fiesty: 'hang' during boot (firmware loading or after)
Lars Hallberg
lah at micropp.se
Wed Apr 11 12:36:58 UTC 2007
I maid a 'manual' upgrade to fiesty by apt-get dist-upgrade so I don't
know if this is a bug or just my system broken.
The boot 'hang' after some failed firmware actions. Keyboard is active,
and I can switch console (but only consol 1 and 8 have output). Most
strange:
Ctrl-alt-delet *continues* the boot *sucessfully*. And then the system
aper to be stable and fully funktional (!) Networking works - but I'm
using the wired ethernet, not the built in wifi.
Would want to know if this is a bug or broken system, and some tip on
what can be added/removed/reconfigured if it's a broken system.
Some references:
HW:
acer Aspire 5021WLMi laptop
AMD Turion 64 ML-28 (but i383 dist)
... ask for details.
The errors (handtyped) on consol 8 before 'hang' (first line for context):
* Activating swapfile swap... [OK]
/etc/rsS.d/S40ifrename: 19: /sbin/ifrename not found
* Configurating network interfaces...
firmware_helper [4456]: main: error loading
'/lib/firmware/bcm43xx_microcode5.fw'
for device '/class/firmware/0000:06:06.0'
'/lib/firmware/bcm43xx_microcode5.fw'
irmware_helper [4474]: main: error loading
'/lib/firmware/bcm43xx_microcode5.fw'
for device '/class/firmware/0000:06:06.0'
'/lib/firmware/bcm43xx_microcode5.fw'
irmware_helper [4477]: main: error loading
'/lib/firmware/bcm43xx_microcode5.fw'
for device '/class/firmware/0000:06:06.0'
'/lib/firmware/bcm43xx_microcode5.fw'
[hang]... After ctrl-alt-del something like (x clears the screen pretty
fast):
init rsS ... killed by term signal
init rs6 ... killed by term signal
uname -a:
Linux meeran 2.6.20-14-generic #2 SMP Mon Apr 2 20:37:49 UTC 2007 i686
GNU/Linux
dmesg:
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6de0
[ 0.000000] Entering add_active_range(0, 0, 130720) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130720
[ 0.000000] HighMem 130720 -> 130720
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130720
[ 0.000000] On node 0 totalpages: 130720
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 989 pages used for memmap
[ 0.000000] Normal zone: 125635 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 PTLTD )
@ 0x000f6da0
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP
0x00000000) @ 0x1fea81e3
[ 0.000000] ACPI: FADT (v001 ATI Piranha 0x06040000 ATI
0x000f4240) @ 0x1feade41
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP
0x00000001) @ 0x1feadeb5
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP
0x00000000) @ 0x1feadf6a
[ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP
0x00000000) @ 0x1feadfc4
[ 0.000000] ACPI: DSDT (v001 ATI SB400 0x06040000 MSFT
0x0100000e) @ 0x00000000
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dec00000)
[ 0.000000] Detected 1600.154 MHz processor.
[ 19.661129] Built 1 zonelists. Total pages: 129699
[ 19.661134] Kernel command line:
root=UUID=bf782d31-b85d-4fc7-869b-d93af44aac03 ro quiet splash
[ 19.661291] mapped APIC to ffffd000 (fee00000)
[ 19.661294] mapped IOAPIC to ffffc000 (fec00000)
[ 19.661298] Enabling fast FPU save and restore... done.
[ 19.661301] Enabling unmasked SIMD FPU exception support... done.
[ 19.661310] Initializing CPU#0
[ 19.661380] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 19.662742] Console: colour VGA+ 80x25
[ 19.663076] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 19.663314] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 19.673860] Memory: 506032k/522880k available (1992k kernel code,
16276k reserved, 893k data, 328k init, 0k highmem)
[ 19.673872] virtual kernel memory layout:
[ 19.673873] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 19.673875] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 19.673876] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 19.673878] lowmem : 0xc0000000 - 0xdfea0000 ( 510 MB)
[ 19.673879] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 19.673881] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 19.673882] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 19.673885] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 19.753250] Calibrating delay using timer specific routine.. 3203.52
BogoMIPS (lpj=6407042)
[ 19.753291] Security Framework v1.0.0 initialized
[ 19.753297] SELinux: Disabled at boot.
