cdrecord???
David Williamson
nospam1 at nullcutter.com
Sat Oct 30 21:22:50 UTC 2004
On Sat, 2004-10-30 at 16:07 -0500, TekMate wrote:
> Do a lsmod and post the output here. The output of dmesg would be
> usefull as well.
Thanks... here they are - it's a novel in length:
#lsmod
Module Size Used by
ext3 109544 0
jbd 54552 1 ext3
hfs 41860 0
hfsplus 54532 0
isofs 33976 0
udf 79876 1
nls_iso8859_1 4352 1
nls_cp437 6016 1
vfat 13312 1
fat 41792 1 vfat
proc_intf 3968 0
cpufreq_powersave 2048 0
cpufreq_userspace 5336 0
freq_table 4356 0
button 6936 0
ac 5132 0
battery 9740 0
ipv6 230020 8
af_packet 20872 2
e100 30208 0
eepro100 28300 0
mii 4864 2 e100,eepro100
ohci1394 32004 0
snd_intel8x0 33068 3
snd_ac97_codec 59268 1 snd_intel8x0
snd_pcm_oss 48168 0
snd_mixer_oss 16640 3 snd_pcm_oss
snd_pcm 85540 2 snd_intel8x0,snd_pcm_oss
snd_timer 23172 1 snd_pcm
snd_page_alloc 11144 2 snd_intel8x0,snd_pcm
gameport 4736 1 snd_intel8x0
snd_mpu401_uart 7296 1 snd_intel8x0
snd_rawmidi 23232 1 snd_mpu401_uart
snd_seq_device 7944 1 snd_rawmidi
snd 50660 11
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9824 3 snd
ata_piix 7940 0
libata 36356 1 ata_piix
hw_random 5652 0
ehci_hcd 27780 0
sd_mod 20480 4
usb_storage 59200 2
uhci_hcd 29328 0
usbcore 104292 5 ehci_hcd,usb_storage,uhci_hcd
pciehp 83948 0
shpchp 87276 0
pci_hotplug 30640 2 pciehp,shpchp
intel_mch_agp 10000 0
intel_agp 20512 1
agpgart 31784 3 intel_mch_agp,intel_agp
floppy 54996 0
pcspkr 3816 0
rtc 12216 0
md 44744 0
dm_mod 51068 1
capability 4872 0
commoncap 7168 1 capability
nvidia 4821428 12
parport_pc 32064 1
lp 10436 0
parport 37320 2 parport_pc,lp
sbp2 22408 0
ieee1394 100536 2 ohci1394,sbp2
ide_cd 38276 1
evdev 9088 0
tsdev 7168 0
mousedev 10124 1
psmouse 17800 0
sr_mod 15780 0
scsi_mod 115148 5 libata,sd_mod,usb_storage,sbp2,sr_mod
cdrom 35872 2 ide_cd,sr_mod
reiserfs 207600 2
ide_generic 1664 0
ide_disk 16768 2
piix 12576 1
ide_core 125272 5
usb_storage,ide_cd,ide_generic,ide_disk,piix
unix 25904 958
fan 4236 0
thermal 13200 0
processor 17712 1 thermal
font 8576 0
vesafb 6688 0
cfbcopyarea 3968 1 vesafb
cfbimgblt 3200 1 vesafb
cfbfillrect 3712 1 vesafb
#dmesg
6)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
TANA P0P3 AC97 USB0 USB1 USB2 USB3 USB7 UAR1 SLPB
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4116 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
vesafb: probe of vesafb0 failed with error -6
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6Y200P0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63,
UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1
hdc: PLEXTOR DVDR PX-708A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: replayed 41 transactions in 7 seconds
ReiserFS: hda1: Using r5 hash to sort names
ReiserFS: hda1: Removing [282 4244 0x0 SD]..done
ReiserFS: hda1: There were 1 uncompleted unlinks/truncates. Completed
SCSI subsystem initialized
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
ts: Compaq touchscreen protocol output
mice: PS/2 mouse device common for all mice
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <bcollins at debian.org>
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul
27 07:55:38 PDT 2004
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
cdrom: open failed.
