Advice needed on boot problem
R Kimber
rkimber at ntlworld.com
Thu May 12 14:46:00 UTC 2005
On Thu, 12 May 2005 15:32:23 +0200
"Uli Wachowitz" <uli at wach-o-witz.de> wrote:
> On Thu, 12 May 2005 14:05:24 +0100, R Kimber wrote
> > /dev/hdc7 clean ....etc
> > ... fail
>
> Please post the output of 'dmesg' and your '/etc/fstab'. Maybe this
> gives us a hint.
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda3 / ext3 defaults,errors=remount-ro 0 1
/dev/hdc1 /home ext3 defaults 0 2
/dev/hdc6 /mnt/audio ext3 defaults 0 2
/dev/hda2 /mnt/common vfat defaults 0 0
/dev/hdc8 /mnt/dat ext3 defaults 0 2
/dev/hda12 /mnt/data1 ext3 defaults 0 2
/dev/hda13 /mnt/data2 ext3 defaults 0 2
/dev/sda4 /mnt/pd ext2 noauto,defaults 0 2
/dev/hdc5 /mnt/scratch ext3 defaults 0 2
/dev/hda10 /mnt/ubuntu386 ext3 defaults 0 2
/dev/hda7 /opt ext3 defaults 0 2
/dev/hda8 /tmp ext3 defaults 0 2
/dev/hda6 /usr ext3 defaults 0 2
/dev/hdc7 /usr/local ext3 defaults 0 2
/dev/hda5 /var ext3 defaults 0 2
/dev/hda9 none swap sw 0 0
/dev/hdc2 none swap sw 0 0
/dev/hde /media/ cdrom0 udf,iso9660 ro,user,noauto 0 0
DMESG:
Bootdata ok (command line is root=/dev/hda3 ro console=tty0 quiet
splash) Linux version 2.6.11-1-amd64-k8-smp (buildd at yellow) (gcc
version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 SMP Fri Feb 11 15:42:34 UTC
2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable) BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved) BIOS-e820: 0000000000100000 -
000000007fee0000 (usable) BIOS-e820: 000000007fee0000 -
000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 -
000000007fef0000 (ACPI data) BIOS-e820: 000000007fef0000 -
000000007ff00000 (reserved) BIOS-e820: 00000000fec00000 -
0000000100000000 (reserved) ACPI: RSDP (v000
VIAK8 ) @ 0x00000000000f6d50 ACPI: RSDT
(v001 VIAK8 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee3000
ACPI: FADT (v001 VIAK8 AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x000000007fee3040 ACPI: MADT (v001 VIAK8 AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x000000007fee7b40 ACPI: DSDT (v001 VIAK8 AWRDACPI
0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 Scanning NUMA topology
in Northbridge 24 Number of nodes 2 Node 0 MemBase 0000000000000000
Limit 000000007fee0000 Skipping disabled node 1
Using node hash shift of 24
Bootmem setup node 0 0000000000000000-000000007fee0000
On node 0 totalpages: 524000
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 519904 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ e8000000 size 128 MB
CPU 1: aperture @ e8000000 size 128 MB
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro console=tty0 quiet splash
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 1603.694 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 2055340k/2096000k available (1900k kernel code, 0k reserved,
1031k data, 192k init) Calibrating delay loop... 3145.72 BogoMIPS
(lpj=1572864) Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(1) -> Node 0
ACPI: Looking for DSDT in initrd... not found!
Using local APIC NMI watchdog using perfctr0
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(1) -> Node 0
CPU0: AMD Opteron(tm) Processor 242 stepping 01
per-CPU timeslice cutoff: 1024.37 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 rip 6000 rsp ffff81007fa47f58
Initializing CPU#1
Calibrating delay loop... 3203.07 BogoMIPS (lpj=1601536)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(1) -> Node 0
AMD Opteron(tm) Processor 242 stepping 01
Total of 2 processors activated (6348.80 BogoMIPS).
Using local APIC timer interrupts.
Detected 12.528 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
time.c: Using PIT/TSC based timekeeping.
