starting Streamzap IR Remote Control when booting

[GVG GVG]

any chance to draw some attention to this issue?

Thanks

George

On Mon, Jul 7, 2008 at 3:58 PM, GVG GVG <gvgter at googlemail.com> wrote:

> Dear List,
>
> I run a Kubuntu 8.04 and attached a Streamzap IR Remote Control unit. My
> problem is that when booting the system, the connected Streamzap USB IR unit
> doesn't get recognized. I have to unplug and re-plug it in order to make it
> work! How can I correct that?
>
> Here is the dmesg output:
>
> --------------
> [   58.459732] lirc_dev: IR Remote Control driver registered, at major 61
> [   58.571493] lirc_streamzap[-1]: Streamzap, Inc. Streamzap Remote Control
> on usb4:3 attached
> [   58.571508] lirc_dev: lirc_register_plugin: sample_rate: 0
> [   58.571695] usbcore: registered new interface driver lirc_streamzap
> [   58.571707] lirc_streamzap $Revision: 1.22 $ registered
> [  194.074561] lirc_atiusb: USB remote driver for LIRC $Revision: 1.61 $
> [  194.074575] lirc_atiusb: Paul Miller <pmiller9 at users.sourceforge.net>
> [  194.084676] usbcore: registered new interface driver lirc_atiusb
> [  223.263021] lirc_mceusb2: Philips eHome USB IR Transciever and Microsoft
> MCE 2005 Remote Control driver for LI
> RC $Revision: 1.33 $
> [  223.263038] lirc_mceusb2: Daniel Melander <lirc at rajidae.se>, Martin
> Blatter <martin_a_blatter at yahoo.com>
> [  223.273240] usbcore: registered new interface driver lirc_mceusb2
> [  273.124061] lirc_igorplugusb: USB remote driver for LIRC v0.1
> [  273.124074] lirc_igorplugusb: Jan M. Hochstein <
> hochstein at algo.informatik.tu-darmstadt.de>
> [  273.134231] usbcore: registered new interface driver lirc_igorplugusb
> [  346.719505] lirc_serial: port 03f8 already in use
> [  346.719521] lirc_serial: use 'setserial /dev/ttySX uart none'
> [  346.719529] lirc_serial: or compile the serial port driver as module and
> [  346.719537] lirc_serial: make sure this module is loaded first
> [  358.385179] lirc_serial: port 03f8 already in use
> [  358.385195] lirc_serial: use 'setserial /dev/ttySX uart none'
> [  358.385203] lirc_serial: or compile the serial port driver as module and
> [  358.385210] lirc_serial: make sure this module is loaded first
> ------------------------
>
> Thanks for your help
>
> George
>
> PS: Please notice that I did post that request in the Kubuntu list but had
> no luck receiving any response!
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-users/attachments/20080710/15e9dfc6/attachment.html>