Not all partitions are detected
Nicolae Ghimbovschi
xfreebird at gmail.com
Tue Apr 22 18:35:48 UTC 2008
dmesg listing
[ 0.000000] Linux version 2.6.24-16-generic (buildd at palmer) (gcc
version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC
2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fb820
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FA4A0 checksum 0
[ 0.000000] ACPI: RSDP 000FA4A0, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7 10
MSFT 97)
[ 0.000000] ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7 11
MSFT 97)
[ 0.000000] ACPI: DSDT 1FFF0120, 30F2 (r1 VIA VIA_K7 1000
MSFT 100000D)
[ 0.000000] ACPI: FACS 1FFF8000, 0040
[ 0.000000] ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7 9
MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:8 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dec00000)
[ 0.000000] swsusp: Registered nosave memory region:
000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region:
00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region:
00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 130033
[ 0.000000] Kernel command line:
root=UUID=d699b2c1-9a2a-4b59-a0ea-c52f806c1154 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1666.505 MHz processor.
[ 17.709746] Console: colour VGA+ 80x25
[ 17.709751] console [tty0] enabled
[ 17.710285] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.710668] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.730306] Memory: 507812k/524224k available (2157k kernel code,
15888k reserved, 998k data, 364k init, 0k highmem)
[ 17.730317] virtual kernel memory layout:
[ 17.730319] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 17.730320] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 17.730322] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 17.730323] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 17.730325] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 17.730326] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 17.730328] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 17.730332] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 17.730387] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[ 17.810357] Calibrating delay using timer specific routine..
3336.87 BogoMIPS (lpj=6673756)
[ 17.810401] Security Framework initialized
[ 17.810410] SELinux: Disabled at boot.
[ 17.810436] AppArmor: AppArmor initialized
[ 17.810442] Failure registering capabilities with primary security module.
[ 17.810455] Mount-cache hash table entries: 512
[ 17.810634] CPU: After generic identify, caps: 0383fbff c1c3fbff
00000000 00000000 00000000 00000000 00000000 00000000
[ 17.810646] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
[ 17.810651] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 17.810654] CPU: L2 Cache: 256K (64 bytes/line)
[ 17.810658] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000
00000420 00000000 00000000 00000000 00000000
[ 17.810672] Compat vDSO mapped to ffffe000.
[ 17.810687] Checking 'hlt' instruction... OK.
[ 17.826639] SMP alternatives: switching to UP code
[ 17.828050] Freeing SMP alternatives: 11k freed
[ 17.828237] Early unpacking initramfs... done
[ 18.231995] ACPI: Core revision 20070126
[ 18.232128] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[ 18.234125] CPU0: AMD Athlon(tm) XP 2000+ stepping 01
[ 18.234159] Total of 1 processors activated (3336.87 BogoMIPS).
[ 18.234914] ENABLING IO-APIC IRQs
[ 18.235252] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 18.382013] Brought up 1 CPUs
[ 18.382087] CPU0 attaching sched-domain:
[ 18.382090] domain 0: span 01
[ 18.382093] groups: 01
[ 18.382386] net_namespace: 64 bytes
[ 18.382396] Booting paravirtualized kernel on bare hardware
[ 18.383019] Time: 20:29:35 Date: 04/22/08
[ 18.383068] NET: Registered protocol family 16
[ 18.383356] EISA bus registered
[ 18.383394] ACPI: bus type pci registered
[ 18.386527] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
[ 18.386530] PCI: Using configuration type 1
[ 18.386533] Setting up standard PCI resources
[ 18.391057] ACPI: EC: Look up EC in DSDT
[ 18.395248] ACPI: Interpreter enabled
[ 18.395252] ACPI: (supports S0 S1 S4 S5)
[ 18.395268] ACPI: Using IOAPIC for interrupt routing
[ 18.399764] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 18.400198] PCI quirk: region 0800-087f claimed by vt8235 PM
[ 18.400203] PCI quirk: region 0400-040f claimed by vt8235 SMB
[ 18.400502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 18.402543] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 18.402646] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 18.402745] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 18.402843] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 18.402965] ACPI: Power Resource [URP1] (off)
[ 18.402999] ACPI: Power Resource [URP2] (off)
[ 18.403030] ACPI: Power Resource [FDDP] (off)
[ 18.403061] ACPI: Power Resource [LPTP] (off)
[ 18.403128] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 18.403175] pnp: PnP ACPI init
[ 18.403185] ACPI: bus type pnp registered
[ 18.406250] pnp: PnP ACPI: found 11 devices
[ 18.406254] ACPI: ACPI bus type pnp unregistered
[ 18.406260] PnPBIOS: Disabled by ACPI PNP
[ 18.406682] PCI: Using ACPI for IRQ routing
[ 18.406688] PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
[ 18.417932] NET: Registered protocol family 8
[ 18.417935] NET: Registered protocol family 20
[ 18.418046] AppArmor: AppArmor Filesystem Enabled
[ 18.421909] Time: tsc clocksource has been installed.
