock/interlace/doublescan)
> (II) GEODE(0): Not using default mode "1024x768" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "2048x1536" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) GEODE(0): Not using default mode "2048x1536" (bad mode
> clock/interlace/doublescan) (II) GEODE(0): Not using default mode
> "1024x768" (bad mode clock/interlace/doublescan) (II) GEODE(0): Not
> using mode "1024x768" (no mode of this name) (II) GEODE(0): Not using
> mode "832x624" (no mode of this name) (II) GEODE(0): Not using mode
> "720x400" (no mode of this name) (II) GEODE(0): Not using mode
> "504x255" (no mode of this name) (II) GEODE(0): Not using mode
> "304x190" (no mode of this name) (II) GEODE(0): Not using mode
> "248x248" (no mode of this name) (--) GEODE(0): Virtual size is
> 800x600 (pitch 1024) (**) GEODE(0): *Default mode "800x600": 40.0
> MHz, 37.9 kHz, 60.3 Hz (II) GEODE(0): Modeline "800x600"x60.3
> 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
> (**) GEODE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
> (II) GEODE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600
> 601 603 625 +hsync +vsync (35.2 kHz) (**) GEODE(0): *Default mode
> "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz (II) GEODE(0): Modeline
> "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync
> -vsync (31.5 kHz) (==) GEODE(0): DPI set to (96, 96) (II) Loading sub
> module "fb" (II) LoadModule: "fb"
>
> (II) Loading /usr/lib/xorg/modules//libfb.so
> (II) Module fb: vendor="X.Org Foundation"
> compiled for 1.5.2, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.4
> (II) Loading sub module "exa"
> (II) LoadModule: "exa"
>
> (II) Loading /usr/lib/xorg/modules//libexa.so
> (II) Module exa: vendor="X.Org Foundation"
> compiled for 1.5.2, module version = 2.4.0
> ABI class: X.Org Video Driver, version 4.1
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Module "ramdac" already built-in
> (--) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
> [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) GEODE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset
> is 0x0000 (II) GEODE(0): Found Geode 1000000 0xb6924000
> (II) EXA(0): Offscreen pixmap area of 11190784 bytes
> (II) EXA(0): Driver registered support for the following operations:
> (II) Solid
> (II) Copy
> (II) Composite (RENDER acceleration)
> (II) UploadToScreen
> (II) DownloadFromScreen
> (==) GEODE(0): Backing store disabled
> (**) Option "dpms"
> (**) GEODE(0): DPMS enabled
> (II) Loading sub module "shadow"
> (II) LoadModule: "shadow"
>
> (II) Loading /usr/lib/xorg/modules//libshadow.so
> (II) Module shadow: vendor="X.Org Foundation"
> compiled for 1.5.2, module version = 1.1.0
> ABI class: X.Org ANSI C Emulation, version 0.4
> (--) RandR disabled
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (II) Initializing built-in extension XEVIE
> (II) AIGLX: Screen 0 is not DRI capable
> (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> (**) Option "CoreKeyboard"
> (**) Generic Keyboard: always reports core events
> (**) Option "Protocol" "standard"
> (**) Generic Keyboard: Protocol: standard
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xorg"
> (**) Generic Keyboard: XkbRules: "xorg"
> (**) Option "XkbModel" "pc105"
> (**) Generic Keyboard: XkbModel: "pc105"
> (**) Option "XkbLayout" "gb"
> (**) Generic Keyboard: XkbLayout: "gb"
> (**) Option "CustomKeycodes" "off"
> (**) Generic Keyboard: CustomKeycodes disabled
> (**) Option "Protocol" "ImPS/2"
> (**) Configured Mouse: Device: "/dev/input/mice"
> (**) Configured Mouse: Protocol: "ImPS/2"
> (**) Option "CorePointer"
> (**) Configured Mouse: always reports core events
> (**) Option "Device" "/dev/input/mice"
> (**) Option "Emulate3Buttons" "false"
> (**) Option "ZAxisMapping" "4 5"
> (**) Configured Mouse: ZAxisMapping: buttons 4 and 5
> (**) Configured Mouse: Buttons: 9
> (**) Configured Mouse: Sensitivity: 1
> (II) evaluating device (Generic Keyboard)
> (II) XINPUT: Adding extended input device "Generic Keyboard" (type:
> KEYBOARD) (II) evaluating device (Configured Mouse)
> (II) XINPUT: Adding extended input device "Configured Mouse" (type:
> MOUSE) (II) Configured Mouse: ps2EnableDataReporting: succeeded
> Could not init font path element /usr/share/fonts/X11/cyrillic,
> removing from list! (II) config/hal: Adding input device Macintosh
> mouse button emulation (II) LoadModule: "evdev"
>
> (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
> (II) Module evdev: vendor="X.Org Foundation"
> compiled for 1.5.2, module version = 2.0.99
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 2.1
