linux-image-2.6.24-12-generic: during the boot sequence the system become
Christian Leutloff
christian.leutloff at web.de
Sun Mar 16 22:36:58 UTC 2008
Package: linux-image-2.6.24-12-generic
Version: 2.6.24-12.22
Severity: critical
Justification: breaks the whole system
After updating from gutsy to hardy my system stops booting. After some
time the system freeze totally. Remote connection via ssh is not
possible and the gdm does not come up.
Using the old gutsy kernel version 2.6.22 the system is fine and I'm able to write this
bug report.
The bug was already present in linux-image-2.6.24-11-generic.
Using the latest Knoppix Live CD my system does a successful boot using
the 2.6.24 kernel.
I'm appending the lspci outputs and the saved dmesg output. But the kernel
specific boot up sequence looks similar to a successful 2.6.22 boot. I'm
using the X.org nv driver and not the NVIDIA one.
I do not know where to look to track the problem down 8-((
What can I do?
TiA
Christian
-- System Information:
Debian Release: lenny/sid
APT prefers hardy-updates
APT policy: (500, 'hardy-updates'), (500, 'hardy-security'), (500, 'hardy')
Architecture: i386 (i686)
Kernel: Linux 2.6.22-14-generic (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.24-12-generic depends on:
ii coreutils [fileutils] 6.10-3ubuntu1 The GNU core utilities
ii dpkg 1.14.16.6ubuntu3 package maintenance system for Deb
ii fileutils 5.97-5.3ubuntu3 The GNU file management utilities
ii initramfs-tools 0.85eubuntu32 tools for generating an initramfs
ii module-init-tools 3.3-pre11-4ubuntu5 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-12-generic recommends:
ii grub 0.97-29ubuntu18 GRand Unified Bootloader
-- no debconf information
# lspci -vv
00:00.0 Host bridge: ALi Corporation M1671 Super P4 Northbridge
[AGP4X,PCI and SDR/DDR] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [b0] AGP version 2.0
Status: RQ=28 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [a4] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e1000000-e1ffffff
Prefetchable memory behind bridge: e8000000-efffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
Controller Audio Device (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 1018
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR+ <PERR+
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at e0000000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: ALi Corporation M1533/M1535 PCI to ISA Bridge
[Aladdin IV/V/V+]
Subsystem: Acer Incorporated [ALI] Unknown device 102b
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller (prog-if 00
[Generic])
Subsystem: Acer Incorporated [ALI] Unknown device 102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0001000 (32-bit, non-prefetchable)
[size=4K]
Region 1: I/O ports at 1c00 [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Acer Incorporated [ALI] Unknown device 102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at e0002000 (32-bit, non-prefetchable)
[size=256]
[virtual] Expansion ROM at 40000000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0002800 (32-bit, non-prefetchable)
[size=2K]
Region 1: I/O ports at 2400 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0003000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if 8a
[Master SecP PriP])
Subsystem: Acer Incorporated [ALI] Unknown device 102b
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 0: [virtual] Memory at 000001f0 (32-bit,
non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3,
non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit,
non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3,
non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 2480 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
Subsystem: Acer Incorporated [ALI] Unknown device 102b
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:13.0 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus
Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40010000 (32-bit, non-prefetchable)
[size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 30000000-33fff000 (prefetchable)
Memory window 1: 34000000-37fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
PostWrite+
16-bit legacy interface ports at 0001
00:13.1 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus
Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40011000 (32-bit, non-prefetchable)
[size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 38000000-3bfff000 (prefetchable)
Memory window 1: 3c000000-3ffff000
I/O window 0: 00002800-000028ff
I/O window 1: 00002c00-00002cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
PostWrite+
16-bit legacy interface ports at 0001
00:14.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0004000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 Go]
(rev b2) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Unknown device 102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e1000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
# lspci -vvn
00:00.0 0600: 10b9:1671 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [b0] AGP version 2.0
Status: RQ=28 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [a4] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 0604: 10b9:5247 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e1000000-e1ffffff
