[SOLVED] Re: Pinnacle PCTV HD Pro USB does not work under Ubuntu 8.04.

Fri May 2 01:26:11 UTC 2008

>  modprobe first, then compare the outputs and what happens at plugging
>  in ...

After modprobe em2880-dvb

[ 6119.213313] Linux video capture interface: v2.00
[ 6119.246496] em28xx v4l2 driver version 0.0.1 loaded
[ 6119.246537] usbcore: registered new interface driver em28xx
[ 6119.357175] Em28xx: Initialized (Em2880 DVB Extension) extension

After plug in the device:

[ 6209.773128] usb 8-4: new high speed USB device using ehci_hcd and address 3
[ 6209.913041] usb 8-4: configuration #1 chosen from 1 choice
[ 6209.913210] em28xx new video device (2304:0227): interface 0, class 255
[ 6209.913215] em28xx: device is attached to a USB 2.0 bus
[ 6209.913218] em28xx: you're using the experimental/unstable tree
from mcentral.de
[ 6209.913220] em28xx: there's also a stable tree available but which
is limited to
[ 6209.913222] em28xx: linux <=2.6.19.2
[ 6209.913224] em28xx: it's fine to use this driver but keep in mind
that it will move
[ 6209.913226] em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel
as soon as it's
[ 6209.913228] em28xx: proved to be stable
[ 6209.913231] em28xx #0: Alternate settings: 8
[ 6209.913233] em28xx #0: Alternate setting 0, max size= 0
[ 6209.913235] em28xx #0: Alternate setting 1, max size= 0
[ 6209.913237] em28xx #0: Alternate setting 2, max size= 1448
[ 6209.913239] em28xx #0: Alternate setting 3, max size= 2048
[ 6209.913241] em28xx #0: Alternate setting 4, max size= 2304
[ 6209.913243] em28xx #0: Alternate setting 5, max size= 2580
[ 6209.913245] em28xx #0: Alternate setting 6, max size= 2892
[ 6209.913247] em28xx #0: Alternate setting 7, max size= 3072
[ 6210.296285] input: em2880/em2870 remote control as
/devices/virtual/input/input7
[ 6210.336149] em28xx-input.c: remote control handler attached
[ 6210.336991] attach_inform: eeprom detected.
[ 6210.365768] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12
5c 03 8e 16 a4 1c
[ 6210.365788] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00
00 00 00 00 00 00
[ 6210.365797] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00
00 00 5b 1c 00 00
[ 6210.365821] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01
00 00 00 00 00 00
[ 6210.365838] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 6210.365854] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 6210.365870] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00
24 03 50 00 69 00
[ 6210.365887] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00
65 00 20 00 53 00
[ 6210.365903] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00
73 00 00 00 16 03
[ 6210.365921] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00
38 00 30 00 30 00
[ 6210.365939] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00
30 00 39 00 30 00
[ 6210.365951] em28xx #0: i2c eeprom b0: 31 00 30 00 38 00 31 00 33 00
35 00 35 00 00 00
[ 6210.365969] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 6210.365986] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 6210.366004] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 6210.366022] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 6210.366037] EEPROM ID= 0x9567eb1a
[ 6210.366039] Vendor/Product ID= 2304:0227
[ 6210.366041] AC97 audio (5 sample rates)
[ 6210.366043] 500mA max power
[ 6210.366045] Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[ 6210.368763] tuner 3-0061: chip found @ 0xc2 (em28xx #0)
[ 6210.368792] attach inform (default): detected I2C address c2
[ 6210.368798] /home/bpeng/temp/v4l-dvb-kernel/v4l/tuner-core.c:
setting tuner callback
[ 6210.368801] tuner 0x61: Configuration acknowledged
[ 6210.368804] /home/bpeng/temp/v4l-dvb-kernel/v4l/tuner-core.c:
setting tuner callback
[ 6210.368838] /home/bpeng/temp/v4l-dvb-kernel/v4l/xc3028-tuner.c:
attach request!
[ 6210.368841] /home/bpeng/temp/v4l-dvb-kernel/v4l/tuner-core.c:
xc3028 tuner successfully loaded
[ 6210.374895] attach_inform: tvp5150 detected.
[ 6210.436396] tvp5150 3-005c: tvp5150am1 detected.
[ 6210.526244] Loading base firmware: xc3028_init0.i2c.fw
[ 6211.481236] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
[ 6211.508172] xc3028-tuner.c: firmware 2.7
[ 6211.508177] ANALOG TV REQUEST