[ 18.429962] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[ 18.429966] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 18.429969] system 00:01: ioport range 0x400-0x40f has been reserved
[ 18.429972] system 00:01: ioport range 0x820-0x821 has been reserved
[ 18.429977] system 00:01: iomem range 0xfee00000-0xfee00fff could
not be reserved
[ 18.460530] PCI: Bridge: 0000:00:01.0
[ 18.460532] IO window: disabled.
[ 18.460538] MEM window: dde00000-dfefffff
[ 18.460542] PREFETCH window: cdd00000-ddcfffff
[ 18.460561] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 18.460578] NET: Registered protocol family 2
[ 18.497989] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 18.498299] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 18.498576] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 18.498866] TCP: Hash tables configured (established 16384 bind 16384)
[ 18.498870] TCP reno registered
[ 18.510070] checking if image is initramfs... it is
[ 18.961522] Switched to high resolution mode on CPU 0
[ 19.263200] Freeing initrd memory: 7282k freed
[ 19.264205] audit: initializing netlink socket (disabled)
[ 19.264227] audit(1208896176.428:1): initialized
[ 19.266939] VFS: Disk quotas dquot_6.5.1
[ 19.267051] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 19.267251] io scheduler noop registered
[ 19.267255] io scheduler anticipatory registered
[ 19.267257] io scheduler deadline registered
[ 19.267270] io scheduler cfq registered (default)
[ 19.267289] PCI: VIA PCI bridge detected. Disabling DAC.
[ 19.267353] Boot video device is 0000:01:00.0
[ 19.267735] isapnp: Scanning for PnP cards...
[ 19.621265] isapnp: No Plug & Play device found
[ 19.660176] Real Time Clock Driver v1.12ac
[ 19.660323] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
[ 19.660500] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.661428] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.662486] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 19.662586] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 19.662725] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 19.663138] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.663145] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 19.665317] mice: PS/2 mouse device common for all mice
[ 19.665485] EISA: Probing bus 0 at eisa.0
[ 19.665523] EISA: Detected 0 cards.
[ 19.665528] cpuidle: using governor ladder
[ 19.665531] cpuidle: using governor menu
[ 19.665741] NET: Registered protocol family 1
[ 19.665784] Using IPI No-Shortcut mode
[ 19.665840] registered taskstats version 1
[ 19.665958] Magic number: 4:688:498
[ 19.666254] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 19.666257] EDD information not available.
[ 19.666870] Freeing unused kernel memory: 364k freed
[ 19.700910] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 20.956958] fuse init (API version 7.9)
[ 20.990062] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 21.731611] usbcore: registered new interface driver usbfs
[ 21.731646] usbcore: registered new interface driver hub
[ 21.743416] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level,
low) -> IRQ 16
[ 21.796285] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]
MMIO=[dffff800-dfffffff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 21.824660] usbcore: registered new device driver usb
[ 21.865378] SCSI subsystem initialized
[ 21.872131] USB Universal Host Controller Interface driver v3.0
[ 21.951144] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 21.956440] libata version 3.00 loaded.
