AHA-29160 in SPARC-Server

[Jonathan Hirschman]

Mischa Simon wrote:
> "lsmod | grep aic" returns nothing.
> i downloaded the source od the driver from adaptec. How can i "install"
> them?
>   

You should have what you need right now, nothing to install.

try:

modprobe 79xx

or

modprobe 7xxx

One or the other should work. Otherwise you need to compile a new kernel 
module, and that's a real hassle :) See if the built-in stuff works first.

jh
> The boy has an OpenBoot bios. I found that openBoot is like
> openFirmware...
>
> ---
> Mischa
>
> Am Donnerstag, den 11.10.2007, 15:36 -0400 schrieb Jonathan Hirschman:
>   
>> Mischa Simon wrote:
>>     
>>> Hi everyone,
>>>
>>> I bought a used Sun Enterprise 250 and installed my Adaptec AHA-29160 as
>>> second SCSI card and installed Ubuntu 7.04 for Sparc on drive0
>>> (/dev/sda) attached to the first (internal) SCSI device. 
>>>
>>>
>>>
>>> but there should be two more Seagate hdds present (attached to the
>>> AHA-29160). 
>>>
>>> How can I tell my ubuntu that there is a second scsi card installed and
>>> load the driver and the drives?
>>>
>>>
>>>   
>>>       
>> Is the correct (or any) driver module loaded?
>>
>> Try:
>>
>> lsmod | grep aic
>>
>> Anything loaded? What happens if you try one of the aic drivers 
>> (aic7xxx, aic79xx)?
>>
>> If that works, you just need to put the proper entries in /etc/modules.
>>
>> If that doesn't work, is it possible that the card is not initializing 
>> correctly due to the fact that it is placed in a non-x86 box and the 
>> BIOS isn't used? I'm just guessing with that, i have no experience with 
>> Sparc based stuff.
>>
>> jh
>>
>>
>>     
>
>
>