lm-sensors
R Kimber
rkimber at ntlworld.com
Mon Jan 29 17:59:07 UTC 2007
On Mon, 29 Jan 2007 10:19:40 -0700
Homer wrote:
> I posted this on the Kubuntu list and wasn't able to generate
> interest. -----------------------
>
> Kubuntu 6.06.1 i386
> ASUS M2N32 WS motherboard
>
> I just went through the lm-sensors install and detect procedure as
> usual. The following was found:
> ###########
> # Generated by sensors-detect on Thu Jan 25 16:45:43 2007
> # I2C adapter drivers
> # modprobe unknown adapter NVIDIA I2C Device
> i2c-isa
> # I2C chip drivers
> eeprom
> it87
>
> I added those to /etc/modules, did a modprobe and have even rebooted,
> but the only temp I get with gkrellm is "thermal_zone/THRM" and that
> is always at 40.0C. No fans or voltages either. The MB is pretty
> recent, so maybe that's the problem, but I thought I'd toss it out
> there in case one of you have a suggestion or two.
I have an Asus M2N-E, and lm-sensors doesn't work because the relevant
module (in my case k8temp) isn't part of the kernel that comes with
6.06.1
My MB won't be supported until Feisty is released - i.e. kernel 2.6.19
(or 20). Maybe it's the same for yours.
- Richard.
--
Richard Kimber
http://www.psr.keele.ac.uk/
More information about the ubuntu-users
mailing list