[ 21.972472] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level,
low) -> IRQ 17
[ 21.972495] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 21.972936] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 1
[ 21.972978] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000e000
[ 21.973209] usb usb1: configuration #1 chosen from 1 choice
[ 21.973248] hub 1-0:1.0: USB hub found
[ 21.973258] hub 1-0:1.0: 2 ports detected
[ 22.063132] Floppy drive(s): fd0 is 1.44M
[ 22.075187] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level,
low) -> IRQ 17
[ 22.075207] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 22.075241] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
bus number 2
[ 22.075270] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e400
[ 22.075433] usb usb2: configuration #1 chosen from 1 choice
[ 22.075464] hub 2-0:1.0: USB hub found
[ 22.075474] hub 2-0:1.0: 2 ports detected
[ 22.085862] FDC 0 is a post-1991 82077
[ 22.179105] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level,
low) -> IRQ 17
[ 22.179126] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 22.179162] uhci_hcd 0000:00:10.2: new USB bus registered, assigned
bus number 3
[ 22.179192] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000e800
[ 22.179369] usb usb3: configuration #1 chosen from 1 choice
[ 22.179406] hub 3-0:1.0: USB hub found
[ 22.179416] hub 3-0:1.0: 2 ports detected
[ 22.283992] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level,
low) -> IRQ 17
[ 22.284016] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 22.284065] ehci_hcd 0000:00:10.3: new USB bus registered, assigned
bus number 4
[ 22.284121] ehci_hcd 0000:00:10.3: irq 17, io mem 0xdffff700
[ 22.294832] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[ 22.295032] usb usb4: configuration #1 chosen from 1 choice
[ 22.295068] hub 4-0:1.0: USB hub found
[ 22.295080] hub 4-0:1.0: 6 ports detected
[ 22.399093] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level,
low) -> IRQ 18
[ 22.404867] eth0: VIA Rhine II at 0xdffff600, 00:30:1b:2b:a1:c1, IRQ 18.
[ 22.405578] eth0: MII PHY found at address 1, status 0x786d
advertising 01e1 Link 45e1.
[ 22.405994] ACPI: Unable to derive IRQ for device 0000:00:11.1
[ 22.406092] ACPI: Unable to derive IRQ for device 0000:00:11.1
[ 22.411509] pata_via 0000:00:11.1: version 0.3.3
[ 22.411542] ACPI: Unable to derive IRQ for device 0000:00:11.1
[ 22.413494] scsi0 : pata_via
[ 22.414887] scsi1 : pata_via
[ 22.417789] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 22.417794] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 22.579186] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 22.579193] ata1.00: 160086528 sectors, multi 16: LBA48
[ 22.595039] ata1.00: configured for UDMA/133
[ 23.230512] ata2.00: ATAPI: ASUS CRW-5232AS, 1.03, max UDMA/33
[ 23.230537] ata2.01: ATAPI: CDU5211, YYS7, max UDMA/33
[ 23.242868] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110600000039c1]
[ 23.394246] ata2.00: configured for UDMA/33
[ 23.558111] ata2.01: configured for UDMA/33
[ 23.558319] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0
YAR4 PQ: 0 ANSI: 5
[ 23.559342] scsi 1:0:0:0: CD-ROM ASUS CRW-5232AS
1.03 PQ: 0 ANSI: 5
[ 23.559854] scsi 1:0:1:0: CD-ROM SONY CD-ROM CDU5211
YYS7 PQ: 0 ANSI: 5
[ 23.577938] Driver 'sd' needs updating - please use bus_type methods
[ 23.578081] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
[ 23.578102] sd 0:0:0:0: [sda] Write Protect is off
[ 23.578105] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.578132] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 23.578207] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
[ 23.578220] sd 0:0:0:0: [sda] Write Protect is off
[ 23.578223] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.578244] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 23.578249] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 23.590495] sda1 sda2 sda3 sda4 <<3>ata1.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2
[ 23.656917] ata1.00: BMDMA stat 0x24
[ 23.656929] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 23.656931] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 23.656935] ata1.00: status: { DRDY ERR }
[ 23.656938] ata1.00: error: { ICRC ABRT }
[ 23.656967] ata1: soft resetting link
[ 23.833911] ata1.00: configured for UDMA/133
[ 23.833934] ata1: EH complete
[ 23.898142] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 23.898150] ata1.00: BMDMA stat 0x24
[ 23.898158] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 23.898160] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 23.898164] ata1.00: status: { DRDY ERR }