Prefetchable memory behind bridge: e8000000-efffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:06.0 0401: 10b9:5451 (rev 02)
Subsystem: 1025:1018
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR+ <PERR+
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at e0000000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 0601: 10b9:1533
Subsystem: 1025:102b
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 0703: 10b9:5457 (prog-if 00 [Generic])
Subsystem: 1025:102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0001000 (32-bit, non-prefetchable)
[size=4K]
Region 1: I/O ports at 1c00 [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 0200: 10ec:8139 (rev 10)
Subsystem: 1025:102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at e0002000 (32-bit, non-prefetchable)
[size=256]
[virtual] Expansion ROM at 40000000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 0c00: 1106:3044 (rev 46) (prog-if 10 [OHCI])
Subsystem: 1106:3044
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0002800 (32-bit, non-prefetchable)
[size=2K]
Region 1: I/O ports at 2400 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 0c03: 10b9:5237 (rev 03) (prog-if 10 [OHCI])
Subsystem: 1025:102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0003000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 0101: 10b9:5229 (rev c4) (prog-if 8a [Master SecP PriP])
Subsystem: 1025:102b
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 0: [virtual] Memory at 000001f0 (32-bit,
non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3,
non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit,
non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3,
non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 2480 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 0680: 10b9:7101
Subsystem: 1025:102b
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:13.0 0607: 1217:6933 (rev 02)
Subsystem: 1025:102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40010000 (32-bit, non-prefetchable)
[size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 30000000-33fff000 (prefetchable)
Memory window 1: 34000000-37fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
PostWrite+
16-bit legacy interface ports at 0001
00:13.1 0607: 1217:6933 (rev 02)
Subsystem: 1025:102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40011000 (32-bit, non-prefetchable)
[size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 38000000-3bfff000 (prefetchable)
Memory window 1: 3c000000-3ffff000
I/O window 0: 00002800-000028ff
I/O window 1: 00002c00-00002cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
PostWrite+
16-bit legacy interface ports at 0001
00:14.0 0c03: 10b9:5237 (rev 03) (prog-if 10 [OHCI])
Subsystem: 1025:102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0004000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 0300: 10de:0112 (rev b2) (prog-if 00 [VGA controller])
Subsystem: 1025:102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e1000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
# zcat dmesg.1.gz
[ 0.000000] Linux version 2.6.24-12-generic (buildd at palmer) (gcc
version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 23:01:54 UTC
2008 (Ubuntu 2.6.24-12.22-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000d8000 - 00000000000e0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
[ 0.000000] BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI
data)
[ 0.000000] BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000
(reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000
(reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 130800) 0 entries of 256
used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130800
[ 0.000000] HighMem 130800 -> 130800
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130800
[ 0.000000] On node 0 totalpages: 130800
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 989 pages used for memmap
[ 0.000000] Normal zone: 125715 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6D90 checksum 0
[ 0.000000] ACPI: RSDP 000F6D90, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 1FEFA663, 0030 (r1 PTLTD RSDT 6040000
LTP 0)
[ 0.000000] ACPI: FACP 1FEFEEAF, 0074 (r1 ALI M1533 6040000
PTL F4240)
[ 0.000000] ACPI: DSDT 1FEFA693, 481C (r1 ALI M1533 6040000
MSFT 100000D)
[ 0.000000] ACPI: FACS 1FEFFFC0, 0040
[ 0.000000] ACPI: BOOT 1FEFEF23, 0028 (r1 PTLTD $SBFTBL$ 6040000
LTP 1)
[ 0.000000] ACPI: SSDT 1FEFEF4B, 00B5 (r1 PTLTD ACPIPST1 6040000
LTP 1)
[ 0.000000] ACPI: DMI detected: Acer
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dffc0000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000
- 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000
- 00000000000d8000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d8000
- 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000
- 00000000000e4000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000
- 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 129779
[ 0.000000] Kernel command line: root=/dev/hda2 vga=791 quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with
"lapic"
[ 0.000000] mapped APIC to ffffb000 (0140d000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1195.604 MHz processor.
