Vanilla kernels and usb key automount

Paolo Ciarrocchi paolo.ciarrocchi at gmail.com
Sun Jul 16 19:26:12 UTC 2006 

On 7/16/06, Florian Diesch <diesch at spamfence.net> wrote:
> "Paolo Ciarrocchi" <paolo.ciarrocchi at gmail.com> wrote:
>
> > On 7/15/06, Florian Diesch <diesch at spamfence.net> wrote:
> >> "Paolo Ciarrocchi" <paolo.ciarrocchi at gmail.com> wrote:
> >>
> >> > is there anybody running vanilla kernels?
> >>
> >> Currently vanilla 2.6.16.16 with Suspend2 patch
> >>
> >> > I cannot manange to have HAL auto mounting my usb key....
> >>
> >> Works for me.
> >>
> >>
> >> What does lshal say about sda1 with vanilla and with the Ubuntu kernel?
> >
> > Good point,
> > it says nothin witha vanilla kernel while using an Ubuntu kernel:
>
>
> So most likly it's a problem with udev. Use
>  sudo udevcontrol log_priority=debug
> to tell udev to show debugging msgs. What does
> /var/log/syslog say when you insert your usb key?

Now it reports (with a vanilla kernel):
Jul 16 23:22:44 localhost kernel: hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010
Jul 16 23:22:45 localhost kernel: ehci_hcd 0000:00:1d.7: GetStatus
port 4 status 001803 POWER sig=j CSC CONNECT
Jul 16 23:22:45 localhost kernel: hub 1-0:1.0: port 4, status 0501,
change 0001, 480 Mb/s
Jul 16 23:22:45 localhost kernel: hub 1-0:1.0: debounce: port 4: total
100ms stable 100ms status 0x501
Jul 16 23:22:45 localhost kernel: ehci_hcd 0000:00:1d.7: port 4 high speed
Jul 16 23:22:45 localhost kernel: ehci_hcd 0000:00:1d.7: GetStatus
port 4 status 001005 POWER sig=se0 PE CONNECT
Jul 16 23:22:45 localhost kernel: usb 1-4: new high speed USB device
using ehci_hcd and address 2
Jul 16 23:22:45 localhost kernel: ehci_hcd 0000:00:1d.7: port 4 high speed
Jul 16 23:22:45 localhost kernel: ehci_hcd 0000:00:1d.7: GetStatus
port 4 status 001005 POWER sig=se0 PE CONNECT
Jul 16 23:22:45 localhost kernel: usb 1-4: default language 0x0409
Jul 16 23:22:45 localhost kernel: usb 1-4: new device strings: Mfr=1,
Product=2, SerialNumber=3
Jul 16 23:22:45 localhost kernel: usb 1-4: Product: Flash Disk
Jul 16 23:22:45 localhost kernel: usb 1-4: Manufacturer: USB
Jul 16 23:22:45 localhost kernel: usb 1-4: SerialNumber: AA0070005481932D
Jul 16 23:22:45 localhost kernel: usb 1-4: uevent
Jul 16 23:22:45 localhost kernel: usb 1-4: configuration #1 chosen from 1 choice
Jul 16 23:22:45 localhost kernel: usb 1-4: adding 1-4:1.0 (config #1,
interface 0)
Jul 16 23:22:45 localhost kernel: usb 1-4:1.0: uevent
Jul 16 23:22:45 localhost kernel: usb-storage 1-4:1.0: usb_probe_interface
Jul 16 23:22:45 localhost kernel: usb-storage 1-4:1.0:
usb_probe_interface - got id
Jul 16 23:22:45 localhost kernel: scsi0 : SCSI emulation for USB Mass
Storage devices
Jul 16 23:22:45 localhost kernel: drivers/usb/core/inode.c: creating file '002'
Jul 16 23:22:45 localhost kernel: usb-storage: device found at 2
Jul 16 23:22:45 localhost kernel: usb-storage: waiting for device to
settle before scanning
Jul 16 23:22:49 localhost pppd[3657]: Timeout waiting for PADO packets
Jul 16 23:22:49 localhost pppd[3657]: Unable to complete PPPoE Discovery
Jul 16 23:22:50 localhost kernel:   Vendor: Imation   Model:  USB
Flash Drive  Rev: 2.00
Jul 16 23:22:50 localhost kernel:   Type:   Direct-Access
        ANSI SCSI revision: 02
