Wireless

[Carthik Sharma]

Is your eth0 running, if yes, disconnect the LAN cable, and reboot, or
do /etc/init.d/networking restart.

Edit the /etc/network/interfaces file to have the correct values for
your eth1 wireless connection.


On Mon, 6 Dec 2004 01:02:35 -0500, Lennart Andersen <lennart at rogers.com> wrote:
> Can anyone tell my why my Truemobil 1150 in Dell c400 won't load...?
> 
> If I do  cat /var/run/stab I get this
> 
> root at lnux3:/home/lennart # cat /var/run/stab
> Socket 0: empty
> Socket 1: Intersil PRISM2 11 Mbps Wireless Adapter
> 
> ----------------------------------------------------
> 
> root at lnux3:/home/lennart # ifup eth1
> Error for wireless request "Set Encode" (8B2A) :
> SET failed on device eth1 ; No such device.
> Error for wireless request "Set ESSID" (8B1A) :
> SET failed on device eth1 ; No such device.
> Internet Systems Consortium DHCP Client V3.0.1rc14
> Copyright 2004 Internet Systems Consortium.
> All rights reserved.
> For info, please visit http://www.isc.org/products/DHCP
> SIOCSIFADDR: No such device
> eth1: ERROR while getting interface flags: No such device
> eth1: ERROR while getting interface flags: No such device
> sit0: unknown hardware address type 776
> Bind socket to interface: No such device
> Failed to bring up eth1.
> 
> --
> Regards,
> --
>  Lennart Andersen
>  St Thomas, Ontario
>  lennart at rogers dot com
> --------------------------
>   - Ubuntu - when you have better things to do than
>       fixing a system
> 
> --
> ubuntu-users mailing list
> ubuntu-users at lists.ubuntu.com
> http://lists.ubuntu.com/mailman/listinfo/ubuntu-users
> 


-- 
When nothing is done, nothing is left undone -- 老子 Lǎozi

University of Central Florida
Homepage: http://carthik.net