[ 19.753313] Mount-cache hash table entries: 512
[ 19.753440] CPU: After generic identify, caps: 078bfbff e3d3fbff
00000000 00000000 00000001 00000000 00000001
[ 19.753449] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 19.753452] CPU: L2 Cache: 512K (64 bytes/line)
[ 19.753455] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000
00000410 00000001 00000000 00000001
[ 19.753465] Compat vDSO mapped to ffffe000.
[ 19.753468] Remapping vsyscall page to ffffe000
[ 19.753478] Checking 'hlt' instruction... OK.
[ 19.769347] SMP alternatives: switching to UP code
[ 19.769515] Freeing SMP alternatives: 11k freed
[ 19.769722] Early unpacking initramfs... done
[ 20.175154] ACPI: Core revision 20060707
[ 20.178143] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not
found, using machine DSDT.
[ 20.183186] CPU0: AMD Turion(tm) 64 Mobile Technology ML-28 stepping 02
[ 20.183207] Total of 1 processors activated (3203.52 BogoMIPS).
[ 20.183385] ENABLING IO-APIC IRQs
[ 20.183582] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 20.223253] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 20.223305] ...trying to set up timer (IRQ0) through the 8259A ...
failed.
[ 20.223307] ...trying to set up timer as Virtual Wire IRQ... works.
[ 20.368375] Brought up 1 CPUs
[ 20.368594] Booting paravirtualized kernel on bare hardware
[ 20.368682] Time: 14:38:45 Date: 03/11/107
[ 20.368711] NET: Registered protocol family 16
[ 20.368793] EISA bus registered
[ 20.368797] ACPI: bus type pci registered
[ 20.381387] PCI: PCI BIOS revision 2.10 entry at 0xfd63c, last bus=6
[ 20.381390] PCI: Using configuration type 1
[ 20.381392] Setting up standard PCI resources
[ 20.388706] ACPI: Interpreter enabled
[ 20.388709] ACPI: Using IOAPIC for interrupt routing
[ 20.389224] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.389229] PCI: Probing PCI hardware (bus 00)
[ 20.391073] Boot video device is 0000:01:00.0
[ 20.391855] PCI: Transparent bridge - 0000:00:14.4
[ 20.391930] PCI: Bus #07 (-#08) is hidden behind transparent bridge
#06 (-#06) (try 'pci=assign-busses')
[ 20.391933] Please report the result to linux-kernel to fix this
permanently
[ 20.391968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.395987] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 20.396246] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 20.396535] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 20.396789] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 20.397045] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 20.397299] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 20.397554] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 20.397814] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 20.434071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 20.434289] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 20.434591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 20.435009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 20.435639] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.435650] pnp: PnP ACPI init
[ 20.445175] pnp: PnP ACPI: found 11 devices
[ 20.445179] PnPBIOS: Disabled by ACPI PNP
[ 20.445227] PCI: Using ACPI for IRQ routing
[ 20.445230] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 20.445238] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 20.445240] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 20.445243] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[ 20.445246] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
[ 20.467424] NET: Registered protocol family 8
[ 20.467427] NET: Registered protocol family 20
[ 20.467681] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 20.467685] pnp: 00:08: ioport range 0x1200-0x120f has been reserved
[ 20.467688] pnp: 00:08: ioport range 0x500-0x51f has been reserved
[ 20.467691] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[ 20.467931] PCI: Bridge: 0000:00:02.0
[ 20.467934] IO window: 9000-9fff
[ 20.467938] MEM window: c0100000-c01fffff
[ 20.467941] PREFETCH window: c8000000-cfffffff
[ 20.467945] PCI: Bridge: 0000:00:06.0
[ 20.467946] IO window: disabled.
