Video driver problem on upgrade to Hardy

[Paolo]

NoOp wrote:
> Post your xorg.conf please.

This is the file I was using this afternoon, (It will have been changed since by 
the installation of the proprietary ATI driver from 
http://ati.amd.com/support/drivers/linux/linux-radeon.html
--which has not resolved anything, but at least it has not made anything worse).

Here you go:

Section "ServerLayout"
	Identifier	"Default Layout"
   screen 0 "Default Screen" 0 0
	Inputdevice	"Synaptics Touchpad"
EndSection

Section "Files"
EndSection

Section "Module"
	Load		"glx"
	Load		"GLcore"
	Load		"v4l"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"	"/dev/psaux"
	Option		"Protocol"	"auto-dev"
	Option		"HorizEdgeScroll"	"0"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Vendorname	"Generic LCD Display"
	Modelname	"LCD Panel 1920x1200"
	Horizsync	31.5-74.5
	Vertrefresh	56.0 - 65.0
   modeline  "800x600 at 56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
   modeline  "800x600 at 60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
   modeline  "1280x768 at 60" 80.14 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
   modeline  "1280x720 at 60" 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
   modeline  "1280x800 at 60" 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
   modeline  "1440x900 at 60" 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync
   modeline  "1600x1024 at 60" 136.36 1600 1704 1872 2144 1024 1025 1028 1060 
-hsync +vsync
   modeline  "1680x1050 at 60" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 
-hsync +vsync
   modeline  "1920x1200 at 60" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 
-hsync +vsync
	Gamma	1.0
EndSection

Section "Device"
	Identifier	"Configured Video Device"
	Boardname	"ati"
	Busid		"PCI:1:0:0"
	Driver		"ati"
	Screen	0
	Option		"MergedFB"	"off"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Configured Video Device"
	Monitor		"Generic Monitor"
	Defaultdepth	24
	SubSection "Display"
		Depth	24
		Virtual	1920	1200
		Modes		"1920x1200 at 60"	"1680x1050 at 60"	"1600x1024 at 60"	"1440x900 at 60" 
"1280x800 at 60"	"1280x720 at 60"	"1280x768 at 60"	"800x600 at 60"	"800x600 at 56"
	EndSubSection
EndSection


Section "DRI"
	Mode	0666
EndSection


Section "Extensions"
	Option		"Composite"	"Enable"
EndSection
Section "device" #
	Identifier	"device1"
	Boardname	"ati"
	Busid		"PCI:1:0:0"
	Driver		"ati"
	Screen	1
	Option		"MergedFB"	"off"
EndSection
Section "screen" #
	Identifier	"screen1"
	Device		"device1"
	Defaultdepth	24
	Monitor		"monitor1"
EndSection
Section "monitor" #
	Identifier	"monitor1"
	Gamma	1.0
EndSection
Section "ServerFlags"
EndSection

= = = = =