lm-sensors

[emperor]

Looks like you do not have to run the "mkdev.sh" script file after all,
just load "i2c-dev.ko" which will create the dev's.

sudo modprobe i2c-dev

After I ran sensors-detect and then manually load the modules, I can
detect all my sensors OK. However, I can not seem to figure out how to
load the modules at boot time; nothing seems to work yet!

Loading my sensors manually as root or sudo:

modprobe i2c-dev
modprobe i2c-sensor
modprobe i2c-viapro
modprobe i2c-isa
modprobe lm90
modprobe it87

Then run "sensors" as root (sudo -s), I get:

root at linXos:~ # sensors
it87-isa-0290
Adapter: ISA adapter
VCore 1:   +1.76 V  (min =  +4.08 V, max =  +4.08 V)   ALARM
VCore 2:   +3.26 V  (min =  +4.08 V, max =  +4.08 V)   ALARM
+3.3V:     +5.95 V  (min =  +8.16 V, max =  +8.16 V)   ALARM
+5V:       +4.95 V  (min =  +6.85 V, max =  +6.85 V)   ALARM
+12V:      +9.92 V  (min = +16.32 V, max = +16.32 V)   ALARM
-12V:     -15.95 V  (min =  +3.93 V, max =  +3.93 V)   ALARM
-5V:       -5.95 V  (min =  +4.03 V, max =  +4.03 V)   ALARM
Stdby:     +3.84 V  (min =  +6.85 V, max =  +6.85 V)   ALARM
VBat:      +0.00 V
fan1:     2083 RPM  (min =    0 RPM, div = 8)
fan2:     3443 RPM  (min =    0 RPM, div = 8)
fan3:        0 RPM  (min =    0 RPM, div = 8)
M/B Temp:    +33°C  (low  =    -1°C, high =    -1°C)   sensor =
thermistor
CPU Temp:    +45°C  (low  =    -1°C, high =    -1°C)   sensor =
thermistor
Temp3:       +44°C  (low  =    -1°C, high =    -1°C)   sensor =
thermistor

lm90-i2c-1-4c
Adapter: SMBus Via Pro adapter at 5000
M/B Temp:    +35°C  (low  =    +0°C, high =   +70°C)
CPU Temp:  +56.9°C  (low  =  +0.0°C, high = +70.0°C)
M/B Crit:    +85°C  (hyst =   +75°C)
CPU Crit:    +85°C  (hyst =   +75°C)

tda9887-i2c-0-43
Adapter: saa7133[0]

LG NTSC -i2c-0-60
Adapter: saa7133[0]


-- 
emperor