[ 20.467949] MEM window: disabled.
[ 20.467951] PREFETCH window: disabled.
[ 20.467954] PCI: Bridge: 0000:00:07.0
[ 20.467956] IO window: disabled.
[ 20.467959] MEM window: disabled.
[ 20.467961] PREFETCH window: disabled.
[ 20.467972] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[ 20.467975] IO window: 0000a400-0000a4ff
[ 20.467981] IO window: 0000a800-0000a8ff
[ 20.467987] PREFETCH window: 30000000-33ffffff
[ 20.467993] MEM window: 38000000-3bffffff
[ 20.467999] PCI: Bridge: 0000:00:14.4
[ 20.468003] IO window: a000-afff
[ 20.468010] MEM window: c0200000-c02fffff
[ 20.468015] PREFETCH window: 30000000-35ffffff
[ 20.468032] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 20.468040] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 20.468048] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 20.468076] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level,
low) -> IRQ 16
[ 20.468114] NET: Registered protocol family 2
[ 20.504220] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 20.504311] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 20.504456] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 20.504527] TCP: Hash tables configured (established 16384 bind 8192)
[ 20.504529] TCP reno registered
[ 20.516229] checking if image is initramfs... it is
[ 21.321402] Freeing initrd memory: 8089k freed
[ 21.321845] audit: initializing netlink socket (disabled)
[ 21.321859] audit(1176302325.704:1): initialized
[ 21.321988] VFS: Disk quotas dquot_6.5.1
[ 21.322007] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 21.322061] io scheduler noop registered
[ 21.322063] io scheduler anticipatory registered
[ 21.322066] io scheduler deadline registered
[ 21.322078] io scheduler cfq registered (default)
[ 21.754436] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 21.754458] assign_interrupt_mode Found MSI capability
[ 21.754461] Allocate Port Service[0000:00:02.0:pcie00]
[ 21.754530] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 21.754552] assign_interrupt_mode Found MSI capability
[ 21.754554] Allocate Port Service[0000:00:06.0:pcie00]
[ 21.754615] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 21.754637] assign_interrupt_mode Found MSI capability
[ 21.754639] Allocate Port Service[0000:00:07.0:pcie00]
[ 21.754756] isapnp: Scanning for PnP cards...
[ 22.108983] isapnp: No Plug & Play device found
[ 22.134122] Real Time Clock Driver v1.12ac
[ 22.134176] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 22.134446] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.134936] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level,
low) -> IRQ 17
[ 22.134946] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 22.135015] mice: PS/2 mouse device common for all mice
[ 22.135525] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 22.135745] input: Macintosh mouse button emulation as
/class/input/input0
[ 22.135777] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 22.135781] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 22.136039] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 22.136950] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 22.137030] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.137034] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 22.137037] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 22.137039] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 22.137042] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 22.137163] EISA: Probing bus 0 at eisa.0
[ 22.137172] Cannot allocate resource for EISA slot 1
[ 22.137201] Cannot allocate resource for EISA slot 8
[ 22.137203] EISA: Detected 0 cards.
[ 22.167259] TCP cubic registered
[ 22.167268] NET: Registered protocol family 1
[ 22.167292] Using IPI No-Shortcut mode
[ 22.167358] ACPI: (supports S0 S3 S4 S5)
[ 22.167404] Magic number: 3:877:636
[ 22.167476] hash matches device ptycf
[ 22.167886] Freeing unused kernel memory: 328k freed
[ 22.169457] input: AT Translated Set 2 keyboard as /class/input/input1
[ 22.169610] Time: tsc clocksource has been installed.
[ 23.394740] Capability LSM initialized
[ 23.410484] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12)
initialised: dm-devel at redhat.com
[ 23.439892] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.272000] Time: acpi_pm clocksource has been installed.
