lm_sensors configuration for Intel D102GGC2 motherboard

Sundar Nagarajan sundar.personal at gmail.com
Wed Oct 11 00:59:24 UTC 2006


Hi Ubuntu-ers,

I recently bought an Intel D102GGC2 motherboard (LGA775 CPU socket 
accepting Pentium D 805 dual-core CPU, on-board ATI video, Realtek 8139 
LAN etc).

I am using it as a server in a 1U case. I have enabled CPU 
under-clocking using p4-clockmod and powernowd and that works beautifully.

I want to monitor the CPU, System temperature, but when I run 
sensors-detect, it cannot find any sensors that it understands!

Does anyone know / have the lm_sensors (sensors.conf) configuration for 
this board?




Here is the output of interaction with sensors-detect:
------------------------------------------------------


# sensors-detect revision 1.393 (2005/08/30 18:51:18)

This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.

It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.

  We can start with probing for (PCI) I2C or SMBus adapters.
  You do not need any special privileges for this.
  Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `to-be-written' for device 00:14.0: ATI Technologies Inc ATI 
SMBus
Probe succesfully concluded.

We will now try to load each adapter module in turn.
Load `to-be-written' (say NO if built into your kernel)? (YES/no):
FATAL: Module to_be_written not found.
Loading failed... skipping.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

  To continue, we need module `i2c-dev' to be loaded.
  If it is built-in into your kernel, you can safely skip this.
i2c-dev is already loaded.

  We are now going to do the adapter probings. Some adapters may hang 
halfway
  through; we can't really help that. Also, some chips will be double 
detected;
  we choose the one with the highest confidence value in that case.
  If you found that the adapter hung after probing a certain address, 
you can
  specify that address to remain unprobed. That often
  includes address 0x69 (clock chip).

Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.

Do you want to scan the ISA bus? (YES/no):
Probing for `National Semiconductor LM78'
   Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
   Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
   Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
   Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
   Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
   Trying address 0x0290... Failed!
Probing for `Winbond W83627EHF'
   Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
   Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
   Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
   Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
   Trying general detect... Failed!
Probing for `ITE IT8712F'
   Trying address 0x0290... Failed!
Probing for `ITE IT8705F / SiS 950'
   Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
   Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
   Trying address 0x0ca8... Failed!

Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.

Do you want to scan for Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
   Failed! (0x7803)
Probing for `ITE 8705F Super IO Sensors'
   Failed! (0x7803)
Probing for `ITE 8712F Super IO Sensors'
   Failed! (0x7803)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
   Failed! (0x78)
Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
   Failed! (0x78)
Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
   Failed! (0x78)
Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
   Failed! (0x78)
Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
   Failed! (0x78)
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
   Failed! (0x78)
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
   Failed! (0x78)
Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
   Failed! (0x78)
Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
   Failed! (0x78)
Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
   Failed! (0x78)
Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
   Failed! (0x78)
Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
   Failed! (0x78)
Probing for `Nat. Semi. PC87591 Super IO'
   Failed! (0x78)
Probing for `Nat. Semi. PC87371 Super IO'
   Failed! (0x78)
Probing for `Nat. Semi. PC97371 Super IO'
   Failed! (0x78)
Probing for `Nat. Semi. PC8739x Super IO'
   Failed! (0x78)
Probing for `Nat. Semi. PC8741x Super IO'
   Failed! (0x78)
Probing for `Nat. Semi. PCPC87427 Super IO'
   Failed! (0x78)
Probing for `SMSC 47B27x Super IO Fan Sensors'
   Failed! (0x78)
Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
   Failed! (0x78)
Probing for `SMSC 47M14x Super IO Fan Sensors'
   Failed! (0x78)
Probing for `SMSC 47M15x/192 Super IO Fan Sensors'
   Failed! (0x78)
Probing for `SMSC 47S42x Super IO Fan Sensors'
   Failed! (0x78)
Probing for `SMSC 47S45x Super IO Fan Sensors'
   Failed! (0x78)
Probing for `SMSC 47M172 Super IO'
   Failed! (0x78)
Probing for `SMSC LPC47B397-NC Super IO'
   Failed! (0x78)
Probing for `VT1211 Super IO Sensors'
   Failed! (skipping family)
Probing for `Winbond W83627EHF/EHG Super IO Sensors'
   Failed! (skipping family)

Do you want to scan for secondary Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
   Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
   Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
   Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
   Failed! (skipping family)
Probing for `Winbond W83627EHF/EHG Super IO Sensors'
   Failed! (skipping family)

  Sorry, no chips were detected.
  Either your sensors are not supported, or they are
  connected to an I2C bus adapter that we do not support.
  See doc/FAQ, doc/lm_sensors-FAQ.html, or
  http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/doc/lm_sensors-FAQ.html
  (FAQ #4.24.3) for further information.
  If you find out what chips are on your board, see
  http://secure.netroedge.com/~lm78/newdrivers.html for driver status.


