[ubuntu-users] Error NT_STATUS_CONNECTION_REFUSED

Tue Apr 8 00:04:23 UTC 2008

Rob:
Here is the entire file.
Ted

Uma wrote:

> Any chance of seeing the smb.conf file for the affected machine?
>
> ~Rob
>   

ted at Ubuntu:~$ cat /etc/samba/smb.conf
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors.
#
#======================= Global Settings 
=====================================
[global]
#-----networkstation user login = Yes
netbios name = Ubuntu

#allow hosts
# domain logons = yes -- done further down.

valid users = ted, user, admin, administration, peggy, pal, star, molly, 
spot, readonly, readwrite, pcguest, guest

hosts allow = 192.168.1. 127. 192.168.1. 192.168.1.6 192.168.1.2 
192.168.1.3 192.168.1.1 192.168.1.12 192.168.1.11 192.168.1.10 
192.168.1.13 192.168.1.5 192.168.1.4 192.168.1.7 192.168.1.8 192.168.1.9 
192.168.1.15 192.168.1.16 192.168.1.17 192.168.1.30 192.168.1.60 
192.168.1.70 127.

null passwords = Yes
security = user
# security = share
# security = user
#-----local master = yes
share modes = yes
encrypt passwords = false

# workgroup = NT-Domain-Name or Workgroup-Name
# workgroup = MYGROUP
workgroup = PEGGYTED

# server string is the equivalent of the NT Description field
server string = SServer

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.

;hosts allow = 192.168.1. 127.

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd

# Uncomment this if you want a guest account, you must add this to 
/etc/passwd
# otherwise the user "nobody" is used
guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
max log size = 1000

# Security mode. Most people will want user level security. See
# security_level.txt for details.
# DEFINED ABOVE
# security = user
# security = share
# Use password server option only with security = server
; password server = <NT-Server-Name>

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
password level = 8
username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
; encrypt passwords = yes
; smb passwd file = /etc/smbpasswd

# Unix users can map to different SMB User names
; username map = /etc/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255

remote browse sync = 192.168.1.255 192.168.1.8 192.168.1.9 192.168.1.15 
192.168.1.2 192.168.1.6 192.168.1.3 192.168.1.4 192.168.1.1 192.168.1.5 
192.168.1.10 192.168.1.11 192.168.1.12 192.168.1.13 192.168.1.16 
192.168.1.17 192.168.1.30 192.168.1.60 192.168.1.70

# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44

remote announce = 192.168.1.255

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
; os level = 23
; Changed from 23 to 60 so that if spcl NOT running compaq4 gets to be 
master
os level = 150

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
# domain master = yes
#----- domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
preferred master = yes

# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
; domain controller = <NT-Domain-Controller-SMBName>

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
#----- domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
#----- logon path = \\%L\Profiles\%U

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, 
/etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that 
are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS 
Server
#----- wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no

#============================ Share Definitions 
==============================
[homes]
comment = Home Directories
browseable = no
read only = no
create mode = 0750

# Un-comment the following and create the netlogon directory for Domain 
Logons
; [netlogon]
; comment = Network Logon Service
; path = /home/netlogon
; guest ok = yes
; writable = no
; share modes = no

[netlogon]
comment = Network Logon Service
path = /home/netlogon
guest ok = yes
writable = no

# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /home/profiles
; browseable = no
; guest ok = yes

[Profiles]
path = /home/profiles
browseable = no
guest ok = yes

# Simulate Windows share level access controls.
# Create two accounts, one for readonly and one for readwrite
# Set the owner of /some/path to readwrite. Use linuxconf to do this by 
premaking
# /some by root with mkdir and leaving /some/path to be made by 
linuxconf by defining
# user path as /some/path.

[service]
path = /some/path
username = readonly readwrite
only user = true

# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
#----- path = /print/lpd
browseable = no

# Set public = yes to allow user 'guest account' to print
; guest ok = no
writable = no
printable = yes
share modes = yes
public = yes

# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes

[tmp]
comment = Temporary file space
path = /tmp
read only = yes
public = yes
browseable = yes
guest ok = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff

[public]
comment = Public Stuff
path = /home/samba
public = yes
writeable = yes
; printable = yes
browseable = yes
guest ok = yes

# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in 
fred's
# home directory. Note that fred must have write access to the spool 
directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no

[ubunted]
comment = Data Mounts
path = /ted
valid users = ted, peggy, pal, molly, star, spot
writable = yes
; printable = yes
browseable = yes
guest ok = yes

[ubun1]
comment = ch1 Data Mounts for bu
path = /sda3/temp1
valid users = ted, peggy, pal, molly, star, spot
writable = yes
; printable = yes
browseable = yes
guest ok = yes

[ubun2]
comment = ch2 Data Mounts for bu
path = /sda3/temp2
valid users = ted, peggy, pal, molly, star, spot
writable = yes
; printable = yes
browseable = yes
guest ok = yes

[ubunshr]
comment = Data Mounts
path = /share
valid users = ted, peggy, pal, molly, star, spot
writable = yes
; printable = yes
browseable = yes
guest ok = yes

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes

# A publicly accessible directory, read/write to all users. Note that 
all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of 
course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no

[publica]
path = /Mted-market
public = yes
writable = yes
; printable = yes
browseable = yes
guest ok = yes

[pubsde1]
path = /media/sde1/
public = yes
writable = yes
; printable = yes
browseable = yes
guest ok = yes

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. 
In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765

#-----[remote]
#----- path = /print/lpd
#----- read only = no
#----- guest ok = Yes
#----- print ok = Yes
#----- share modes = Yes
#----- oplocks = No
#----- printer = remote

#-----[lp]
#----- path = /print/lpd
#----- read only = No
#----- guest ok = Yes
#----- print ok = Yes
#----- share modes = Yes
#----- oplocks = No
#----- printer = lp

#-----[lp0]
#----- path = /print/lpd
#----- read only = No
#----- guest ok = Yes
#----- print ok = Yes
#----- share modes = Yes
#----- oplocks = No
#----- printer = lp0

ted at Ubuntu:~$