> (**) Macintosh mouse button emulation: always reports core events
> (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
> (II) Macintosh mouse button emulation: Found x and y relative axes
> (II) Macintosh mouse button emulation: Found 3 mouse buttons
> (II) Macintosh mouse button emulation: Configuring as mouse
> (II) XINPUT: Adding extended input device "Macintosh mouse button
> emulation" (type: MOUSE) (**) Macintosh mouse button emulation:
> YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation:
> EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout:
> 200 (II) config/hal: Adding input device CHICONY USB Keyboard (**)
> CHICONY USB Keyboard: always reports core events (**) CHICONY USB
> Keyboard: Device: "/dev/input/event1" (II) CHICONY USB Keyboard:
> Found keys (II) CHICONY USB Keyboard: Configuring as keyboard
> (II) XINPUT: Adding extended input device "CHICONY USB
> Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev"
> (**) CHICONY USB Keyboard: xkb_rules: "evdev"
> (**) Option "xkb_model" "pc105"
> (**) CHICONY USB Keyboard: xkb_model: "pc105"
> (**) Option "xkb_layout" "gb"
> (**) CHICONY USB Keyboard: xkb_layout: "gb"
> (II) config/hal: Adding input device PHILIPS MCE USB IR Receiver-
> Spinel plus (**) PHILIPS MCE USB IR Receiver- Spinel plus: always
> reports core events (**) PHILIPS MCE USB IR Receiver- Spinel plus:
> Device: "/dev/input/event3" (II) PHILIPS MCE USB IR Receiver- Spinel
> plus: Found keys (II) PHILIPS MCE USB IR Receiver- Spinel plus:
> Configuring as keyboard (II) XINPUT: Adding extended input device
> "PHILIPS MCE USB IR Receiver- Spinel plus" (type: KEYBOARD) (**)
> Option "xkb_rules" "evdev" (**) PHILIPS MCE USB IR Receiver- Spinel
> plus: xkb_rules: "evdev" (**) Option "xkb_model" "pc105"
> (**) PHILIPS MCE USB IR Receiver- Spinel plus: xkb_model: "pc105"
> (**) Option "xkb_layout" "gb"
> (**) PHILIPS MCE USB IR Receiver- Spinel plus: xkb_layout: "gb"
> (II) config/hal: Adding input device Microsoft Microsoft Basic
> Optical Mouse (**) Microsoft Microsoft Basic Optical Mouse: always
> reports core events (**) Microsoft Microsoft Basic Optical Mouse:
> Device: "/dev/input/event2" (II) Microsoft Microsoft Basic Optical
> Mouse: Found x and y relative axes (II) Microsoft Microsoft Basic
> Optical Mouse: Found 3 mouse buttons (II) Microsoft Microsoft Basic
> Optical Mouse: Configuring as mouse (II) XINPUT: Adding extended
> input device "Microsoft Microsoft Basic Optical Mouse" (type: MOUSE)
> (**) Microsoft Microsoft Basic Optical Mouse: YAxisMapping: buttons 4
> and 5 (**) Microsoft Microsoft Basic Optical Mouse:
> EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout:
> 200
>
> Backtrace:
> 0: /usr/X11R6/bin/X(xf86SigHandler+0x79) [0x80c3009]
> 1: [0xb8048400]
> 2: /usr/lib/xorg/modules/drivers//geode_drv.so [0xb7af439e]
> 3: /usr/lib/xorg/modules//libexa.so [0xb794578d]
> 4: /usr/X11R6/bin/X [0x817948d]
> 5: /usr/X11R6/bin/X(ProcPutImage+0x15e) [0x808951e]
> 6: /usr/X11R6/bin/X(Dispatch+0x34f) [0x808c89f]
> 7: /usr/X11R6/bin/X(main+0x47d) [0x8071d1d]
> 8: /lib/libc.so.6(__libc_start_main+0xe5) [0xb7c79685]
> 9: /usr/X11R6/bin/X [0x8071101]
> Saw signal 11. Server aborting.
> (II) UnloadModule: "kbd"
> (II) UnloadModule: "mouse"
> (II) Macintosh mouse button emulation: Close
> (II) UnloadModule: "evdev"
> (II) CHICONY USB Keyboard: Close
> (II) UnloadModule: "evdev"
> (II) PHILIPS MCE USB IR Receiver- Spinel plus: Close
> (II) UnloadModule: "evdev"
> (II) Microsoft Microsoft Basic Optical Mouse: Close
> (II) UnloadModule: "evdev"
>
>
> -- System Information:
> Debian Release: lenny/sid
> APT prefers intrepid-security
> APT policy: (500, 'intrepid-security'), (500, 'intrepid')
> Architecture: i386 (i586)
>
> Kernel: Linux 2.6.27-7-generic (SMP w/1 CPU core)
> Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/dash
>
> Versions of packages xserver-xorg-video-geode depends on:
> ii libc6 2.8~20080505-0ubuntu7 GNU C Library: Shared
> libraries ii xserver-xorg-core 2:1.5.2-2ubuntu3 Xorg X server
> - core server
>
> xserver-xorg-video-geode recommends no packages.
>
> -- no debconf information
>
Can you file this on launchpad? I know the system sent it to the users
mailing list, but it never gets worked if it stays here.
The right place to file bug reports is:
https://bugs.launchpad.net/ubuntu
That will give the developers a chance to see if they can fix it.
Thanks.
--
Charlie Kravetz
Linux Registered User Number 425914 [http://counter.li.org/]
Never let anyone steal your DREAM. [http://keepingdreams.com]
More information about the ubuntu-users
mailing list