[ 26.017834] Console: colour dummy device 80x25
[ 26.017843] console [tty0] enabled
[ 26.018359] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 26.018854] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 26.043018] Memory: 506260k/523200k available (2164k kernel code,
16316k reserved, 1007k data, 364k init, 0k highmem)
[ 26.043036] virtual kernel memory layout:
[ 26.043038] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 26.043040] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 26.043043] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 26.043045] lowmem : 0xc0000000 - 0xdfef0000 ( 510 MB)
[ 26.043048] .init : 0xc041f000 - 0xc047a000 ( 364 kB)
[ 26.043050] .data : 0xc031d1bd - 0xc0418dc4 (1007 kB)
[ 26.043052] .text : 0xc0100000 - 0xc031d1bd (2164 kB)
[ 26.043059] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 26.043133] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[ 26.123134] Calibrating delay using timer specific routine.. 2394.46
BogoMIPS (lpj=4788923)
[ 26.123183] Security Framework initialized
[ 26.123197] SELinux: Disabled at boot.
[ 26.123227] AppArmor: AppArmor initialized
[ 26.123236] Failure registering capabilities with primary security
module.
[ 26.123256] Mount-cache hash table entries: 512
[ 26.123528] CPU: After generic identify, caps: bfebf9ff 00000000
00000000 00000000 00000400 00000000 00000000 00000000
[ 26.123557] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 26.123563] CPU: L2 cache: 512K
[ 26.123568] CPU: Hyper-Threading is disabled
[ 26.123574] CPU: After all inits, caps: bfebf9ff 00000000 00000000
0000b080 00000400 00000000 00000000 00000000
[ 26.123598] Compat vDSO mapped to ffffe000.
[ 26.123624] Checking 'hlt' instruction... OK.
[ 26.139875] SMP alternatives: switching to UP code
[ 26.143088] Freeing SMP alternatives: 11k freed
[ 26.143389] Early unpacking initramfs... done
[ 26.877635] ACPI: Core revision 20070126
[ 26.877743] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[ 26.880840] ACPI: setting ELCR to 0200 (from 0c00)
[ 26.959738] CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz
stepping 07
[ 26.959753] SMP motherboard not detected.
[ 26.959758] Local APIC not detected. Using dummy APIC emulation.
[ 26.959851] Brought up 1 CPUs
[ 26.959888] CPU0 attaching sched-domain:
[ 26.959895] domain 0: span 01
[ 26.959899] groups: 01
[ 26.960318] net_namespace: 64 bytes
[ 26.960338] Booting paravirtualized kernel on bare hardware
[ 26.961782] Time: 10:21:05 Date: 03/15/08
[ 26.961907] NET: Registered protocol family 16
[ 26.962410] EISA bus registered
[ 26.962439] ACPI: bus type pci registered
[ 26.972445] PCI: PCI BIOS revision 2.10 entry at 0xfd58e, last bus=3
[ 26.972451] PCI: Using configuration type 1
[ 26.972456] Setting up standard PCI resources
[ 26.993617] ACPI: EC: Look up EC in DSDT
[ 27.031794] ACPI: Interpreter enabled
[ 27.031802] ACPI: (supports S0 S3 S4 S5)
[ 27.031828] ACPI: Using PIC for interrupt routing
[ 27.032854] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 27.899626] ACPI: EC: GPE = 0x22, I/O: command/status = 0x66, data =
0x62
[ 27.899635] ACPI: EC: driver started in interrupt mode
[ 27.899736] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 27.900606] PCI quirk: region 8000-803f claimed by ali7101 ACPI
[ 27.900613] PCI quirk: region 8040-805f claimed by ali7101 SMB
[ 27.901223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 27.904265] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[ 27.904518] ACPI: PCI Interrupt Link [LNKB] (IRQs 11) *0, disabled.