[ 6211.514501] em28xx #0: V4L2 device registered as /dev/video0
[ 6211.514505] em2880-dvb.c: DVB Init
[ 6211.514511] Loading base firmware: xc3028_8MHz_init0.i2c.fw
[ 6211.542115] em28xx_audio: no version for "snd_pcm_new" found: kernel tainted.
[ 6212.580589] Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
[ 6212.608525] xc3028-tuner.c: firmware 2.7
[ 6212.608531] Sending extra call for Digital TV!
[ 6212.744937] /home/bpeng/temp/v4l-dvb-kernel/v4l/xc3028-tuner.c:
attach request!
[ 6212.744944] DVB: registering new adapter (em2880 DVB-T)
[ 6212.744948] DVB: registering frontend 0 (LG Electronics LGDT3303
VSB/QAM Frontend)...
[ 6212.745172] em28xx #0: Found Pinnacle PCTV HD Pro
[ 6212.745175] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 6212.745179] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 6212.745240] general protection fault: 0000 [1] SMP
[ 6212.745245] CPU 0
[ 6212.745247] Modules linked in: lgdt330x em28xx_audio(F) tvp5150
qt1010 mt2060 xc3028_tuner mt352 zl10353 tuner em2880_dvb em28xx
compat_ioctl32 ir_common videodev v4l2_common v4l1_compat tveeprom
dvb_core ipv6 af_packet rfcomm l2cap bluetooth ppdev acpi_cpufreq
cpufreq_ondemand cpufreq_powersave cpufreq_conservative
cpufreq_userspace cpufreq_stats freq_table container sbs video output
dock sbshc battery iptable_filter ip_tables x_tables ac parport_pc lp
parport joydev snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm
snd_page_alloc snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi
snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd
serio_raw nvidia(P) usbhid dcdbas pcspkr iTCO_wdt psmouse evdev
iTCO_vendor_support soundcore hid i2c_core e1000e shpchp pci_hotplug
button intel_agp usb_storage ext3 jbd mbcache libusual sg sr_mod cdrom
sd_mod ata_piix ata_generic floppy pata_acpi libata scsi_mod ehci_hcd
uhci_hcd usbcore thermal processor fan fbcon tileblit font bitblit
softcursor fuse
[ 6212.745360] Pid: 7529, comm: modprobe Tainted: PF       2.6.24-16-generic #1
[ 6212.745363] RIP: 0010:[<ffffffff88addbec>]  [<ffffffff88addbec>]
:snd_pcm:snd_pcm_timer_init+0x2c/0x1a0
[ 6212.745376] RSP: 0018:ffff8100a0607ce8  EFLAGS: 00010202
[ 6212.745379] RAX: 0000000000000000 RBX: ffff8100a06a6000 RCX: ffff8100a0607d00
[ 6212.745381] RDX: 0000000000000001 RSI: ffffffff88adf648 RDI: 2320787838326d65
[ 6212.745384] RBP: ffff8100a0498e00 R08: 0000000000000000 R09: ffff8100a9d25408
[ 6212.745387] R10: 0000000000000000 R11: ffffffff803b6e00 R12: 0000000000000018
[ 6212.745389] R13: ffff8100a0498e58 R14: 0000000000000001 R15: ffffffff88adee48
[ 6212.745392] FS:  00007f9c9afb86e0(0000) GS:ffffffff805b0000(0000)
knlGS:0000000000000000
[ 6212.745395] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 6212.745397] CR2: 00007f88a24ce000 CR3: 00000000a8862000 CR4: 00000000000006e0
[ 6212.745400] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6212.745402] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 6212.745405] Process modprobe (pid: 7529, threadinfo
ffff8100a0606000, task ffff8100bbeee7c0)
[ 6212.745408] Stack:  0000000000000003 0000000000000000
ffff8100a0498e00 0000000000000018
[ 6212.745415]  ffff8100a06a6000 ffffffff88ad47dd ffff8100a04b7000
ffffffff802f3068
[ 6212.745423]  63304431436d6370 ffff8100a0498e00 0000000100000001
ffff8100a9c3eb40
[ 6212.745428] Call Trace:
[ 6212.745438]  [<ffffffff88ad47dd>] :snd_pcm:snd_pcm_dev_register+0xfd/0x220
[ 6212.745444]  [<ffffffff802f3068>] create_proc_entry+0x58/0xa0
[ 6212.745459]  [<ffffffff88a7fc9f>] :snd:snd_device_register_all+0x2f/0x60
[ 6212.745467]  [<ffffffff88a7ab8b>] :snd:snd_card_register+0x3b/0x390
[ 6212.745475]  [<ffffffff88ad49e3>] :snd_pcm:snd_pcm_new+0xe3/0x140
[ 6212.745483]  [<ffffffff88cf1210>] :em28xx_audio:em28xx_audio_init+0x170/0x1d0
[ 6212.745493]  [<ffffffff88ca11dd>] :em28xx:em28xx_register_extension+0x5d/0x90
[ 6212.745499]  [<ffffffff80263b6e>] sys_init_module+0x18e/0x1a90
[ 6212.745523]  [<ffffffff8020c37e>] system_call+0x7e/0x83
[ 6212.745532]
[ 6212.745534]
[ 6212.745535] Code: 48 8b 07 8b 00 89 44 24 08 8b 47 18 89 44 24 0c
8b 43 18 01
[ 6212.745552] RIP  [<ffffffff88addbec>] :snd_pcm:snd_pcm_timer_init+0x2c/0x1a0
[ 6212.745560]  RSP <ffff8100a0607ce8>
[ 6212.745564] ---[ end trace 3703c39e3ee52570 ]---

Cheers,
Bo