built kernel 2.6.10

[Matt Zimmerman]

On Sat, Jan 08, 2005 at 06:02:23PM +0100, ultrakorne wrote:

> hi, ihave build a kernel 2.6.10, and have some problems came out.. from 
> the dmesg
> 
> pciehp: add_host_bridge: status 5
> pciehp: Fails to gain control of native hot-plug
> 
> pcihp cant be loaded:
> ultra at doom:~/kernel $ sudo modprobe pciehp
> FATAL: Error inserting pciehp 
> (/lib/modules/2.6.10.080104/kernel/drivers/pci/hotplug/pciehp.ko): No 
> such device
> 
> with the 2.6.8.1 i had this module inserted correctly

Does your hardware support PCI hot-plugging?

> and this:
> ACPI: Thermal Zone [THRM] (55 C)
> codec_write 0: semaphore is not ready for register 0x18
> codec_write 0: semaphore is not ready for register 0x18
> codec_write 0: semaphore is not ready for register 0x18
> codec_write 0: semaphore is not ready for register 0x2
> codec_write 0: semaphore is not ready for register 0x2
> codec_write 0: semaphore is not ready for register 0x2
> codec_write 0: semaphore is not ready for register 0x12
> codec_write 0: semaphore is not ready for register 0x12
> codec_write 0: semaphore is not ready for register 0x12
> codec_write 0: semaphore is not ready for register 0x4
> codec_write 0: semaphore is not ready for register 0x4
> codec_write 0: semaphore is not ready for register 0x4
> codec_write 0: semaphore is not ready for register 0x2
> codec_write 0: semaphore is not ready for register 0x18
> codec_write 0: semaphore is not ready for register 0x3a
> codec_write 0: semaphore is not ready for register 0x2a
> acpi-cpufreq: CPU0 - ACPI performance management activated.
> 
> someone can give me some tips about those problems?

I'm not sure about these messages, but unless you are also experiencing a
functional problem, I wouldn't be too concerned.

-- 
 - mdz