sata drive will not mount

[daphatbell at gmail.com]

No, I have two 80gb IDE hd's and one SATA drive. 

The output is the same as the original post, which is:

SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
SCSI device sda: drive cache: write back
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0


Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        2697    21663621    7  HPFS/NTFS
/dev/sda2            2698       24321   173694780    f  W95 Ext'd (LBA)
/dev/sda5            2698        7876    41600286    7  HPFS/NTFS
/dev/sda6            7877       12976    40965718+   7  HPFS/NTFS
/dev/sda7           12977       18649    45568341    7  HPFS/NTFS
/dev/sda8           18650       24321    45560308+   7  HPFS/NTFS

Thanks for your help. Looks like this is a much more difficult problem than others 
that are posted here! :-O 


On 19 Jul 2005 at 10:36, Ed Fletcher wrote:

> You said that your computer has three sata drives but your fstab
> shows only one.  The other is an IDE drive.  Does that mount OK?  Do
> you have more entries in fstab than you've shown here?  Please post
> the full file.  Also post the output of 'sudo fdisk -l' and 'mount'.
> 
> Ed