[ 27.904770] ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *11
[ 27.905014] ACPI: PCI Interrupt Link [LNKD] (IRQs 11) *0, disabled.
[ 27.905256] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11
[ 27.905498] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[ 27.905742] ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *11
[ 27.905981] ACPI: PCI Interrupt Link [LNKH] (IRQs 11) *10
[ 27.906244] ACPI: PCI Interrupt Link [LNKU] (IRQs 10) *11
[ 27.906526] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 27.906607] pnp: PnP ACPI init
[ 27.906625] ACPI: bus type pnp registered
[ 28.402246] pnp: PnP ACPI: found 12 devices
[ 28.402252] ACPI: ACPI bus type pnp unregistered
[ 28.402262] PnPBIOS: Disabled by ACPI PNP
[ 28.402843] PCI: Using ACPI for IRQ routing
[ 28.402850] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 28.421952] NET: Registered protocol family 8
[ 28.421957] NET: Registered protocol family 20
[ 28.422116] AppArmor: AppArmor Filesystem Enabled
[ 28.425928] Time: tsc clocksource has been installed.
[ 28.434031] system 00:07: ioport range 0x3810-0x381f has been
reserved
[ 28.434038] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 28.434044] system 00:07: ioport range 0x8000-0x805f could not be
reserved
[ 28.434050] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 28.434055] system 00:07: ioport range 0x480-0x48f has been reserved
[ 28.434060] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 28.434066] system 00:07: ioport range 0xfe10-0xfe11 has been
reserved
[ 28.434073] system 00:07: iomem range 0xfffc0000-0xffffffff could not
be reserved
[ 28.434080] system 00:07: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 28.465150] PCI: Failed to allocate mem resource #6:10000 at f0000000
for 0000:01:00.0
[ 28.465157] PCI: Bridge: 0000:00:01.0
[ 28.465160] IO window: disabled.
[ 28.465170] MEM window: e1000000-e1ffffff
[ 28.465178] PREFETCH window: e8000000-efffffff
[ 28.465188] PCI: Bus 2, cardbus bridge: 0000:00:13.0
[ 28.465193] IO window: 00001000-000010ff
[ 28.465200] IO window: 00001400-000014ff
[ 28.465208] PREFETCH window: 30000000-33ffffff
[ 28.465215] MEM window: 34000000-37ffffff
[ 28.465223] PCI: Bus 6, cardbus bridge: 0000:00:13.1
[ 28.465227] IO window: 00002800-000028ff
[ 28.465234] IO window: 00002c00-00002cff
[ 28.465241] PREFETCH window: 38000000-3bffffff
[ 28.465249] MEM window: 3c000000-3fffffff
[ 28.465269] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 28.465640] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 28.465646] PCI: setting IRQ 11 as level-triggered
[ 28.465652] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKB] -> GSI
11 (level, low) -> IRQ 11
[ 28.465665] PCI: Setting latency timer of device 0000:00:13.0 to 64
[ 28.465685] ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKB] -> GSI
11 (level, low) -> IRQ 11
[ 28.465696] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 28.465723] NET: Registered protocol family 2
[ 28.502095] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 28.502753] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 28.502898] TCP bind hash table entries: 16384 (order: 5, 131072
bytes)
[ 28.503041] TCP: Hash tables configured (established 16384 bind
16384)
[ 28.503046] TCP reno registered
[ 28.514184] checking if image is initramfs...<7>Switched to high
resolution mode on CPU 0
[ 29.195215] it is
[ 29.947520] Freeing initrd memory: 7690k freed
[ 29.947871] Simple Boot Flag at 0x37 set to 0x1
[ 29.948624] audit: initializing netlink socket (disabled)
[ 29.948654] audit(1205576467.784:1): initialized
[ 29.953610] VFS: Disk quotas dquot_6.5.1
[ 29.953803] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 29.954131] io scheduler noop registered
[ 29.954136] io scheduler anticipatory registered
[ 29.954140] io scheduler deadline registered
[ 29.954167] io scheduler cfq registered (default)
[ 29.954189] Activating ISA DMA hang workarounds.