Jul 16 23:22:52 localhost kernel: ready
Jul 16 23:22:52 localhost kernel: SCSI device sda: 2029568 512-byte
hdwr sectors (1039 MB)
Jul 16 23:22:52 localhost kernel: sda: Write Protect is off
Jul 16 23:22:52 localhost kernel: sda: Mode Sense: 03 00 00 00
Jul 16 23:22:52 localhost kernel: sda: assuming drive cache: write through
Jul 16 23:22:52 localhost kernel: SCSI device sda: 2029568 512-byte
hdwr sectors (1039 MB)
Jul 16 23:22:52 localhost kernel: sda: Write Protect is off
Jul 16 23:22:52 localhost kernel: sda: Mode Sense: 03 00 00 00
Jul 16 23:22:52 localhost kernel: sda: assuming drive cache: write through
Jul 16 23:22:52 localhost kernel:  sda: sda1
Jul 16 23:22:52 localhost kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jul 16 23:22:52 localhost kernel: usb-storage: device scan complete

with udev set to debug:
paolo at Italia:~$ tail -f /var/log/syslog
Jul 16 23:25:11 localhost udevd-event[5022]: udev_event_run: seq 1755 finished
Jul 16 23:25:11 localhost udevd[1026]: udev_done: seq 1755, pid [5022]
exit with 0, 0 seconds old
Jul 16 23:25:11 localhost udevd-event[5023]: run_program:
'usb_device_name --export usbdev1.4'
Jul 16 23:25:11 localhost udevd-event[5023]: run_program:
'/lib/udev/usb_device_name' (stdout) 'USB_BUS=001'
Jul 16 23:25:11 localhost udevd-event[5023]: run_program:
'/lib/udev/usb_device_name' (stdout) 'USB_DEV=004'
Jul 16 23:25:11 localhost udevd-event[5023]: run_program:
'/lib/udev/usb_device_name' returned with status 0
Jul 16 23:25:11 localhost udevd-event[5023]: pass_env_to_socket:
passed 227 bytes to socket '/org/freedesktop/hal/udev_event',
Jul 16 23:25:11 localhost udevd-event[5023]: pass_env_to_socket:
passed -1 bytes to socket '/org/kernel/udev/monitor',
Jul 16 23:25:11 localhost udevd-event[5023]: udev_event_run: seq 1756 finished
Jul 16 23:25:11 localhost udevd[1026]: udev_done: seq 1756, pid [5023]
exit with 0, 0 seconds old
Jul 16 23:25:16 localhost udevd[1026]: udev_event_run: seq 1757
forked, pid [5027], 'add' 'scsi', 0 seconds old
Jul 16 23:25:16 localhost kernel:   Vendor: Imation   Model:  USB
Flash Drive  Rev: 2.00
Jul 16 23:25:16 localhost kernel:   Type:   Direct-Access
        ANSI SCSI revision: 02
Jul 16 23:25:16 localhost udevd-event[5027]: wait_for_sysfs: file
appeared after 0 loops
Jul 16 23:25:16 localhost udevd-event[5027]: pass_env_to_socket:
passed 243 bytes to socket '/org/freedesktop/hal/udev_event',
Jul 16 23:25:16 localhost udevd-event[5027]: pass_env_to_socket:
passed -1 bytes to socket '/org/kernel/udev/monitor',
Jul 16 23:25:16 localhost udevd-event[5027]: udev_event_run: seq 1757 finished
Jul 16 23:25:16 localhost udevd[1026]: udev_done: seq 1757, pid [5027]
exit with 0, 0 seconds old
Jul 16 23:25:16 localhost udevd[1026]: udev_event_run: seq 1758
forked, pid [5028], 'add' 'scsi_disk', 0 seconds old
Jul 16 23:25:16 localhost udevd-event[5028]: pass_env_to_socket:
passed 251 bytes to socket '/org/freedesktop/hal/udev_event',
Jul 16 23:25:16 localhost udevd-event[5028]: pass_env_to_socket:
passed -1 bytes to socket '/org/kernel/udev/monitor',
Jul 16 23:25:16 localhost udevd-event[5028]: udev_event_run: seq 1758 finished
Jul 16 23:25:16 localhost udevd[1026]: udev_done: seq 1758, pid [5028]
exit with 0, 0 seconds old
Jul 16 23:25:18 localhost kernel: ready