[ 3.296000] ACPI: Thermal Zone [TZS0] (50 C)
[ 3.344000] ACPI: Thermal Zone [TZS1] (30 C)
[ 3.392000] ACPI: Thermal Zone [TZSV] (35 C)
[ 3.464000] md: linear personality registered for level -1
[ 3.468000] md: multipath personality registered for level -4
[ 3.472000] md: raid0 personality registered for level 0
[ 3.476000] md: raid1 personality registered for level 1
[ 3.480000] raid5: automatically using best checksumming function:
pIII_sse
[ 3.500000] pIII_sse : 4894.000 MB/sec
[ 3.500000] raid5: using function: pIII_sse (4894.000 MB/sec)
[ 3.588000] raid6: int32x1 685 MB/s
[ 3.656000] raid6: int32x2 693 MB/s
[ 3.724000] raid6: int32x4 578 MB/s
[ 3.792000] raid6: int32x8 430 MB/s
[ 3.860000] raid6: mmxx1 1295 MB/s
[ 3.928000] raid6: mmxx2 2381 MB/s
[ 3.996000] raid6: sse1x1 1187 MB/s
[ 4.064000] raid6: sse1x2 1927 MB/s
[ 4.132000] raid6: sse2x1 2042 MB/s
[ 4.200000] raid6: sse2x2 2601 MB/s
[ 4.200000] raid6: using algorithm sse2x2 (2601 MB/s)
[ 4.200000] md: raid6 personality registered for level 6
[ 4.200000] md: raid5 personality registered for level 5
[ 4.200000] md: raid4 personality registered for level 4
[ 4.232000] md: raid10 personality registered for level 10
[ 4.616000] usbcore: registered new interface driver usbfs
[ 4.616000] usbcore: registered new interface driver hub
[ 4.616000] usbcore: registered new device driver usb
[ 4.620000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[ 4.620000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level,
low) -> IRQ 18
[ 4.620000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.620000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned
bus number 1
[ 4.620000] ohci_hcd 0000:00:13.0: irq 18, io mem 0xc0000000
[ 4.680000] usb usb1: configuration #1 chosen from 1 choice
[ 4.680000] hub 1-0:1.0: USB hub found
[ 4.680000] hub 1-0:1.0: 4 ports detected
[ 4.724000] ieee1394: Initialized config rom entry `ip1394'
[ 4.784000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level,
low) -> IRQ 18
[ 4.784000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.784000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned
bus number 2
[ 4.784000] ohci_hcd 0000:00:13.1: irq 18, io mem 0xc0001000
[ 4.844000] usb usb2: configuration #1 chosen from 1 choice
[ 4.844000] hub 2-0:1.0: USB hub found
[ 4.844000] hub 2-0:1.0: 4 ports detected
[ 4.948000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level,
low) -> IRQ 18
[ 4.948000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 4.948000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned
bus number 3
[ 4.948000] ehci_hcd 0000:00:13.2: irq 18, io mem 0xc0002000
[ 4.948000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 4.948000] usb usb3: configuration #1 chosen from 1 choice
[ 4.948000] hub 3-0:1.0: USB hub found
[ 4.948000] hub 3-0:1.0: 8 ports detected
[ 5.052000] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 22 (level,
low) -> IRQ 19
[ 5.100000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 5.100000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level,
low) -> IRQ 20
[ 5.100000] ATIIXP: chipset revision 0
[ 5.100000] ATIIXP: not 100% native mode: will probe irqs later
[ 5.100000] ide0: BM-DMA at 0x8410-0x8417, BIOS settings:
hda:DMA, hdb:pio
[ 5.100000] ide1: BM-DMA at 0x8418-0x841f, BIOS settings:
hdc:DMA, hdd:pio
[ 5.100000] Probing IDE interface ide0...
[ 5.120000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[c0208000-c02087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 5.388000] hda: IC25N080ATMR04-0, ATA DISK drive
[ 5.964000] usb 1-2: new full speed USB device using ohci_hcd and
address 3
[ 6.060000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 6.080000] Probing IDE interface ide1...
