laptop - Compaq N610c acpi cpu fan

Fri Oct 1 23:30:54 UTC 2004

I preformed a "apt-get update" and "apt-get dist-upgrade".  But I am
still having the CPU throttling problem.

My sources.list contains
deb http://archive.ubuntu.com/ubuntu/ warty main restricted
deb-src http://archive.ubuntu.com/ubuntu/ warty main restricted

## Uncomment the following two lines to fetch updated software from the network
## and be able to use more than 12000 unsupported packages from the
universe archive.
deb http://archive.ubuntu.com/ubuntu/ warty main restricted universe
# deb-src http://archive.ubuntu.com/ubuntu/ warty main restricted universe

deb http://security.ubuntu.com/ubuntu/ warty-security main restricted
deb-src http://security.ubuntu.com/ubuntu/ warty-security main restricted

And another dmesg output.
~ $ dmesg
Linux version 2.6.8.1-2-386 (buildd at mcmurdo) (gcc version 3.3.4
(Debian 1:3.3.4-9ubuntu5)) #1 Sat Sep 18 09:49:53 BST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
 BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved)
 BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS)
 BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131024
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126928 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro quiet splash acpi=off
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1993.851 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 511812k/524096k available (1331k kernel code, 11540k reserved,
725k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3940.35 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000
CPU: After vendor identify, caps:  bfebf9ff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps:        bfebf9ff 00000000 00000000 00000080
CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4112k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf03a2, last bus=4
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f4980
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x49ae, dseg 0xf0000
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/248c] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:02:06.1 doesn't match PIRQ mask - try
pci=usepirqmaskPCI: Found IRQ 11 for device 0000:02:06.1
PCI: Sharing IRQ 11 with 0000:02:06.0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4112 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
vesafb: probe of vesafb0 failed with error -6
thermal: Unknown symbol acpi_processor_set_thermal_limit
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
PCI: Assigned IRQ 11 for device 0000:00:1f.1
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x4440-0x4447, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x4448-0x444f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK3021GAS, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 58605120 sectors (30005 MB), CHS=58140/16/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
hdc: Compaq DVD-ROM SD-C2612, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2: I/O resource 0x3EE-0x3EE not free.
ide2: ports already in use, skipping probe
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 500936k swap on /dev/hda5.  Priority:-1 extents:1
EXT3 FS on hda1, internal journal
Synaptics Touchpad, model: 1
 Firmware: 5.8
 180 degree mounted touchpad
 Sensor: 27
 new absolute packet format
 Touchpad has extended capability bits
 -> multifinger detection
 -> palm detection
 -> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
serio: Synaptics pass-through port at isa0060/serio4/input0
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
input: PS/2 Generic Mouse on synaptics-pt/serio0
hdc: ATAPI 24X DVD-ROM drive, 192kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x50
cdrom: open failed.
input: PC Speaker
Real Time Clock Driver v1.12
irda_init()
NET: Registered protocol family 23
inserting floppy driver for 2.6.8.1-2-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 256M @ 0x60000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.C045 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.C045 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
hw_random: RNG not detected
pciehp: acpi_pciehprm:\_SB_.C045 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.C045 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
PCI: Found IRQ 11 for device 0000:00:1f.5
PCI: Sharing IRQ 11 with 0000:02:04.0
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49422 usecs
intel8x0: clocking to 48000
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 0000:02:06.0
PCI: Sharing IRQ 11 with 0000:02:06.1
Yenta: CardBus bridge found at 0000:02:06.0 [0e11:00b7]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000006
PCI: Found IRQ 11 for device 0000:02:06.1
PCI: Sharing IRQ 11 with 0000:02:06.0
Yenta: CardBus bridge found at 0000:02:06.1 [0e11:00b7]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.1, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000006
e100: Intel(R) PRO/100 Network Driver, 3.0.18
e100: Copyright(c) 1999-2004 Intel Corporation
PCI: Found IRQ 10 for device 0000:02:08.0
PCI: Sharing IRQ 10 with 0000:02:0e.0
PCI: Sharing IRQ 10 with 0000:02:0e.1
PCI: Sharing IRQ 10 with 0000:02:0e.2
e100: eth0: e100_probe: addr 0x40100000, irq 10, MAC addr 00:02:A5:BC:26:74
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V.
Savochkin <saw at saw.sw.com.sg> and others
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
PCI: Found IRQ 10 for device 0000:02:0e.0
PCI: Sharing IRQ 10 with 0000:02:08.0
PCI: Sharing IRQ 10 with 0000:02:0e.1
PCI: Sharing IRQ 10 with 0000:02:0e.2
ohci_hcd 0000:02:0e.0: NEC Corporation USB
ohci_hcd 0000:02:0e.0: irq 10, pci mem e0a0b000
ohci_hcd 0000:02:0e.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
PCI: Found IRQ 10 for device 0000:02:0e.1
PCI: Sharing IRQ 10 with 0000:02:08.0
PCI: Sharing IRQ 10 with 0000:02:0e.0
PCI: Sharing IRQ 10 with 0000:02:0e.2
ohci_hcd 0000:02:0e.1: NEC Corporation USB (#2)
ohci_hcd 0000:02:0e.1: irq 10, pci mem e0a37000
ohci_hcd 0000:02:0e.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:02:0e.2
PCI: Sharing IRQ 10 with 0000:02:08.0
PCI: Sharing IRQ 10 with 0000:02:0e.0
PCI: Sharing IRQ 10 with 0000:02:0e.1
ehci_hcd 0000:02:0e.2: NEC Corporation USB 2.0
ehci_hcd 0000:02:0e.2: irq 10, pci mem e0a39000
ehci_hcd 0000:02:0e.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:02:0e.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02c95c0(lo)
IPv6 over IPv4 tunneling driver
cs: IO port probe 0x0100-0x04ff: excluding 0x100-0x107 0x140-0x14f 0x4d0-0x4d7
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
acpi: Unknown symbol acpi_processor_unregister_performance
acpi: Unknown symbol acpi_processor_register_performance
eth0: no IPv6 routers present
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies
Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode

--
joseph