Help
Chris
ubuntu at eportel.com
Thu Jun 7 03:37:09 UTC 2007
On Wed, 2007-06-06 at 23:04 -0400, rdrreed at cox.net wrote:
> I have tried twice to burn a Ubuntu 6.06.1 CD using InfraRecorder and have received the following error message. I am new to this and would like to know what I am doing wrong. Any help would be appreciated.
>
> CCore::BurnImage
> [1,0,0] LITE-ON COMBO SOHC-4832K OPK3
> File = C:\Documents and Settings\HP_Owner\My Documents\UOFA DOWNLOADS\ubuntu-6.06.1-desktop-i386 2nd.iso.
> Eject = 0, Simulate = 1, BUP = 1, Pad tracks = 1, Fixate = 1, Overburn = 0, Swab = 0, Ignore size = 0, Immed = 0, Audio master = 1, Forcespeed = 0, VariRec (enabled) = 0, VariRec (value) = 0, Clone = 0.
> > scsidev: '1,0,0'
> > scsibus: 1 target: 0 lun: 0
> > SCSI buffer size: 64512
> > Cdrecord-ProDVD-Clone 2.01.01a22 (i686-pc-cygwin) Copyright (C) 1995-2006 Jörg Schilling
> > TOC Type: 1 = CD-ROM
> > Using libscg version 'schily-0.9'.
> > Driveropts: 'burnfree,noforcespeed'
> > atapi: -1
> > Device type : Removable CD-ROM
> > Version : 0
> > Response Format: 2
> > Capabilities :
> > Vendor_info : 'LITE-ON '
> > Identifikation : 'COMBO SOHC-4832K'
> > Revision : 'OPK3'
> > Device seems to be: Generic mmc2 DVD-ROM.
> > Current: none
> > Profile: DVD-ROM
> > Profile: CD-RW
> > Profile: CD-R
> > Profile: CD-ROM
> > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> > Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
> > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> > FIFO size : 4194304 = 4096 KB
> > /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: Input/Output error. test unit ready: scsi sendcmd: no error
> > CDB: 00 00 00 00 00 00
> > status: 0x2 (CHECK CONDITION)
> > Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00
> > Sense Key: 0x2 Not Ready, Segment 0
> > Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
> > Sense flags: Blk 0 (not valid)
> > cmd finished after 0.000s timeout 200s
> > /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: No disk / Wrong disk!
> > Track 01: data 698 MB padsize: 30 KB
> > Total size: 802 MB (79:28.01) = 357601 sectors
> > Lout start: 802 MB (79:30/01) = 357601 sectors
> CCore::ProcessEnded
>
> CCore::BurnImage
> [1,0,0] LITE-ON COMBO SOHC-4832K OPK3
> File = C:\Documents and Settings\HP_Owner\My Documents\UOFA DOWNLOADS\ubuntu-6.06.1-desktop-i386 2nd.iso.
> Eject = 0, Simulate = 1, BUP = 1, Pad tracks = 1, Fixate = 1, Overburn = 0, Swab = 0, Ignore size = 0, Immed = 0, Audio master = 1, Forcespeed = 0, VariRec (enabled) = 0, VariRec (value) = 0, Clone = 0.
> > scsidev: '1,0,0'
> > scsibus: 1 target: 0 lun: 0
> > SCSI buffer size: 64512
> > Cdrecord-ProDVD-Clone 2.01.01a22 (i686-pc-cygwin) Copyright (C) 1995-2006 Jörg Schilling
> > TOC Type: 1 = CD-ROM
> > Using libscg version 'schily-0.9'.
> > Driveropts: 'burnfree,noforcespeed'
> > atapi: -1
> > Device type : Removable CD-ROM
> > Version : 0
> > Response Format: 2
> > Capabilities :
> > Vendor_info : 'LITE-ON '
> > Identifikation : 'COMBO SOHC-4832K'
> > Revision : 'OPK3'
> > Device seems to be: Generic mmc2 DVD-ROM.
> > Current: CD-R
> > Profile: DVD-ROM
> > Profile: CD-RW
> > Profile: CD-R (current)
> > Profile: CD-ROM
> > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> > Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
> > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> > Drive buf size : 1895168 = 1850 KB
> > FIFO size : 4194304 = 4096 KB
> > Track 01: data 698 MB padsize: 30 KB
> > Total size: 802 MB (79:28.01) = 357601 sectors
> > Lout start: 802 MB (79:30/01) = 357601 sectors
> > Current Secsize: 2048
> > ATIP info from disk:
> > Indicated writing power: 5
> > Disk Is not unrestricted
> > Disk Is not erasable
> > Disk sub type: Medium Type B, low Beta category (B-) (4)
> > ATIP start of lead in: -11834 (97:24/16)
> > ATIP start of lead out: 359849 (79:59/74)
> > Disk type: Short strategy type (Phthalocyanine or similar)
> > Manuf. index: 24
> > Manufacturer: SONY Corporation
> > Capacity Blklen/Sparesz. Type
> > 449849 2048 No Media Present or Unknown Capacity
> > Blocks total: 359849 Blocks current: 359849 Blocks remaining: 2248
> > Forcespeed is OFF.
