Integration of Module for SiS Sound Controller needed

Rick Rocker debian_noob at web.de
Wed Nov 9 11:32:20 UTC 2005 


crimsun at fungus.sh.nu schrieb am 09.11.05 12:20:11:
> 
> On Wed, Nov 09, 2005 at 11:12:15AM +0100, Rick Rocker wrote:
> > But, it doesn´t give me sound output. How can that be the right one?
> > Can you, please, elaborate on this?
> > I ask because Ubuntu is the only distro where sound doesn´t work
> > for me.  
> 
> Attach lspci -vv output. I suspect you need a correct ac97_quirk
> parameter.

$ lspci -vv
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 51)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 64
        Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
        Capabilities: <available only to root>

0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 0003 (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
        Memory behind bridge: ed000000-edffffff
        Prefetchable memory behind bridge: f0000000-f7ffffff
        BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-

0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] (rev 36)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master])
        Subsystem: Unknown device 1734:1047
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 128
        Interrupt: pin ? routed to IRQ 16
        Region 0: I/O ports at <unassigned>
        Region 1: I/O ports at <unassigned>
        Region 2: I/O ports at <unassigned>
        Region 3: I/O ports at <unassigned>
        Region 4: I/O ports at 2480 [size=16]
        Capabilities: <available only to root>

0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
        Subsystem: Unknown device 1734:105e
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 173 (13000ns min, 2750ns max)
        Interrupt: pin C routed to IRQ 18
        Region 0: I/O ports at 1400 [size=256]
        Region 1: I/O ports at 1000 [size=128]
        Capabilities: <available only to root>

0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
        Subsystem: Unknown device 1734:1047
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (20000ns max)
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
        Subsystem: Unknown device 1734:1047
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (20000ns max)
        Interrupt: pin B routed to IRQ 21
        Region 0: Memory at ec001000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
        Subsystem: Unknown device 1734:1047
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (20000ns max)
        Interrupt: pin C routed to IRQ 22
        Region 0: Memory at ec002000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
        Subsystem: Unknown device 1734:1047
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (20000ns max)
        Interrupt: pin D routed to IRQ 23
        Region 0: Memory at ec003000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <available only to root>

0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
        Subsystem: Unknown device 1734:1047
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 173 (13000ns min, 2750ns max)
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at 1800 [size=256]
        Region 1: Memory at ec004000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <available only to root>

0000:00:05.0 IDE interface: Silicon Integrated Systems [SiS]: Unknown device 0180 (rev 01) (prog-if 85 [Master SecO PriO])
        Subsystem: Unknown device 1734:1047
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 17
        Region 0: I/O ports at 24b0 [size=8]
        Region 1: I/O ports at 24a4 [size=4]
        Region 2: I/O ports at 24a8 [size=8]
        Region 3: I/O ports at 24a0 [size=4]
        Region 4: I/O ports at 2490 [size=16]
        Region 5: I/O ports at 2400 [size=128]
        Capabilities: <available only to root>

0000:00:08.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 61) (prog-if 10 [OHCI])
        Subsystem: Unknown device 1734:1026
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 96 (3000ns min, 6000ns max), Cache Line Size: 0x04 (16 bytes)
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at ec005000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <available only to root>

0000:00:12.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Compex FN22-3(A) LinxPRO Ethernet Adapter
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 17
        Region 0: I/O ports at 1c00 [size=256]
        Region 1: Memory at ec007000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <available only to root>

0000:00:14.0 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem (rev 04) (prog-if 00 [Generic])
        Subsystem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (250ns min, 15500ns max), Cache Line Size: 0x04 (16 bytes)
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at ec006000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at 2000 [size=256]
        Capabilities: <available only to root>

0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1) (prog-if 00 [VGA])
        Subsystem: LeadTek Research Inc.: Unknown device 291f
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at ed000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Capabilities: <available only to root>



Can you tell me, please, how you can read a solution from this list
for my sound problem?


______________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193

More information about the ubuntu-users mailing list