Thinkpad 600E install

[Nathan Blackham]

On Wed, 2004-10-06 at 17:25 -0700, Matt Zimmerman wrote:
> On Tue, Oct 05, 2004 at 10:44:07AM -0600, Nathan Blackham wrote:
> 
> > Discover recognizes the device as CS46xx driver for the sound card.
> > This doesn't work as the chip is a CS4239 I believe.  The sites that I
> > have found tell me that it will work with the CS4232 driver.  Is there
> > an easy way to get discover to recognize it as a CS4232 rather than the
> > CS46xx?
> 
> Assuming it is a PCI device, send the output from "lspci" and "lspci -n" and
> we'll see what can be done about this.
> 
> -- 
>  - mdz
> 
lspci --
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (rev 03)
0000:00:02.0 CardBus bridge: Texas Instruments PCI1251A
0000:00:02.1 CardBus bridge: Texas Instruments PCI1251A
0000:00:04.0 PCI bridge: IBM 20H2999 PCI Docking Bridge (rev 08)
0000:00:06.0 Multimedia audio controller: Cirrus Logic CS 4610/11
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
0000:00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev
01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:01:00.0 VGA compatible controller: Neomagic Corporation NM2200
[MagicGraph 256AV] (rev 20)
0000:08:00.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
0000:08:00.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:08:00.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev
01)
0000:08:00.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
0000:08:01.0 SCSI storage controller: Adaptec AIC-7861 (rev 03)
0000:08:02.0 CardBus bridge: Texas Instruments PCI1250 (rev 01)
0000:08:02.1 CardBus bridge: Texas Instruments PCI1250 (rev 01)
0000:09:00.0 Ethernet controller: 3Com Corporation 3cCFE575BT Megahertz
10/100 LAN CardBus [Cyclone] (rev 01)

lspci -n
0000:00:00.0 Class 0600: 8086:7190 (rev 03)
0000:00:01.0 Class 0604: 8086:7191 (rev 03)
0000:00:02.0 Class 0607: 104c:ac1d
0000:00:02.1 Class 0607: 104c:ac1d
0000:00:04.0 Class 0604: 1014:0095 (rev 08)
0000:00:06.0 Class 0401: 1013:6001 (rev 01)
0000:00:07.0 Class 0680: 8086:7110 (rev 02)
0000:00:07.1 Class 0101: 8086:7111 (rev 01)
0000:00:07.2 Class 0c03: 8086:7112 (rev 01)
0000:00:07.3 Class 0680: 8086:7113 (rev 02)
0000:01:00.0 Class 0300: 10c8:0005 (rev 20)
0000:08:00.0 Class 0601: 8086:7110 (rev 01)
0000:08:00.1 Class 0101: 8086:7111 (rev 01)
0000:08:00.2 Class 0c03: 8086:7112 (rev 01)
0000:08:00.3 Class 0680: 8086:7113 (rev 01)
0000:08:01.0 Class 0100: 9004:6178 (rev 03)
0000:08:02.0 Class 0607: 104c:ac16 (rev 01)
0000:08:02.1 Class 0607: 104c:ac16 (rev 01)
0000:09:00.0 Class 0200: 10b7:5157 (rev 01)


I have added snd-cs46xx to the blacklist of alsa and told discover.conf
to skip those modules so they don't start up.

NAthan