[ubuntu-us-nm] Question

Steve Katona srtraveler at gmail.com
Mon Oct 18 18:57:10 BST 2010


Here's the output:

steve at StevesConfuser:~$ lspci -vvv
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub
Interface (rev 02)
    Subsystem: Dell Device 01d5
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
    Capabilities: <access denied>
    Kernel driver in use: agpgart-intel
    Kernel modules: intel-agp

00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated
Graphics Controller (rev 02)
    Subsystem: Dell Device 01d5
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
    Region 1: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
    Region 2: I/O ports at ed98 [size=8]
    Capabilities: <access denied>
    Kernel driver in use: i915
    Kernel modules: i915

00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O
Memory Interface (rev 02)
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
    Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]

00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #1 (rev 02)
    Subsystem: Dell Device 01d5
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 4: I/O ports at ff80 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #2 (rev 02)
    Subsystem: Dell Device 01d5
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 19
    Region 4: I/O ports at ff60 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #4 (rev 02)
    Subsystem: Dell Device 01d5
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 4: I/O ports at ff20 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller (rev 02) (prog-if 20)
    Subsystem: Dell Device 01d5
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin D routed to IRQ 23
    Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: fea00000-feafffff
    Prefetchable memory behind bridge: fff00000-000fffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Kernel modules: shpchp

00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface
Bridge (rev 02)
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller (rev 02) (prog-if 8a [Master SecP PriP])
    Subsystem: Dell Device 01d5
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 18
    Region 0: I/O ports at 01f0 [size=8]
    Region 1: I/O ports at 03f4 [size=1]
    Region 2: I/O ports at 0170 [size=8]
    Region 3: I/O ports at 0374 [size=1]
    Region 4: I/O ports at ffa0 [size=16]
    Region 5: Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K]
    Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller
(rev 02)
    Subsystem: Dell Device 01d5
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin B routed to IRQ 3
    Region 4: I/O ports at eda0 [size=32]
    Kernel modules: i2c-i801

00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller (rev 02)
    Subsystem: Dell Device 01d5
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 17
    Region 0: I/O ports at ee00 [size=256]
    Region 1: I/O ports at edc0 [size=64]
    Region 2: Memory at feb7fa00 (32-bit, non-prefetchable) [size=512]
    Region 3: Memory at feb7f900 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>
    Kernel driver in use: Intel ICH
    Kernel modules: snd-intel8x0

01:01.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI (rev
04)
    Subsystem: Dell Device 1000
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping+ SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (250ns min, 15500ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 22
    Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at de00 [size=256]
    Capabilities: <access denied>
    Kernel driver in use: serial

01:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet
Controller (rev 02)
    Subsystem: Dell Device 01d5
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at ddc0 [size=64]
    Capabilities: <access denied>
    Kernel driver in use: e100
    Kernel modules: e100



On Mon, Oct 18, 2010 at 11:47 AM, David Einerson <deinerson1 at gmail.com>wrote:

> Steve, I was not able to access the pastebin link, please send again.
>
> On Mon, Oct 18, 2010 at 11:25 AM, Steve Katona <srtraveler at gmail.com>wrote:
>
>> Here's what I'm going to do: I will upgrade to 10.04 via update manager. I
>> will disable compiz. If I crash, I'll look at the syslog. I'll try to open
>> another console if I freeze via Alt-F2. I did enquire for drivers and got
>> the message no proprietary drivers on this system. I have copied and pasted
>> the output of lspci -vvv to the enclosed link--paste.ubuntu.com with my
>> email address as the poster. Please let me know if this sounds like a good
>> plan.
>>
>>
>> On Mon, Oct 18, 2010 at 10:16 AM, Kurt von Finck <mneptok at mneptok.com>wrote:
>>
>>> On Mon, Oct 18, 2010 at 10:02 AM, Steve Katona <srtraveler at gmail.com>
>>> wrote:
>>> > I have posted this general question numerous times on the Ubuntu forums
>>> > without a single reply. Not whining just wondering if anyone has an
>>> answer.
>>> > Here's my problem: using a Dell Dimension B110 with Celeron, 2G RAM,
>>> 63G
>>> > available HD, single boot Ubuntu 9.10. I have been using Ubuntu since
>>> V. 6
>>> > w/o too many problems. Both V. 10.04 and V. 10.10 will cause
>>> lockup/freeze
>>> > of keyboard or mouse or screen or any combination that can only be
>>> cured
>>> > with hard reboot. The aplet that forces a misbehaving application to
>>> quit
>>> > also doesn't work to get me out of this. I have now started to see a
>>> > recurring problem with the mouse such that I often have to click more
>>> than
>>> > once to get a response. This is in V. 9.10. I am using a MS wireless
>>> optical
>>> > mouse (1007) and MS Optical Photo Keyboard (1027). I've had this setup
>>> for
>>> > several years.
>>> >
>>> > I'm thinking of getting a new computer from ZaReason (they assure me
>>> > everything will work perfectly with their equipment although they want
>>> me to
>>> > buy their keyboard and mouse. Doesn't seem unreasonable) or trying
>>> another
>>> > Linux flavor--Mandrake?? Any comments would be appreciated...sk
>>>
>>> Try the following:
>>>
>>> 1). Disable Compiz via System > Preferences > Appearance > Desktop
>>> Effects. Choose None. Restart and see what happens.
>>>
>>> 2). Look at what video chipset you have and what driver for it. System
>>> > Administration > Hardware Drivers will let you know if there are
>>> non-free drivers in use on your system. Disable if they are being
>>> used, enable them if not. See if this makes a difference. In a
>>> terminal, type "lspci -vvv" and copy/paste the output to
>>> http://paste.ubuntu.com. Please give us the URL for your paste. The
>>> we'll know what hardware you have.
>>>
>>> 3). Does ALT-F2 bring you to another console during these GUI freezes?
>>>
>>> 4). What happens when you boot from a live CD (or DVD)? if you run a
>>> live session for some time does the same behavior happen?
>>>
>>> Thanks!
>>>
>>> --
>>> ./k
>>>
>>> kurt von finck
>>>
>>> http://www.mneptok.com
>>>
>>> Music is the space between the notes. - Debussy
>>>
>>> --
>>> ubuntu-us-nm mailing list
>>> ubuntu-us-nm at lists.ubuntu.com
>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-us-nm
>>>
>>
>>
>>
>> --
>> Retired dilettante, recumbent bike rider, Registered Linux user #500676,
>> Registered Ubuntu user #29795
>>
>> --
>> ubuntu-us-nm mailing list
>> ubuntu-us-nm at lists.ubuntu.com
>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-us-nm
>>
>>
>
>
> --
> Dave Einerson
> 505-750-1878
> www.davideinerson.name
>
> --
> ubuntu-us-nm mailing list
> ubuntu-us-nm at lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-us-nm
>
>


-- 
Retired dilettante, recumbent bike rider, Registered Linux user #500676,
Registered Ubuntu user #29795
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://lists.ubuntu.com/archives/ubuntu-us-nm/attachments/20101018/b055f5c9/attachment-0001.htm 


More information about the ubuntu-us-nm mailing list