[ 6.172000] usb 1-2: configuration #1 chosen from 1 choice
[ 6.392000] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[1234567812345678]
[ 6.480000] usb 2-2: new low speed USB device using ohci_hcd and
address 2
[ 6.688000] usb 2-2: configuration #1 chosen from 1 choice
[ 6.700000] usbcore: registered new interface driver hiddev
[ 6.704000] input: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM) as /class/input/input2
[ 6.704000] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button
Mouse with IntelliEye(TM)] on usb-0000:00:13.1-2
[ 6.704000] usbcore: registered new interface driver usbhid
[ 6.704000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 6.816000] hdc: PIONEER DVD-RW DVR-K04RA, ATAPI CD/DVD-ROM drive
[ 7.488000] ide1 at 0x170-0x177,0x376 on irq 15
[ 7.496000] SCSI subsystem initialized
[ 7.504000] libata version 2.20 loaded.
[ 7.504000] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 7.504000] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 23 (level,
low) -> IRQ 22
[ 7.504000] eth0: RTL8169sb/8110sb at 0xe08ec400, 00:0a:e4:e0:45:00,
IRQ 22
[ 7.516000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache,
UDMA(33)
[ 7.516000] Uniform CD-ROM driver Revision: 3.20
[ 7.524000] hda: max request size: 512KiB
[ 7.524000] hda: 156301488 sectors (80026 MB) w/7884KiB Cache,
CHS=16383/255/63, UDMA(100)
[ 7.524000] hda: cache flushes supported
[ 7.524000] hda: hda1 hda2 hda3 hda4
[ 7.944000] kjournald starting. Commit interval 5 seconds
[ 7.944000] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.776000] Linux agpgart interface v0.102 (c) Dave Jones
[ 26.796000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 26.800000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.948000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 28.112000] Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080]
[ 28.112000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 28.112000] Yenta: Routing CardBus interrupts to PCI
[ 28.112000] Yenta TI: socket 0000:06:06.0, mfunc 0x010a1b22, devctl 0x64
[ 28.236000] ieee80211_crypt: registered algorithm 'NULL'
[ 28.248000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 28.248000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno at linux.intel.com>
[ 28.324000] sdhci: Secure Digital Host Controller Interface driver
[ 28.324000] sdhci: Copyright(c) Pierre Ossman
[ 28.364000] Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
[ 28.364000] Socket status: 30000006
[ 28.364000] Yenta: Raising subordinate bus# of parent bus (#06) from
#06 to #08
[ 28.364000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 28.364000] cs: IO port probe 0xa000-0xafff: clean.
[ 28.364000] pcmcia: parent PCI bridge Memory window: 0xc0200000 -
0xc02fffff
[ 28.364000] pcmcia: parent PCI bridge Memory window: 0x30000000 -
0x35ffffff
[ 28.364000] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 20 (level,
low) -> IRQ 16
[ 28.364000] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034]
(rev 0)
[ 28.364000] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 20 (level,
low) -> IRQ 16
[ 28.364000] mmc0: SDHCI at 0xc0209000 irq 16 DMA
[ 28.368000] mmc1: SDHCI at 0xc0208c00 irq 16 DMA
[ 28.368000] mmc2: SDHCI at 0xc0208800 irq 16 DMA
[ 28.428000] input: PC Speaker as /class/input/input3
[ 28.732000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1,
caps: 0xa04713/0x204000
[ 28.732000] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level,
low) -> IRQ 17
[ 28.764000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 28.772000] usbcore: registered new interface driver snd-usb-audio
[ 28.868000] bcm43xx driver
[ 28.948000] irda_init()
[ 28.948000] NET: Registered protocol family 23
[ 29.052000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ;
irq 3 ; dma 3.
[ 29.052000] nsc-ircc, chip->init
[ 29.052000] nsc-ircc, Found chip at base=0x02e
[ 29.052000] nsc-ircc, driver loaded (Dag Brattli)
[ 29.052000] nsc_ircc_open(), can't get iobase of 0x2f8
[ 29.052000] nsc-ircc, Found chip at base=0x02e
[ 29.052000] nsc-ircc, driver loaded (Dag Brattli)
[ 29.052000] nsc_ircc_open(), can't get iobase of 0x2f8
[ 29.056000] pnp: Device 00:0a disabled.