[ 30.172838] Boot video device is 0000:01:00.0
[ 30.173475] isapnp: Scanning for PnP cards...
[ 30.528508] isapnp: No Plug & Play device found
[ 30.598042] Real Time Clock Driver v1.12ac
[ 30.598254] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 30.598514] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 30.598829] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 30.600389] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 30.601202] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[ 30.601210] PCI: setting IRQ 10 as level-triggered
[ 30.601216] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKG] -> GSI
10 (level, low) -> IRQ 10
[ 30.601235] ACPI: PCI interrupt for device 0000:00:08.0 disabled
[ 30.602822] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 30.602984] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 30.603260] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at
0x60,0x64 irq 1,12
[ 30.606400] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 30.606411] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 30.616692] mice: PS/2 mouse device common for all mice
[ 30.616989] EISA: Probing bus 0 at eisa.0
[ 30.617005] Cannot allocate resource for EISA slot 1
[ 30.617009] Cannot allocate resource for EISA slot 2
[ 30.617015] Cannot allocate resource for EISA slot 3
[ 30.617048] Cannot allocate resource for EISA slot 8
[ 30.617052] EISA: Detected 0 cards.
[ 30.617060] cpuidle: using governor ladder
[ 30.617064] cpuidle: using governor menu
[ 30.617263] NET: Registered protocol family 1
[ 30.617333] Using IPI No-Shortcut mode
[ 30.617404] registered taskstats version 1
[ 30.617594] Magic number: 0:988:375
[ 30.617823] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 30.617827] EDD information not available.
[ 30.618468] Freeing unused kernel memory: 364k freed
[ 30.652581] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 32.158075] fuse init (API version 7.9)
[ 32.216649] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 32.216665] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 32.226838] ACPI: Thermal Zone [THRS] (44 C)
[ 32.234598] ACPI: Thermal Zone [THRC] (44 C)
[ 33.874633] 8139too Fast Ethernet driver 0.9.28
[ 33.875141] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 33.875149] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI
10 (level, low) -> IRQ 10
[ 33.876210] eth0: RealTek RTL8139 at 0x2000, d0:00:07:39:06:94, IRQ
10
[ 33.876217] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 33.931264] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 34.094997] usbcore: registered new interface driver usbfs
[ 34.095057] usbcore: registered new interface driver hub
[ 34.123247] SCSI subsystem initialized
[ 34.150495] usbcore: registered new device driver usb
[ 34.167131] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 34.167143] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI
10 (level, low) -> IRQ 10
[ 34.219141] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]
MMIO=[e0002800-e0002fff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 34.325432] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[ 34.354294] libata version 3.00 loaded.
[ 34.451148] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[ 34.451159] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKE] -> GSI
10 (level, low) -> IRQ 10
[ 34.451190] ohci_hcd 0000:00:0f.0: OHCI Host Controller
[ 34.451830] ohci_hcd 0000:00:0f.0: new USB bus registered, assigned
bus number 1
[ 34.451863] ohci_hcd 0000:00:0f.0: irq 10, io mem 0xe0003000
[ 34.508501] usb usb1: configuration #1 chosen from 1 choice
[ 34.508562] hub 1-0:1.0: USB hub found
[ 34.508580] hub 1-0:1.0: 2 ports detected
[ 34.610717] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
[ 34.610728] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKU] -> GSI
10 (level, low) -> IRQ 10
[ 34.610758] ohci_hcd 0000:00:14.0: OHCI Host Controller
[ 34.610830] ohci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 2
[ 34.610858] ohci_hcd 0000:00:14.0: irq 10, io mem 0xe0004000
[ 34.668387] usb usb2: configuration #1 chosen from 1 choice
[ 34.668451] hub 2-0:1.0: USB hub found
[ 34.668468] hub 2-0:1.0: 2 ports detected
[ 34.770472] ACPI: Unable to derive IRQ for device 0000:00:10.0
[ 34.770577] ACPI: Unable to derive IRQ for device 0000:00:10.0
[ 34.795506] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 34.796510] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 34.800352] ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc4) at PCI
slot 0000:00:10.0
[ 34.800378] ACPI: Unable to derive IRQ for device 0000:00:10.0
[ 34.800394] ALI15X3: not 100% native mode: will probe irqs later
[ 34.800429] ALI15X3: simplex device: DMA forced
[ 34.800443] ide0: BM-DMA at 0x2480-0x2487, BIOS settings:
hda:DMA, hdb:pio
[ 34.800470] ide1: BM-DMA at 0x2488-0x248f, BIOS settings:
hdc:DMA, hdd:pio
[ 34.800492] Probing IDE interface ide0...
