Installation report for Acer TravelMate 8100
Vincenzo Di Massa
hawk78_it at yahoo.it
Tue Mar 8 16:06:38 UTC 2005
I just installend on a Acer TravelMate 4601WLCi:
The problem installing was about apic and cardbus.
I installed using:
*-expert noapic
When it asks to detect pcmcia just say NO!
Then you have to uninstall pcmcia services before you reboot into hoary.
I attach an xorg.conf usefull for tv-out.
Alle 15:41, martedì 08 marzo 2005, Gary Coady ha scritto:
> Hi there,
> Attached is an installation report for the Acer TravelMate 8104WLMi. Oh,
> it's the daily build for x86 (8 March 2004). It required the acpi=off
> parameter before it would install.
>
> I don't want to send too large a mail to the list, so please ask if you
> want any of the more detailed information.
>
> I'm copying one interesting part of the syslog, though. I don't
> currently have a CardBus card to test if it's working - but I'm willing
> to test anything else that I can (including compiling/testing kernel
> patches).
>
> There's no serial console, so I don't see any easy way to debug early
> kernel startup.
>
> Gary.
>
> Mar 8 12:59:43 kernel: Linux Kernel Card Services
> Mar 8 12:59:43 kernel: options: [pci] [cardbus] [pm]
> Mar 8 12:59:43 kernel: Yenta: CardBus bridge found at 0000:06:09.0
> [1025:0070]
> Mar 8 12:59:43 kernel: Yenta O2: res at 0x94/0xD4: ea/00
> Mar 8 12:59:43 kernel: Yenta O2: enabling read prefetch/write burst
> Mar 8 12:59:43 kernel: Yenta: ISA IRQ mask 0x00b8, PCI irq 11
> Mar 8 12:59:43 kernel: Socket status: 30000006
> Mar 8 12:59:43 kernel: Yenta: CardBus bridge found at 0000:06:09.1
> [1025:0070]
> Mar 8 12:59:43 kernel: irq 11: nobody cared (try booting with the
> "irqpoll" option.
> Mar 8 12:59:43 kernel: [<c012e40b>] __report_bad_irq+0x31/0x77
> Mar 8 12:59:43 kernel: [<c012e4de>] note_interrupt+0x75/0x9b
> Mar 8 12:59:43 kernel: [<c012dec2>] __do_IRQ+0xd3/0x111
> Mar 8 12:59:43 kernel: [<c0104cc5>] do_IRQ+0x19/0x24
> Mar 8 12:59:43 kernel: [<c0103966>] common_interrupt+0x1a/0x20
> Mar 8 12:59:43 kernel: [<c0119e38>] __do_softirq+0x2c/0x79
> Mar 8 12:59:43 kernel: [<c0119ea7>] do_softirq+0x22/0x26
> Mar 8 12:59:43 kernel: [<c012dd98>] irq_exit+0x29/0x34
> Mar 8 12:59:43 kernel: [<c0104cca>] do_IRQ+0x1e/0x24
> Mar 8 12:59:43 kernel: [<c0103966>] common_interrupt+0x1a/0x20
> Mar 8 12:59:43 kernel: [<c010b480>] delay_tsc+0xb/0x15
> Mar 8 12:59:43 kernel: [<c019e208>] __delay+0xc/0xe
> Mar 8 12:59:43 kernel: [<f88d8a90>] yenta_probe_irq+0xa9/0x102
> [yenta_socket]
> Mar 8 12:59:43 kernel: [<f88d8c37>]
> yenta_get_socket_capabilities+0x2d/0x4e [yenta_socket]
> Mar 8 12:59:43 kernel: [<f88d8ee3>] yenta_probe+0x19b/0x1e5
> [yenta_socket] Mar 8 12:59:43 kernel: [<c01a40c1>]
> pci_device_probe_static+0x2e/0x41 Mar 8 12:59:43 kernel: [<c01a40f3>]
> __pci_device_probe+0x1f/0x32 Mar 8 12:59:43 kernel: [<c01a4122>]
> pci_device_probe+0x1c/0x31
> Mar 8 12:59:43 kernel: [<c01edbe6>] driver_probe_device+0x36/0x54
> Mar 8 12:59:43 kernel: [<c01edcbf>] driver_attach+0x39/0x6e
> Mar 8 12:59:43 kernel: [<c01ee03a>] bus_add_driver+0x5e/0x80
> Mar 8 12:59:43 kernel: [<c01ee3b7>] driver_register+0x2d/0x31
> Mar 8 12:59:43 kernel: [<c01a42d3>] pci_register_driver+0x57/0x6a
> Mar 8 12:59:43 kernel: [<f882000a>] yenta_socket_init+0xa/0xc
> [yenta_socket]
> Mar 8 12:59:43 kernel: [<c0129a05>] sys_init_module+0xd4/0x1c3
> Mar 8 12:59:43 kernel: [<c0102ff7>] syscall_call+0x7/0xb
> Mar 8 12:59:43 kernel: handlers:
> Mar 8 12:59:43 kernel: [<f8842665>] (usb_hcd_irq+0x0/0x4e [usbcore])
> Mar 8 12:59:43 kernel: [<f8842665>] (usb_hcd_irq+0x0/0x4e [usbcore])
> Mar 8 12:59:43 kernel: [<f8842665>] (usb_hcd_irq+0x0/0x4e [usbcore])
> Mar 8 12:59:43 kernel: [<f8842665>] (usb_hcd_irq+0x0/0x4e [usbcore])
> Mar 8 12:59:43 kernel: [<f88a11ce>] (ohci_irq_handler+0x0/0x602
> [ohci1394]) Mar 8 12:59:43 kernel: [<f88d7717>] (yenta_interrupt+0x0/0x27
> [yenta_socket])
> Mar 8 12:59:43 kernel: Disabling IRQ #11
> Mar 8 12:59:43 kernel: Yenta: ISA IRQ mask 0x00b8, PCI irq 10
> Mar 8 12:59:43 kernel: Socket status: 30000006
> Mar 8 12:59:43 kernel: PCI: Enabling device 0000:06:09.3 (0080 -> 0082)
> Mar 8 12:59:43 kernel: PCI: No IRQ known for interrupt pin A of device
> 0000:06:09.3. Please try using pci=biosirq.
> Mar 8 12:59:43 kernel: Yenta: CardBus bridge found at 0000:06:09.3
> [1025:0070]
> Mar 8 12:59:43 kernel: Yenta: ISA IRQ mask 0x00b8, PCI irq 0
> Mar 8 12:59:43 kernel: Socket status: 30000410
-------------- next part --------------
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
# sudo dpkg-reconfigure xserver-xorg
Section "Device"
Identifier "FGLRX"
Driver "fglrx"
#TV
Option "NoTV" "yes"
Option "MonitorLayout" "LVDS, NONE"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Monitor"
Identifier "LCD Panel"
Option "DPMS"
EndSection
Section "Device"
Identifier "TV Device"
Driver "fglrx"
Option "NoTV" "no"
Option "TVStandard" "PAL-B"
Option "MonitorLayout" "NONE, STV"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Monitor"
Identifier "TV Monitor"
# HorizSync 30 - 90
# VertRefresh 50 - 70
HorizSync 31.5 - 37.9
VertRefresh 50 - 70
Option "DPMS"
EndSection
Section "Screen"
Identifier "LCD"
Device "FGLRX"
Monitor "LCD Panel"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "TVOUT"
Device "TV Device"
Monitor "TV Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
#Modes "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "LCD"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
Section "ServerLayout"
Identifier "TV"
Screen "TVOUT"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "v4l"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
More information about the ubuntu-users
mailing list