Brought up 2 CPUs
CPU0 attaching sched-domain:
domain 0: span 03
groups: 01 02
domain 1: span 03
groups: 03
CPU1 attaching sched-domain:
domain 0: span 03
groups: 02 01
domain 1: span 03
groups: 03
checking if image is initramfs...it isn't (bad gzip magic numbers);
looks like an initrd NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050125
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas at hp.com
** so I can fix the driver.
agpgart: Detected AGP bridge 0
agpgart: Maximum main memory to use for agp memory: 1918M
agpgart: AGP aperture is 128M @ 0xe8000000
PCI-DMA: Disabling IOMMU.
pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
pnp: 00:01: ioport range 0x5000-0x500f has been reserved
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1115906030.426:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
inotify device minor=63
Linux agpgart interface v0.100 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1
ACPI: PS/2 Mouse Controller [PS2M] at irq 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing
enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 128Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
Restarting tasks...<6> Strange, khubd not stopped
Strange, kswapd0 not stopped
Strange, kseriod not stopped
done
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4296KiB [1 disk] into ram disk... |/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|done. VFS: Mounted root (cramfs filesystem)
readonly. Freeing unused kernel memory: 192k freed ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (47 C) NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming
33MHz system bus speed for PIO modes; override with idebus=xx PDC20269:
IDE controller at PCI slot 0000:00:08.0 PCI: 0000:00:08.0 has
unsupported PM cap regs version (1) ACPI: PCI interrupt 0000:00:08.0[A]
-> GSI 19 (level, low) -> IRQ 19 PDC20269: chipset revision 2 PDC20269:
100% native mode on irq 19 ide2: BM-DMA at 0xd000-0xd007, BIOS
settings: hde:pio, hdf:pio ide3: BM-DMA at 0xd008-0xd00f, BIOS
settings: hdg:pio, hdh:pio Probing IDE interface ide2... hde: _NEC
DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive ide2 at 0xc000-0xc007,0xc402 on
irq 19 Probing IDE interface ide3... VP_IDE: IDE controller at PCI slot
0000:00:0f.0 ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using
IRQ 20 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 ACPI: PCI
interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 20 VP_IDE:
chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6Y120L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(133) hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11
p12 p13 > Probing IDE interface ide1...
hdc: Maxtor 6Y120L0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 128KiB
hdc: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(133) hdc: cache flushes supported
/dev/ide/host0/bus1/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 >
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
Stopping tasks: ===|
Freeing memory... -\|/done (533 pages freed)
Restarting tasks... done
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1052216k swap on /dev/hda9. Priority:-1 extents:1
Adding 1052248k swap on /dev/hdc2. Priority:-2 extents:1
EXT3 FS on hda3, internal journal
hde: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Real Time Clock Driver v1.12
ts: Compaq touchscreen protocol output
Capability LSM initialized
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda12, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda13, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker
FDC 0 is a post-1991 82077
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
bttv0: Bt878 (rev 17) at 0000:00:05.0, irq: 16, latency: 32, mmio:
0xfb015000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID
is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
tveeprom: Hauppauge: model = 44805, rev = D135, serial# = 2845002
tveeprom: tuner = Temic 4066FY5 (idx = 35, type = 18)
tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010)
tveeprom: audio_processor = None (type = 0)
bttv0: using tuner=18
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/
a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54
(PV951),ta8874z bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw] tuner: type set to
18 (Temic PAL_I (4066 FY5)) by bt878 #0 [sw] bttv0: registered device
video0 bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
ACPI: PCI interrupt 0000:00:05.1[A] -> GSI 16 (level, low) -> IRQ 16
tg3.c:v3.21 (February 8, 2005)
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-
bit) 10/100/1000BaseT Ethernet 00:0c:76:6f:0f:2c eth0: RXcsums[1]
LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] USB
Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt
Link [ALKB] BIOS reported IRQ 0, using IRQ 21 ACPI: PCI Interrupt Link
[ALKB] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21
(level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:10.0: irq 21, io
base 0xd800 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 1 hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#2) uhci_hcd 0000:00:10.1: irq 21, io base 0xdc00
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#3) uhci_hcd 0000:00:10.2: irq 21, io base 0xe000
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.5 to 64
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-2: new full speed USB device using uhci_hcd and address 3
NET: Registered protocol family 17
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
Vendor: IOMEGA Model: ZIP 750 Rev: 77.u
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff803a3240(lo)
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 344 bytes per
conntrack eth0: no IPv6 routers present
sda: Spinning up disk.........ready
SCSI device sda: 1470500 512-byte hdwr sectors (753 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 10 08
sda: assuming drive cache: write through
SCSI device sda: 1470500 512-byte hdwr sectors (753 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 10 08
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p4
Thanks
--
Richard Kimber
http://www.psr.keele.ac.uk/
More information about the ubuntu-users
mailing list