[ 29.252000] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level,
low) -> IRQ 21
[ 29.260000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level,
low) -> IRQ 17
[ 29.372000] MC'97 1 converters and GPIO not ready (0xff00)
[ 29.400000] cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
[ 29.400000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07
0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 29.404000] cs: IO port probe 0xa00-0xaff: clean.
[ 29.596000] lp: driver loaded but no devices found
[ 29.784000] Adding 489972k swap on
/dev/disk/by-uuid/e6dc1837-280b-4930-966b-399dcca7b92d. Priority:-1
extents:1 across:489972k
[ 29.936000] EXT3 FS on hda4, internal journal
[ 32.868000] Adding 489972k swap on
/dev/disk/by-uuid/e6dc1837-280b-4930-966b-399dcca7b92d. Priority:-2
extents:1 across:489972k
[ 34.540000] NET: Registered protocol family 17
[ 34.552000] r8169: eth1: link up
[ 39.088000] NET: Registered protocol family 10
[ 39.152000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 39.152000] lo: Disabled Privacy Extensions
[ 39.212000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 39.224000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 49.680000] eth1: no IPv6 routers present
[ 605.976000] ACPI: AC Adapter [ADP1] (on-line)
[ 606.208000] ACPI: Battery Slot [BAT0] (battery present)
[ 606.264000] input: Power Button (FF) as /class/input/input5
[ 606.268000] ACPI: Power Button (FF) [PWRF]
[ 606.308000] input: Lid Switch as /class/input/input6
[ 606.312000] ACPI: Lid Switch [LID0]
[ 606.352000] input: Sleep Button (CM) as /class/input/input7
[ 606.356000] ACPI: Sleep Button (CM) [SLPB]
[ 606.376000] Using specific hotkey driver
[ 606.420000] ACPI: ACPI Dock Station Driver
[ 606.464000] ibm_acpi: ec object not found
[ 606.560000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 606.560000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 606.628000] pcc_acpi: loading...
[ 606.964000] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology
ML-28 processors (version 2.00.00)
[ 606.964000] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x4
[ 606.964000] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16
[ 610.540000] ttyS1: LSR safety check engaged!
[ 615.960000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 617.692000] ppdev: user-space parallel port driver
[ 618.228000] [drm] Initialized drm 1.1.0 20060810
[ 618.288000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level,
low) -> IRQ 23
[ 618.292000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 620.092000] [drm] Setting GART location based on new memory map
[ 620.092000] [drm] Loading R300 Microcode
[ 620.092000] [drm] writeback test succeeded in 1 usecs
[ 620.776000] apm: BIOS not found.
[ 620.788000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 623.880000] Bluetooth: Core ver 2.11
[ 623.880000] NET: Registered protocol family 31
[ 623.880000] Bluetooth: HCI device and connection manager initialized
[ 623.880000] Bluetooth: HCI socket layer initialized
[ 623.956000] Bluetooth: L2CAP ver 2.8
[ 623.956000] Bluetooth: L2CAP socket layer initialized
[ 623.992000] Bluetooth: RFCOMM socket layer initialized
[ 623.992000] Bluetooth: RFCOMM TTY layer initialized
[ 623.992000] Bluetooth: RFCOMM ver 1.8
[ 635.800000] eth1: no IPv6 routers present
[ 644.860000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 668.088000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 691.344000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 714.588000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 738.276000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 862.816000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 986.060000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 1091.736000] APIC error on CPU0: 00(40)
[ 1109.388000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 1232.680000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 1357.612000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 1482.248000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 1605.548000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 1616.384000] APIC error on CPU0: 40(40)
[ 1728.864000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
[ 1852.208000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
More information about the ubuntu-users
mailing list