[ 34.902023] usb 1-1: new low speed USB device using ohci_hcd and
address 2
[ 35.117035] usb 1-1: configuration #1 chosen from 1 choice
[ 35.721714] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00110600000e576f]
[ 35.757703] hda: IC25N030ATCS04-0, ATA DISK drive
[ 35.757769] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 35.757989] hda: host side 80-wire cable detection failed, limiting
max speed to UDMA33
[ 35.757995] hda: UDMA/33 mode selected
[ 35.758254] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 35.777926] Probing IDE interface ide1...
[ 35.909961] usbcore: registered new interface driver hiddev
[ 35.916682] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:0f.0/usb1/1-1/1-1:1.0/input/input2
[ 35.929416] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2
Optical Mouse] on usb-0000:00:0f.0-1
[ 35.929453] usbcore: registered new interface driver usbhid
[ 35.929462] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 36.456986] Clocksource tsc unstable (delta = -123773588 ns)
[ 36.461007] Time: acpi_pm clocksource has been installed.
[ 37.173001] hdc: SONY CD-RW/DVD-ROM CRX820E, ATAPI CD/DVD-ROM drive
[ 37.173071] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 37.173142] hdc: UDMA/33 mode selected
[ 37.173502] ide1 at 0x170-0x177,0x376 on irq 15
[ 37.207339] hda: max request size: 128KiB
[ 37.210053] hda: 58605120 sectors (30005 MB) w/1768KiB Cache,
CHS=58140/16/63
[ 37.210066] hda: cache flushes not supported
[ 37.210136] hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 >
[ 37.318856] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 8192kB Cache
[ 37.318876] Uniform CD-ROM driver Revision: 3.20
[ 37.537578] floppy0: no floppy controllers found
[ 38.226688] kjournald starting. Commit interval 5 seconds
[ 38.226719] EXT3-fs: mounted filesystem with ordered data mode.
[ 51.741399] input: PC Speaker as
/devices/platform/pcspkr/input/input3
[ 52.623359] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1,
caps: 0x904713/0x4000
[ 52.659544] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input4
[ 53.558524] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 53.743945] Linux agpgart interface v0.102
[ 53.800802] agpgart: Detected ALi M1671 chipset
[ 53.813970] agpgart: AGP aperture is 128M @ 0xf0000000
[ 53.943703] parport_pc 00:08: reported by Plug and Play ACPI
[ 53.943858] parport0: PC-style at 0x378 (0x778), irq 7, dma 0
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 54.165868] ACPI: WMI-Acer: Mapper loaded
[ 54.315699] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[ 54.471602] Yenta: CardBus bridge found at 0000:00:13.0 [1025:102b]
[ 54.471636] Yenta O2: res at 0x94/0xD4: ea/00
[ 54.471642] Yenta O2: enabling read prefetch/write burst
[ 54.599892] Yenta: ISA IRQ mask 0x0038, PCI irq 11
[ 54.599902] Socket status: 30000006
[ 54.643413] Yenta: CardBus bridge found at 0000:00:13.1 [1025:102b]
[ 54.701299] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
[ 54.701331] acer_acpi: No or unsupported WMI interface, unable to
load.