[ 23.898167] ata1.00: error: { ICRC ABRT }
[ 23.898196] ata1: soft resetting link
[ 24.077714] ata1.00: configured for UDMA/133
[ 24.077742] ata1: EH complete
[ 24.139391] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.139399] ata1.00: BMDMA stat 0x24
[ 24.139408] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 24.139410] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 24.139414] ata1.00: status: { DRDY ERR }
[ 24.139417] ata1.00: error: { ICRC ABRT }
[ 24.139446] ata1: soft resetting link
[ 24.317538] ata1.00: configured for UDMA/133
[ 24.317568] ata1: EH complete
[ 24.380617] ata1.00: limiting speed to UDMA/100:PIO4
[ 24.380622] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.380627] ata1.00: BMDMA stat 0x24
[ 24.380635] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 24.380637] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 24.380641] ata1.00: status: { DRDY ERR }
[ 24.380643] ata1.00: error: { ICRC ABRT }
[ 24.380672] ata1: soft resetting link
[ 24.557328] ata1.00: configured for UDMA/100
[ 24.557358] ata1: EH complete
[ 24.621880] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.621887] ata1.00: BMDMA stat 0x24
[ 24.621896] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 24.621898] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 24.621902] ata1.00: status: { DRDY ERR }
[ 24.621904] ata1.00: error: { ICRC ABRT }
[ 24.621933] ata1: soft resetting link
[ 24.801821] ata1.00: configured for UDMA/100
[ 24.801850] ata1: EH complete
[ 24.863130] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.863139] ata1.00: BMDMA stat 0x24
[ 24.863147] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 24.863149] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 24.863153] ata1.00: status: { DRDY ERR }
[ 24.863155] ata1.00: error: { ICRC ABRT }
[ 24.863185] ata1: soft resetting link
[ 25.041724] ata1.00: configured for UDMA/100
[ 25.041753] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 25.041758] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current]
[descriptor]
[ 25.041765] Descriptor sense data with sense descriptors (in hex):
[ 25.041767] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 25.041775] 05 01 4e a8
[ 25.041778] sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
[ 25.041789] end_request: I/O error, dev sda, sector 83971752
[ 25.041795] Buffer I/O error on device sda, logical block 10496469
[ 25.041825] ata1: EH complete
[ 25.104350] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 25.104353] ata1.00: BMDMA stat 0x24
[ 25.104362] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 25.104363] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 25.104367] ata1.00: status: { DRDY ERR }
[ 25.104370] ata1.00: error: { ICRC ABRT }
[ 25.104390] ata1: soft resetting link
[ 25.281453] ata1.00: configured for UDMA/100
[ 25.281482] ata1: EH complete
[ 25.345617] ata1.00: limiting speed to UDMA/33:PIO4
[ 25.345627] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 25.345632] ata1.00: BMDMA stat 0x24
[ 25.345640] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 25.345642] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 25.345645] ata1.00: status: { DRDY ERR }
[ 25.345648] ata1.00: error: { ICRC ABRT }
[ 25.345677] ata1: soft resetting link
[ 25.524577] ata1.00: configured for UDMA/33
[ 25.524608] ata1: EH complete
[ 25.540079] >
[ 25.540191] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
[ 25.549300] sd 0:0:0:0: [sda] Attached SCSI disk
[ 25.556811] sd 0:0:0:0: [sda] Write Protect is off
[ 25.556820] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 25.556905] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 25.556938] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
[ 25.556952] sd 0:0:0:0: [sda] Write Protect is off
[ 25.556955] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 25.556976] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 25.557387] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 25.557414] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 25.557438] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 25.559696] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 25.559707] Uniform CD-ROM driver Revision: 3.20
[ 25.559807] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 25.564304] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 25.564400] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 25.965938] Attempting manual resume
[ 25.965945] swsusp: Resume From Partition 8:3
[ 25.965947] PM: Checking swsusp image.