Jul 16 23:25:18 localhost kernel: SCSI device sda: 2029568 512-byte
hdwr sectors (1039 MB)
Jul 16 23:25:18 localhost kernel: sda: Write Protect is off
Jul 16 23:25:18 localhost kernel: sda: Mode Sense: 03 00 00 00
Jul 16 23:25:18 localhost kernel: sda: assuming drive cache: write through
Jul 16 23:25:18 localhost kernel: SCSI device sda: 2029568 512-byte
hdwr sectors (1039 MB)
Jul 16 23:25:18 localhost kernel: sda: Write Protect is off
Jul 16 23:25:18 localhost kernel: sda: Mode Sense: 03 00 00 00
Jul 16 23:25:18 localhost kernel: sda: assuming drive cache: write through
Jul 16 23:25:18 localhost udevd[1026]: udev_event_run: seq 1759
forked, pid [5030], 'add' 'block', 0 seconds old
Jul 16 23:25:18 localhost udevd[1026]: udev_event_run: seq 1761
forked, pid [5031], 'add' 'scsi_device', 0 seconds old
Jul 16 23:25:18 localhost kernel:  sda: sda1
Jul 16 23:25:18 localhost kernel: sd 2:0:0:0: Attached scsi removable disk sda
Jul 16 23:25:18 localhost udevd-event[5030]: run_program: 'usb_id -x'
Jul 16 23:25:18 localhost udevd-event[5030]: run_program:
'/lib/udev/usb_id' (stdout) 'ID_VENDOR=Imation'
Jul 16 23:25:18 localhost udevd-event[5030]: run_program:
'/lib/udev/usb_id' (stdout) 'ID_MODEL=USB_Flash_Drive'
Jul 16 23:25:18 localhost udevd-event[5030]: run_program:
'/lib/udev/usb_id' (stdout) 'ID_REVISION=2.00'
Jul 16 23:25:18 localhost udevd-event[5030]: run_program:
'/lib/udev/usb_id' (stdout)
'ID_SERIAL=Imation_USB_Flash_Drive_AA0070005481932D'
Jul 16 23:25:18 localhost udevd-event[5030]: run_program:
'/lib/udev/usb_id' (stdout) 'ID_TYPE=disk'
Jul 16 23:25:18 localhost udevd-event[5030]: run_program:
'/lib/udev/usb_id' (stdout) 'ID_BUS=usb'
Jul 16 23:25:18 localhost udevd-event[5030]: run_program:
'/lib/udev/usb_id' returned with status 0
Jul 16 23:25:18 localhost udevd-event[5030]: udev_rules_get_name: add
symlink 'disk/by-id/usb-Imation_USB_Flash_Drive_AA0070005481932D'
Jul 16 23:25:18 localhost udevd-event[5030]: run_program: 'path_id /block/sda'
Jul 16 23:25:18 localhost udevd-event[5030]: run_program:
'/lib/udev/path_id' (stdout) 'ID_PATH=usb-AA0070005481932D:0:0:0'
Jul 16 23:25:18 localhost udevd-event[5030]: run_program:
'/lib/udev/path_id' returned with status 0
Jul 16 23:25:18 localhost udevd-event[5030]: udev_rules_get_name: add
symlink 'disk/by-path/usb-AA0070005481932D:0:0:0'
Jul 16 23:25:18 localhost udevd-event[5030]: udev_rules_get_name: no
node name set, will use kernel name 'sda'
Jul 16 23:25:18 localhost udevd-event[5030]: create_node: creating
device node '/dev/sda'
Jul 16 23:25:18 localhost udevd-event[5030]: create_node: creating
symlink '/dev/disk/by-id/usb-Imation_USB_Flash_Drive_AA0070005481932D'
to '../../sda'
Jul 16 23:25:18 localhost udevd-event[5030]: create_node: creating
symlink '/dev/disk/by-path/usb-AA0070005481932D:0:0:0' to '../../sda'
Jul 16 23:25:18 localhost udevd-event[5030]: pass_env_to_socket:
passed 537 bytes to socket '/org/freedesktop/hal/udev_event',
Jul 16 23:25:18 localhost udevd-event[5030]: pass_env_to_socket:
passed -1 bytes to socket '/org/kernel/udev/monitor',
Jul 16 23:25:18 localhost udevd-event[5030]: udev_event_run: seq 1759 finished
Jul 16 23:25:18 localhost udevd[1026]: udev_done: seq 1759, pid [5030]
exit with 0, 0 seconds old
Jul 16 23:25:18 localhost udevd[1026]: udev_event_run: seq 1760