[ 54.767593] ACPI: AC Adapter [AC] (on-line)
[ 54.772401] Yenta: ISA IRQ mask 0x0038, PCI irq 11
[ 54.772409] Socket status: 30000410
[ 54.803011] ACPI: Battery Slot [BAT0] (battery present)
[ 54.931411] input: Power Button (FF) as /devices/virtual/input/input5
[ 54.947202] ACPI: Power Button (FF) [PWRF]
[ 54.947386] input: Power Button (CM) as /devices/virtual/input/input6
[ 54.959150] ACPI: Power Button (CM) [PWRB]
[ 54.959327] input: Sleep Button (CM) as /devices/virtual/input/input7
[ 54.975144] ACPI: Sleep Button (CM) [SLPB]
[ 54.975331] input: Lid Switch as /devices/virtual/input/input8
[ 54.975459] ACPI: Lid Switch [LID]
[ 55.091049] floppy0: no floppy controllers found
[ 55.414830] pccard: PCMCIA card inserted into slot 1
[ 58.264043] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:08/LNXVIDEO:00/input/input9
[ 58.285136] ACPI: Video Device [VGA] (multi-head: yes rom: no post:
no)
[ 58.741249] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 58.741259] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI
11 (level, low) -> IRQ 11
[ 62.750176] cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207
0x220-0x22f 0x330-0x337 0x388-0x38f 0x3c0-0x3df
[ 62.755037] cs: IO port probe 0x800-0x8ff: clean.
[ 62.756488] cs: IO port probe 0xc00-0xcff: clean.
[ 62.758185] cs: IO port probe 0xa00-0xaff: clean.
[ 62.767648] cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207
0x220-0x22f 0x330-0x337 0x388-0x38f 0x3c0-0x3df
[ 62.772442] cs: IO port probe 0x800-0x8ff: clean.
[ 62.773919] cs: IO port probe 0xc00-0xcff: clean.
[ 62.775612] cs: IO port probe 0xa00-0xaff: clean.
[ 62.777384] cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 62.796307] pcmcia: registering new device pcmcia1.0
[ 63.594974] usbcore: registered new interface driver libusual
[ 63.606851] Initializing USB Mass Storage driver...
[ 63.606928] usbcore: registered new interface driver usb-storage
[ 63.606935] USB Mass Storage support registered.
[ 63.684451] lp0: using parport0 (interrupt-driven).
[ 42.645255] Marking TSC unstable due to: cpufreq changes.
[ 42.738420] PPP generic driver version 2.4.2
[ 42.793855] loop: module loaded
[ 42.854975] tun: Universal TUN/TAP device driver, 1.6
[ 42.854982] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 42.942010] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[ 42.948512] usbcore: registered new interface driver ndiswrapper
[ 43.163030] Unable to find swap-space signature
[ 43.507778] EXT3 FS on hda2, internal journal
[ 43.749708] device-mapper: uevent: version 1.0.3
[ 43.749759] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02)
initialised: dm-devel at redhat.com
[ 44.857419] kjournald starting. Commit interval 5 seconds
[ 44.857929] EXT3 FS on hda5, internal journal
[ 44.857937] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.939276] kjournald starting. Commit interval 5 seconds
[ 44.942762] EXT3 FS on hda6, internal journal
[ 44.942770] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.988038] kjournald starting. Commit interval 5 seconds
[ 44.991858] EXT3 FS on hda7, internal journal
[ 44.991865] EXT3-fs: mounted filesystem with ordered data mode.
[ 45.541127] Unable to find swap-space signature
[ 48.368866] NET: Registered protocol family 15
[ 48.765599] padlock: VIA PadLock Hash Engine not detected.
[ 48.937505] padlock: VIA PadLock Hash Engine not detected.
[ 55.984211] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 56.381642] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 57.595032] NET: Registered protocol family 10
[ 57.595568] lo: Disabled Privacy Extensions
More information about the ubuntu-users
mailing list