kismet problems

[stan]

On Wed, Nov 16, 2005 at 08:06:42AM -0500, 'Forum Post wrote:
> 
> The default drivers in Ubuntu are not patched for monitor mode. 
> 
> See my howto thread here:
> 
> http://ubuntuforums.org/showthread.php?t=79160
> 

Thanks, I was able to get one of my 2 cards working with this.

The one I did get working was a Linksys WPC11. The one I could not get
working was the Compaq  W200 USB oeinoc card.

The patch applied cleanly even though I was using one rev later orinoco
drivers from CVS orinoco-0.15rc3. I needed these to get the USB card
working.

BTW, why are these patches, why are they not merged with the orinoco modues
CVS?

Alos I'm puzzled by why the USB card does not work. Here is iwpriv for both
cards:


Script started on Thu Nov 17 23:58:48 2005
]0;root at brown2: ~root at brown2:~# iwpriv eth1
eth1      Available private ioctls :
          force_reset      (8BE0) : set   0       & get   0      
          card_reset       (8BE1) : set   0       & get   0      
          set_port3        (8BE2) : set   1 int   & get   0      
          get_port3        (8BE3) : set   0       & get   1 int  
          set_preamble     (8BE4) : set   1 int   & get   0      
          get_preamble     (8BE5) : set   0       & get   1 int  
          set_ibssport     (8BE6) : set   1 int   & get   0      
          get_ibssport     (8BE7) : set   0       & get   1 int  
          get_rid          (8BE9) : set   0       & get 1024 byte 
          set_prismheader  (8BEA) : set   1 int   & get   0      
          set_fcsbytes     (8BEC) : set   1 int   & get   0      

]0;root at brown2: ~root at brown2:~# iwpriv eth2
eth2      Available private ioctls :
          force_reset      (8BE0) : set   0       & get   0      
          card_reset       (8BE1) : set   0       & get   0      
          set_port3        (8BE2) : set   1 int   & get   0      
          get_port3        (8BE3) : set   0       & get   1 int  
          set_preamble     (8BE4) : set   1 int   & get   0      
          get_preamble     (8BE5) : set   0       & get   1 int  
          set_ibssport     (8BE6) : set   1 int   & get   0      
          get_ibssport     (8BE7) : set   0       & get   1 int  
          get_rid          (8BE9) : set   0       & get 1024 byte 
          set_prismheader  (8BEA) : set   1 int   & get   0      
          set_fcsbytes     (8BEC) : set   1 int   & get   0      

]0;root at brown2: ~root at brown2:~# 
Script done on Thu Nov 17 23:59:07 2005

Thye look identical to me. eth1 is the Compaq card BTW.

Thanks, again for the nice wwriteup, and all the help.

-- 
U.S. Encouraged by Vietnam Vote - Officials Cite 83% Turnout Despite Vietcong Terror 
- New York Times 9/3/1967