[ 25.966293] PM: Resume from disk failed.
[ 26.000624] kjournald starting. Commit interval 5 seconds
[ 26.000650] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.596358] Linux agpgart interface v0.102
[ 34.653063] agpgart: Detected VIA KM400/KM400A chipset
[ 34.658482] agpgart: AGP aperture is 64M @ 0xe0000000
[ 34.712521] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.780958] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 35.256404] irda_init()
[ 35.256440] NET: Registered protocol family 23
[ 35.296609] input: Power Button (FF) as /devices/virtual/input/input2
[ 35.308339] ACPI: Power Button (FF) [PWRF]
[ 35.308559] input: Power Button (CM) as /devices/virtual/input/input3
[ 35.320310] ACPI: Power Button (CM) [PWRB]
[ 35.320500] input: Sleep Button (CM) as /devices/virtual/input/input4
[ 35.336316] ACPI: Sleep Button (CM) [SLPB]
[ 36.184806] nvidia: module license 'NVIDIA' taints kernel.
[ 38.062361] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 38.424336] input: GenPS/2 Genius Mouse as
/devices/platform/i8042/serio1/input/input6
[ 38.699915] parport_pc 00:0a: reported by Plug and Play ACPI
[ 38.700005] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 38.782738] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level,
low) -> IRQ 19
[ 38.783340] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.05
Tue Jan 22 19:36:58 PST 2008
[ 38.882588] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level,
low) -> IRQ 20
[ 38.882740] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 41.599434] loop: module loaded
[ 41.630114] lp0: using parport0 (interrupt-driven).
[ 41.755205] Adding 1020116k swap on /dev/sda3. Priority:-1
extents:1 across:1020116k
[ 42.322551] EXT3 FS on sda2, internal journal
[ 43.683124] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 44.330295] No dock devices found.
[ 45.737420] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 45.737429] apm: overridden by ACPI.
[ 45.862309] ppdev: user-space parallel port driver
[ 45.985671] audit(1208885403.487:2): type=1503
operation="inode_permission" requested_mask="a::" denied_mask="a::"
name="/dev/tty" pid=4833 profile="/usr/sbin/cupsd" namespace="default"
[ 47.112784] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 47.206319] Bluetooth: Core ver 2.11
[ 47.209718] NET: Registered protocol family 31
[ 47.209726] Bluetooth: HCI device and connection manager initialized
[ 47.209734] Bluetooth: HCI socket layer initialized
[ 47.278727] Bluetooth: L2CAP ver 2.9
[ 47.278736] Bluetooth: L2CAP socket layer initialized
[ 47.386624] Bluetooth: RFCOMM socket layer initialized
[ 47.386654] Bluetooth: RFCOMM TTY layer initialized
[ 47.386657] Bluetooth: RFCOMM ver 1.8
[ 48.603685] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 48.604633] agpgart: BIOS bug. AGP bridge claims to only support x4
rateFixing up support for x2 & x1
[ 48.604642] agpgart: Device is in legacy mode, falling back to 2.x
[ 48.606219] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 48.606948] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 50.371204] NET: Registered protocol family 17
[ 54.202013] NET: Registered protocol family 10
[ 54.202976] lo: Disabled Privacy Extensions
[ 64.583882] eth0: no IPv6 routers present
[ 84.280903] compiz.real[5534]: segfault at 0895547c eip b7b20df3
esp bf84a9a0 error 4
[ 643.390217] synaptic[5956]: segfault at 41206d85 eip 080b9646 esp
bfe52e80 error 4
[ 1104.154193] ieee1394: Node added: ID:BUS[0-00:1023] GUID[080046010263a55a]
[ 1104.155292] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 1104.433373] ieee1394: raw1394: /dev/raw1394 device initialized
[ 1104.449673] NOTE: The dv1394 driver is unsupported and may be
removed in a future Linux release. Use raw1394 instead.