Real Time Clock Driver v1.12
input: PC Speaker
inserting floppy driver for 2.6.8.1-3-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: AGP aperture is 64M @ 0xf8000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 169, io base 0000cc00
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 177, io base 0000d000
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 185, io base 0000d400
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 169, io base 0000d800
usb 1-1: new full speed USB device using address 2
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-2: new full speed USB device using address 3
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.1: new full speed USB device using address 4
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: GENERIC Model: USB Storage-SMC Rev: 010K
Type: Direct-Access ANSI SCSI revision: 02
Vendor: GENERIC Model: USB Storage-CFC Rev: 010K
Type: Direct-Access ANSI SCSI revision: 02
Vendor: GENERIC Model: USB Storage-MMC Rev: 010K
Type: Direct-Access ANSI SCSI revision: 02
Vendor: GENERIC Model: USB Storage-MSC Rev: 010K
Type: Direct-Access ANSI SCSI revision: 02
USB Mass Storage device found at 4
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 193, pci mem f8a15c00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 1-1: USB disconnect, address 2
usb 1-2: USB disconnect, address 3
usb 1-2.1: USB disconnect, address 4
usb 5-1: new high speed USB device using address 2
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
hw_random hardware driver 1.0.0 loaded
usb 5-2: new high speed USB device using address 3
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
usb 5-2.1: new high speed USB device using address 4
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: GENERIC Model: USB Storage-SMC Rev: 010K
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Vendor: GENERIC Model: USB Storage-CFC Rev: 010K
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 1
Vendor: GENERIC Model: USB Storage-MMC Rev: 010K
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdc at scsi1, channel 0, id 0, lun 2
Vendor: GENERIC Model: USB Storage-MSC Rev: 010K
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdd at scsi1, channel 0, id 0, lun 3
USB Mass Storage device found at 4
libata version 1.02 loaded.
ata_piix version 1.02
ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 185
ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 185
ata1: SATA port has no device.
scsi2 : ata_piix
ata2: SATA port has no device.
scsi3 : ata_piix
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49591 usecs
intel8x0: clocking to 48000
ohci1394: $Rev: 1223 $ Ben Collins <bcollins at debian.org>
ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 17 (level, low) -> IRQ 201
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[201]
MMIO=[feaff000-feaff7ff] Max Packet=[2048]
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<saw at saw.sw.com.sg> and others
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 209
eth0: 0000:02:08.0, 00:0C:F1:AF:0B:84, IRQ 209.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xed626fe2).
e100: Intel(R) PRO/100 Network Driver, 3.0.18
e100: Copyright(c) 1999-2004 Intel Corporation
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000cf10000af0b84]
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02cc0c0(lo)
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
eth0: no IPv6 routers present
SCSI device sda: 32000 512-byte hdwr sectors (16 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 32000 512-byte hdwr sectors (16 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
/dev/scsi/host1/bus0/target0/lun0: p1
usb 5-2.4: new high speed USB device using address 5
scsi4 : SCSI emulation for USB Mass Storage devices
Vendor: Maxtor 5 Model: 4610H6 Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sde: 90045648 512-byte hdwr sectors (46103 MB)
sde: assuming drive cache: write through
/dev/scsi/host4/bus0/target0/lun0: p1
Attached scsi disk sde at scsi4, channel 0, id 0, lun 0
USB Mass Storage device found at 5
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev sde1.
udf: registering filesystem
UDF-fs: No partition found (1)
Unable to identify CD-ROM format.
HFS+-fs: unable to find HFS+ superblock
VFS: Can't find a HFS filesystem on dev sde1.
VFS: Can't find ext3 filesystem on dev sde1.
VFS: Can't find ext2 filesystem on dev sde1.
ReiserFS: sde1: found reiserfs format "3.6" with standard journal
ReiserFS: sde1: using ordered data mode
ReiserFS: sde1: journal params: device sde1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sde1: checking transaction log (sde1)
ReiserFS: sde1: Using r5 hash to sort names
UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'SUCR', timestamp
2000/02/02 05:00 (1f10)
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1248
UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume '2001N4F7',
timestamp 1998/07/16 16:27 (1f10)
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1192
Buffer I/O error on device hdc, logical block 298
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1196
Buffer I/O error on device hdc, logical block 299
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1200
Buffer I/O error on device hdc, logical block 300
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1204
Buffer I/O error on device hdc, logical block 301
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1208
Buffer I/O error on device hdc, logical block 302
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1212
Buffer I/O error on device hdc, logical block 303
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1216
Buffer I/O error on device hdc, logical block 304
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1220
Buffer I/O error on device hdc, logical block 305
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1224
Buffer I/O error on device hdc, logical block 306
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1228
Buffer I/O error on device hdc, logical block 307
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1232
Buffer I/O error on device hdc, logical block 308
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1236
Buffer I/O error on device hdc, logical block 309
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 1248
UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume '2001N4F7',
timestamp 1998/07/16 16:27 (1f10)
More information about the ubuntu-users
mailing list