rtl 8139 cp problems

Vram lamsokvr at xprt.net
Tue Mar 7 16:04:56 UTC 2006


On Tue, 2006-03-07 at 09:20 +0100, Sven Richter wrote:
> Hi,
>  
>  i have a realtek 8139 c+ onboard nic.
>  When i installed kubuntu i wasnt able to set it up with dchp.
>  (Other boxes here did well with the dhcp server)
>  
>  Later i set it up manually with
>  ifconfig eth1 192.168.15.13 up
>  and added a route with
>  route add default gw 192.168.15.1 dev eth1
>  
>  ifconfig show the correct output, everthing seems to be fine.
>  I can ping the nic
>  ping 192.168.15.13
>  and it seems to work too.
>  
>  But if i want to ping the server
>  ping 192.168.15.1
>  it says:
>  ping 192.168.15.1 (.....) with .. bytes of data (this is the server)
>  from 192.168.15.13 icmp... destination host seems unreachable
>  
>  So i plugged another pci nic in, unfortunately again a realtek rtl 8139 c+
>  and disabled the onboard nic.
>  
>  But its the same again.
>  
>  I checked all settings with somebody helpful in the kubuntu irc channel,
>  and they are correct.
>  
>  Theres only one thing which seems strange.
>  
>  After booting two modules (8139too and 8139cp) are loaded.
>  If i remove the 8139cp module, restart the network and try to ping it says:
>  ping 192.168.15.1
>  eth0 network is unreachable
>  
>  And if remove the 9139too module and load the other one it says:
>  ifconfig eth0 ... up
>  SIOCSIFADDR: didnt find a suitable interface (its my translation because the 
> output comes in german )
>  
>  Does anybody have an idea where the problem could be.
>  I dont have anymore of them 
>  
> 
>  Thanks in Advance
>  Sven




Can you post


/sbin/ifconfig

/sbin/route -vn


Vram






More information about the ubuntu-users mailing list