forked, pid [5042], 'add' 'block', 0 seconds old
Jul 16 23:25:18 localhost kernel: usb-storage: device scan complete
Jul 16 23:25:18 localhost udevd-event[5031]: pass_env_to_socket:
passed 257 bytes to socket '/org/freedesktop/hal/udev_event',
Jul 16 23:25:18 localhost udevd-event[5031]: run_program:
'/sbin/modprobe -Qba sd_mod'
Jul 16 23:25:18 localhost udevd-event[5031]: run_program:
'/sbin/modprobe' returned with status 1
Jul 16 23:25:18 localhost udevd-event[5031]: run_program:
'/sbin/modprobe -Qba sg'
Jul 16 23:25:18 localhost udevd-event[5031]: run_program:
'/sbin/modprobe' returned with status 1
Jul 16 23:25:18 localhost udevd-event[5031]: pass_env_to_socket:
passed -1 bytes to socket '/org/kernel/udev/monitor',
Jul 16 23:25:18 localhost udevd-event[5031]: udev_event_run: seq 1761 finished
Jul 16 23:25:18 localhost udevd[1026]: udev_done: seq 1761, pid [5031]
exit with 1, 0 seconds old
Jul 16 23:25:18 localhost udevd-event[5042]: udev_rules_get_name: add
symlink 'disk/by-id/usb-Imation_USB_Flash_Drive_AA0070005481932D-part1'
Jul 16 23:25:18 localhost udevd-event[5042]: udev_rules_get_name: add
symlink 'disk/by-path/usb-AA0070005481932D:0:0:0-part1'
Jul 16 23:25:18 localhost udevd-event[5042]: run_program: 'vol_id
--export /dev/.tmp-8-1'
Jul 16 23:25:18 localhost udevd-event[5042]: run_program:
'/lib/udev/vol_id' (stdout) 'ID_FS_USAGE=filesystem'
Jul 16 23:25:18 localhost udevd-event[5042]: run_program:
'/lib/udev/vol_id' (stdout) 'ID_FS_TYPE=vfat'
Jul 16 23:25:18 localhost udevd-event[5042]: run_program:
'/lib/udev/vol_id' (stdout) 'ID_FS_VERSION=FAT16'
Jul 16 23:25:18 localhost udevd-event[5042]: run_program:
'/lib/udev/vol_id' (stdout) 'ID_FS_UUID=315A-4D52'
Jul 16 23:25:18 localhost udevd-event[5042]: run_program:
'/lib/udev/vol_id' (stdout) 'ID_FS_LABEL='
Jul 16 23:25:18 localhost udevd-event[5042]: run_program:
'/lib/udev/vol_id' (stdout) 'ID_FS_LABEL_SAFE='
Jul 16 23:25:18 localhost udevd-event[5042]: run_program:
'/lib/udev/vol_id' returned with status 0
Jul 16 23:25:18 localhost udevd-event[5042]: udev_rules_get_name: add
symlink 'disk/by-uuid/315A-4D52'
Jul 16 23:25:18 localhost udevd-event[5042]: udev_rules_get_name: no
node name set, will use kernel name 'sda1'
Jul 16 23:25:18 localhost udevd-event[5042]: create_node: creating
device node '/dev/sda1'
Jul 16 23:25:18 localhost udevd-event[5042]: create_node: creating
symlink '/dev/disk/by-id/usb-Imation_USB_Flash_Drive_AA0070005481932D-part1'
to '../../sda1'
Jul 16 23:25:18 localhost udevd-event[5042]: create_node: creating
symlink '/dev/disk/by-path/usb-AA0070005481932D:0:0:0-part1' to
'../../sda1'
Jul 16 23:25:18 localhost udevd-event[5042]: create_node: creating
symlink '/dev/disk/by-uuid/315A-4D52' to '../../sda1'
Jul 16 23:25:18 localhost udevd-event[5042]: pass_env_to_socket:
passed 699 bytes to socket '/org/freedesktop/hal/udev_event',
Jul 16 23:25:18 localhost udevd-event[5042]: pass_env_to_socket:
passed -1 bytes to socket '/org/kernel/udev/monitor',
Jul 16 23:25:18 localhost udevd-event[5042]: udev_event_run: seq 1760 finished
Jul 16 23:25:18 localhost udevd[1026]: udev_done: seq 1760, pid [5042]
exit with 0, 0 seconds old


-- 
Paolo
http://paolo.ciarrocchi.googlepages.com
http://picasaweb.google.com/paolo.ciarrocchi

More information about the ubuntu-users mailing list