ALSA 'working' still no sound

[Jeremy Thompson]

Hi all,
Before I get into it -

Dapper Drake 6.06 LTS currently updated
Sound Blaster Audigy 2 ZS
Creative 5.1 surround sound speakers

My system was doing find till I decided to set some power saving options and
it went to hibernate. Now I don't get any sounds. I checked in the Volume
Control and everything was muted... unmuted. No sound. Restarted. see ALSA
loads, hear speakers pop, check and see volume settings are good, still no
sound.

I went through the Comprhensive Sound Guide and have the following output -

 Quote:
  jeremy at Main:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Audigy2 [Audigy 2 ZS [SB0350]], device 0: emu10k1 [ADC
Capture/Standard PCM Playback]
Subdevices: 32/32
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
Subdevice #8: subdevice #8
Subdevice #9: subdevice #9
Subdevice #10: subdevice #10
Subdevice #11: subdevice #11
Subdevice #12: subdevice #12
Subdevice #13: subdevice #13
Subdevice #14: subdevice #14
Subdevice #15: subdevice #15
Subdevice #16: subdevice #16
Subdevice #17: subdevice #17
Subdevice #18: subdevice #18
Subdevice #19: subdevice #19
Subdevice #20: subdevice #20
Subdevice #21: subdevice #21
Subdevice #22: subdevice #22
Subdevice #23: subdevice #23
Subdevice #24: subdevice #24
Subdevice #25: subdevice #25
Subdevice #26: subdevice #26
Subdevice #27: subdevice #27
Subdevice #28: subdevice #28
Subdevice #29: subdevice #29
Subdevice #30: subdevice #30
Subdevice #31: subdevice #31
card 0: Audigy2 [Audigy 2 ZS [SB0350]], device 2: emu10k1 efx [Multichannel
Capture/PT Playback]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 0: Audigy2 [Audigy 2 ZS [SB0350]], device 3: emu10k1 [Multichannel
Playback]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Audigy2 [Audigy 2 ZS [SB0350]], device 4: p16v [p16v]
Subdevices: 1/1
Subdevice #0: subdevice #0
 Quote:
  jeremy at Main:~$ lspci -v
***cut***
0000:00:0a.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
Subsystem: Creative Labs SB Audigy 2 ZS (SB0350)
Flags: bus master, medium devsel, latency 32, IRQ 193
I/O ports at e000 [size=64]
Capabilities: <available only to root>
***cut***
 Quote:
  ALSA Site -
Sound Blaster Audigy2 ZS Value CA0108 Details (emu10k1) [ANio] [MIDIio] (1)
(3)
No 96khz 24Bit support.
 Quote:
  jeremy at Main:~$ sudo modprobe snd-
***cut***
snd-emu10k1
***cut***
 Quote:
  jeremy at Main:~$ sudo cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

lp
psmouse
sbp2
sr_mod
snd-emu10k1
I dual boot so I know all the connections are good since I get sound in
Windows. Also I have loaded amaroK as my music player and have installed the
restricted drivers for mp3s and the like.

Again, this was working up to about 2 hours ago. The only thing I changed in
that time was trying to format a USB hard drive with GParted (installed w/
Synaptic) that failed. And the power saving options, which I've since turned
off.

I really need help, this was why I quit fedora to come here.

Thank you,

Jeremy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-users/attachments/20061223/cacc5bc0/attachment.html>