Below is the output of lspci:
----------------------------

0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5a33 (rev 01)
         Subsystem: Intel Corporation: Unknown device d601
         Flags: bus master, 66MHz, medium devsel, latency 64

0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f 
(prog-if 00 [Normal decode])
         Flags: bus master, 66MHz, medium devsel, latency 64
         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
         I/O behind bridge: 00002000-00002fff
         Memory behind bridge: 60100000-601fffff
         Prefetchable memory behind bridge: 40000000-5fffffff
         Capabilities: [b0] #0d [0000]

0000:00:11.0 IDE interface: ATI Technologies Inc ATI 437A Serial ATA 
Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
         Subsystem: Intel Corporation: Unknown device d601
         Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 23
         I/O ports at 3068 [size=8]
         I/O ports at 3084 [size=4]
         I/O ports at 3060 [size=8]
         I/O ports at 3080 [size=4]
         I/O ports at 3030 [size=16]
         Memory at 60203600 (32-bit, non-prefetchable) [size=512]
         Capabilities: [60] Power Management version 2
         Capabilities: [50] Message Signalled Interrupts: 64bit- 
Queue=0/0 Enable-

0000:00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA 
Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
         Subsystem: Intel Corporation: Unknown device d601
         Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
         I/O ports at 3058 [size=8]
         I/O ports at 307c [size=4]
         I/O ports at 3050 [size=8]
         I/O ports at 3078 [size=4]
         I/O ports at 3020 [size=16]
         Memory at 60203400 (32-bit, non-prefetchable) [size=512]
         Capabilities: [60] Power Management version 2
         Capabilities: [50] Message Signalled Interrupts: 64bit- 
Queue=0/0 Enable-

0000:00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host 
Controller (rev 80) (prog-if 10 [OHCI])
         Subsystem: Intel Corporation: Unknown device d601
         Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
         Memory at 37f00000 (32-bit, non-prefetchable) [size=4K]
         Capabilities: [d0] Message Signalled Interrupts: 64bit- 
Queue=0/0 Enable-

0000:00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host 
Controller (rev 80) (prog-if 10 [OHCI])
         Subsystem: Intel Corporation: Unknown device d601
         Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
         Memory at 37f01000 (32-bit, non-prefetchable) [size=4K]

0000:00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host 
Controller (rev 80) (prog-if 20 [EHCI])
         Subsystem: Intel Corporation: Unknown device d601
         Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
         Memory at 37f02000 (32-bit, non-prefetchable) [size=4K]
         Capabilities: [dc] Power Management version 2
         Capabilities: [d0] Message Signalled Interrupts: 64bit- 
Queue=0/0 Enable-

0000:00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 81)
         Subsystem: Intel Corporation: Unknown device d601
         Flags: 66MHz, medium devsel
         I/O ports at 3010 [size=16]
         Memory at 60203000 (32-bit, non-prefetchable) [size=1K]

0000:00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel 
PCI IDE Controller ATI (rev 80) (prog-if 8a [Master SecP PriP])
         Subsystem: Intel Corporation: Unknown device d601
         Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
         I/O ports at <unassigned>
         I/O ports at <unassigned>
         I/O ports at <unassigned>
         I/O ports at <unassigned>
         I/O ports at 3000 [size=16]
         Capabilities: [70] Message Signalled Interrupts: 64bit- 
Queue=0/0 Enable-

0000:00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge 
(rev 80)
         Subsystem: Intel Corporation: Unknown device d601
         Flags: bus master, 66MHz, medium devsel, latency 0

0000:00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge 
(rev 80) (prog-if 01 [Subtractive decode])
         Flags: bus master, 66MHz, medium devsel, latency 64
         Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
         I/O behind bridge: 00001000-00001fff
         Memory behind bridge: 60000000-600fffff

0000:01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown 
device 5a61 (prog-if 00 [VGA])
         Subsystem: Intel Corporation: Unknown device d601
         Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
         Memory at 40000000 (32-bit, prefetchable) [size=256M]
         I/O ports at 2000 [size=256]
         Memory at 60100000 (32-bit, non-prefetchable) [size=64K]
         Expansion ROM at fffe0000 [disabled] [size=128K]
         Capabilities: [50] Power Management version 2
         Capabilities: [80] Message Signalled Interrupts: 64bit- 
Queue=0/0 Enable-

0000:02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
         Subsystem: Intel Corporation: Unknown device d601
         Flags: bus master, medium devsel, latency 64, IRQ 21
         I/O ports at 1000 [size=256]
         Memory at 60000000 (32-bit, non-prefetchable) [size=256]
         Capabilities: [50] Power Management version 2





More information about the ubuntu-users mailing list