[ 1125.177297] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
[ 1125.177313] ieee1394: Node suspended: ID:BUS[0-00:1023]
GUID[080046010263a55a]
[ 1169.396114] ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[080046010263a55a]
[ 1169.396560] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 1190.160929] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
[ 1190.160945] ieee1394: Node suspended: ID:BUS[0-00:1023]
GUID[080046010263a55a]
[ 1257.782552] video1394: Installed video1394 module
[ 1282.384157] ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[080046010263a55a]
[ 1282.384638] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 1382.134264] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
[ 1382.134279] ieee1394: Node suspended: ID:BUS[0-00:1023]
GUID[080046010263a55a]
[ 1426.002302] ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[080046010263a55a]
[ 1426.002449] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 1523.140695] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
[ 1523.140711] ieee1394: Node suspended: ID:BUS[0-00:1023]
GUID[080046010263a55a]
[ 1606.720064] ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[080046010263a55a]
[ 1606.720199] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 2000.760517] Bad page state in process 'kswapd0'
[ 2000.760521] page:c11012c0 flags:0x40000008 mapping:d98f2ac4
mapcount:0 count:0
[ 2000.760523] Trying to fix it up, but a reboot is needed
[ 2000.760524] Backtrace:
[ 2000.760537] Pid: 149, comm: kswapd0 Tainted: P 2.6.24-16-generic #1
[ 2000.760575] [<c016d7d3>] bad_page+0x63/0xa0
[ 2000.760601] [<c016deb7>] free_hot_cold_page+0x187/0x1a0
[ 2000.760612] [<c016def6>] __pagevec_free+0x26/0x30
[ 2000.760621] [<c0171307>] release_pages+0x137/0x160
[ 2000.760634] [<c01725df>] isolate_lru_pages+0x5f/0x1c0
[ 2000.760647] [<c0171905>] __pagevec_release+0x15/0x20
[ 2000.760652] [<c0173720>] shrink_inactive_list+0x2a0/0x350
[ 2000.760685] [<c017386c>] shrink_zone+0x9c/0x100
[ 2000.760694] [<c0173f0c>] kswapd+0x44c/0x490
[ 2000.760716] [<c0140b70>] autoremove_wake_function+0x0/0x40
[ 2000.760727] [<c0123a20>] complete+0x40/0x60
[ 2000.760736] [<c0173ac0>] kswapd+0x0/0x490
[ 2000.760741] [<c01408b2>] kthread+0x42/0x70
[ 2000.760744] [<c0140870>] kthread+0x0/0x70
[ 2000.760749] [<c0105677>] kernel_thread_helper+0x7/0x10
[ 2000.760760] =======================
[ 2211.726757] gnome-appearanc[7515]: segfault at 00000002 eip
b7229657 esp bff2fe1c error 4
[ 2597.554889] Bad page state in process 'ksoftirqd/0'
[ 2597.554893] page:c11012c0 flags:0x40000000 mapping:00000000
mapcount:1 count:0
[ 2597.554895] Trying to fix it up, but a reboot is needed
[ 2597.554897] Backtrace:
[ 2597.554908] Pid: 4, comm: ksoftirqd/0 Tainted: P B 2.6.24-16-generic #1
[ 2597.554945] [<c016d7d3>] bad_page+0x63/0xa0
[ 2597.554968] [<c016deb7>] free_hot_cold_page+0x187/0x1a0
[ 2597.554975] [<c0171812>] put_page+0xc2/0xf0
[ 2597.554983] [<c019e364>] __d_free+0x14/0x30
[ 2597.554991] [<c013e489>] __rcu_process_callbacks+0x69/0x1d0
[ 2597.555004] [<c013e608>] rcu_process_callbacks+0x18/0x30
[ 2597.555009] [<c0131f7d>] tasklet_action+0x4d/0xc0
[ 2597.555019] [<c0131a22>] __do_softirq+0x82/0x110