> > Starting to write CD/DVD at speed 48 in dummy SAO mode for single session.
> > Last chance to quit, starting dummy write in 5 seconds
> > Operation starts.
> > Waiting for reader process to fill input buffer ... input buffer ready.
> > BURN-Free is ON.
> > Sending CUE sheet...
> > Writing pregap for track 1 at -150
> > Starting new track at sector: 0
> CCore::ProcessEnded
>
> Error: Unable to load ASPI driver, wnaspi32.dll could not be loaded.
> Opened device 'E' using SPTI.
> CCore2Info::GetTotalDiscCapacity
> Current profile: 0x0009.
> Capacity list length: 8 bytes.
> No media present.
> CDiagnostics::DeviceScan
> > Using libscg version 'schily-0.9'.
> > scsibus0:
> > 0,0,0 0) 'ST340015' 'A ' '3.15' Disk
> > 0,1,0 1) *
> > 0,2,0 2) *
> > 0,3,0 3) *
> > 0,4,0 4) *
> > 0,5,0 5) *
> > 0,6,0 6) *
> > 0,7,0 7) HOST ADAPTOR
> > scsibus1:
> > 1,0,0 100) 'LITE-ON ' 'COMBO SOHC-4832K' 'OPK3' Removable CD-ROM
> > 1,1,0 101) *
> > 1,2,0 102) *
> > 1,3,0 103) *
> > 1,4,0 104) *
> > 1,5,0 105) *
> > 1,6,0 106) *
> > 1,7,0 107) HOST ADAPTOR
> > scsibus2:
> > 2,0,0 200) 'Generic ' 'USB SD Reader ' '1.00' Removable Disk
> > 2,1,0 201) *
> > 2,2,0 202) *
> > 2,3,0 203) *
> > 2,4,0 204) *
> > 2,5,0 205) *
> > 2,6,0 206) *
> > 2,7,0 207) HOST ADAPTOR
> > scsibus3:
> > 3,0,0 300) 'Generic ' 'USB CF Reader ' '1.01' Removable Disk
> > 3,1,0 301) *
> > 3,2,0 302) *
> > 3,3,0 303) *
> > 3,4,0 304) *
> > 3,5,0 305) *
> > 3,6,0 306) *
> > 3,7,0 307) HOST ADAPTOR
> > scsibus4:
> > 4,0,0 400) 'Generic ' 'USB SM Reader ' '1.02' Removable Disk
> > 4,1,0 401) *
> > 4,2,0 402) *
> > 4,3,0 403) *
> > 4,4,0 404) *
> > 4,5,0 405) *
> > 4,6,0 406) *
> > 4,7,0 407) HOST ADAPTOR
> > scsibus5:
> > 5,0,0 500) 'Generic ' 'USB MS Reader ' '1.03' Removable Disk
> > 5,1,0 501) *
> > 5,2,0 502) *
> > 5,3,0 503) *
> > 5,4,0 504) *
> > 5,5,0 505) *
> > 5,6,0 506) *
> > 5,7,0 507) HOST ADAPTOR
> CDiagnostics::ProcessEnded
>
Mr. Reed,
Ok well I'm assuming your burning the CD on Windows?
Is you user account and Administrator or Limited?...You should be an
administrator for most burning software.
It's also very important that you burn the .ISO file directly to the
CD...don't try to decompress it...it's a download and burn. (You may
also want to confirm the checksum of the file that you downloaded with
the what the site that you downloaded it from says the checksum should
be.
Finally, some burning software (and from what I can tell InfraRecorder
is one of em) you can not burn CD images or .iso files. We use Nero OEM
edition on Windows machines. Most Nero versions have an option for CD
or DVD images or .iso files.
If you have a Ubuntu or Kubuntu(you probably don't..that's why your
trying to burn the cd of it..right!?) ...or any other version of
Linux....especially KDE versions...the best program for this kind of
thing....and by far the easiest is K3B. This program is standard for
most KDE desktop Linux platforms like Kubuntu...but if you happen to
have a GNOME desktop like Ubuntu you can search for it in Synaptic.
Chris
More information about the ubuntu-users
mailing list