[ 2597.555029] [<c0131b05>] do_softirq+0x55/0x60
[ 2597.555033] [<c0131e89>] ksoftirqd+0x89/0x100
[ 2597.555039] [<c0131e00>] ksoftirqd+0x0/0x100
[ 2597.555043] [<c01408b2>] kthread+0x42/0x70
[ 2597.555048] [<c0140870>] kthread+0x0/0x70
[ 2597.555052] [<c0105677>] kernel_thread_helper+0x7/0x10
[ 2597.555064] =======================
On Tue, Apr 22, 2008 at 9:34 PM, Nicolae Ghimbovschi
<xfreebird at gmail.com> wrote:
> Hello ,
>
> I have installed ubuntu 8.04 RC
> Linux ubuntu-titan 2.6.24-16-generic #1 SMP Thu Apr 10 13:23:42 UTC
> 2008 i686 GNU/Linux
>
> The problem is in that it doesn't detect all partitions.
>
>
> root at ubuntu-titan:~# cat /proc/partitions
> major minor #blocks name
>
> 8 0 80043264 sda
> 8 1 20482843 sda1
> 8 2 20482875 sda2
> 8 3 1020127 sda3
> 8 4 1 sda4
>
> But when I use fdisk , it shows all the existing partitions:
>
> root at ubuntu-titan:~# fdisk /dev/sda
>
> The number of cylinders for this disk is set to 9964.
> There is nothing wrong with that, but this is larger than 1024,
> and could in certain setups cause problems with:
> 1) software that runs at boot time (e.g., old versions of LILO)
> 2) booting and partitioning software from other OSs
> (e.g., DOS FDISK, OS/2 FDISK)
>
> Command (m for help): p
>
> Disk /dev/sda: 81.9 GB, 81964302336 bytes
> 255 heads, 63 sectors/track, 9964 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> Disk identifier: 0x0fed0fed
>
> Device Boot Start End Blocks Id System
> /dev/sda1 * 1 2550 20482843+ 7 HPFS/NTFS
> /dev/sda2 2551 5100 20482875 83 Linux
> /dev/sda3 5101 5227 1020127+ 82 Linux swap / Solaris
> /dev/sda4 5228 9964 38049952+ 5 Extended
> /dev/sda5 5228 9964 38049921 7 HPFS/NTFS
>
> Command (m for help): q
>
>
> Below is a part from dmesg listing:
>
> ...
> [ 23.578223] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 23.578244] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 23.578249] sda:<4>Driver 'sr' needs updating - please use bus_type methods
> [ 23.590495] sda1 sda2 sda3 sda4 <<3>ata1.00: exception Emask 0x0
> SAct 0x0 SErr 0x0 action 0x2
> [ 23.656917] ata1.00: BMDMA stat 0x24
> [ 23.656929] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
> dma 4096 in
> [ 23.656931] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
> 0x10 (ATA bus error)
> ...
>
> bus_type is a kernel boot parameter ?
>
> Additional info:
> root at ubuntu-titan:~# lspci
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
> 00:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
> Controller (rev 43)
> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 80)
> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 80)
> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 80)
> 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
> 00:11.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> 00:11.5 Multimedia audio controller: VIA Technologies, Inc.
> VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
> 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2
> MX/MX 400] (rev b2)
>
> The dmesg listing is in the attached file.
>
> --
> Be the change you want to see in the world !
>
--
Be the change you want to see in the world !
More information about the ubuntu-users
mailing list